canon pc-20 problems
on the left side of the machine's interior, looking from the end where
paper comes out, are a series of white and black plastic gear wheels; there is a 1 inch steel (?) bar that sticks out toward where the toner cartridge sits when machine is closed. At the end of this bar is a very short (1/2 in) spring that is hanging free; cannot see any place where it should attach to. info, please? also, there is a lot of extremely sticky ink residue around the final paper feed wheels just before the green drying unit; this has left residue on the red feed bar under the drying unit, and paper now comes out vertically wrinkled. any suggestions on either of the above will be greatly appreciated. zk |
All times are GMT +1. The time now is 03:43 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter