Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
canon pc-20 problems
on the left side of the machine's interior, looking from the end where
paper comes out, are a series of white and black plastic gear wheels; there is a 1 inch steel (?) bar that sticks out toward where the toner cartridge sits when machine is closed. At the end of this bar is a very short (1/2 in) spring that is hanging free; cannot see any place where it should attach to. info, please? also, there is a lot of extremely sticky ink residue around the final paper feed wheels just before the green drying unit; this has left residue on the red feed bar under the drying unit, and paper now comes out vertically wrinkled. any suggestions on either of the above will be greatly appreciated. zk |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Canon IP4000 | Electronics Repair | |||
Canon won't fire! | UK diy | |||
Canon GL2 problems | Electronics Repair | |||
Canon inkjet | Electronics Repair | |||
Canon Inkjet | Electronics Repair |