Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Problem in image of CPD-E500E Sony Monitor
Hi to everybody!
In this link you can d/load the manual: http://www.scooterclub-nolimits.it/E500.pdf The monitor had a problem. I had fixed a previous, overbright problem using WinDAS. I thinked that I can solve also this problem of distorsion of the image, but it is not possible via software. The problem is rappresented in this paint: http://img181.imageshack.us/my.php?image=monitorjx9.jpg The monitor had a distorsion on the top and bottom right corner: in this corner, the image is also out of convergence and out of focus. If i set focus (in FBT) and convergence (using OSD) to see clearly in those corner, the image is, f course, out of convergence and out of focut in the ather parts of the screen. The screen seem "hitted": like the regulation of trapezoid, but in the top and in the bottom part of the screen...and is impossible to correct it using the OSD regulations. Do you have any tips..? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sony CPD-E530 monitor contrast going | Electronics Repair | |||
How to open Sony Monitor CPD-E250 ?! | Electronics Repair | |||
SONY CPD-100SFT Monitor Hsync problem. | Electronics Repair | |||
Pb with Sony CPD-20SF2T Monitor | Electronics Repair | |||
Sony CPD-E220 Monitor Fault..help | Electronics |