 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Canon iP4000 Power Supply Problem
I'm having a problem with a Canon printer not powering up. I have the power
supply out and the primary side of the switch mode PS is fine and the 12v line has 12 volts on the secondary side, does anyone know what the other pinout voltages should be? Are the any common problems with these power supplies? (The board has 2 numbers on it, PS-A125 and P1221) -Brian |
|
#2
Posted to sci.electronics.repair
|
|||
|
|||
|
Canon iP4000 Power Supply Problem
I'm having a problem with a Canon printer not powering up
http://www.repairfaq.org/REPAIR/F_SwitcherPS.html -- Al, the usual |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Canon IP4000 | Electronics Repair | |||
| UPDATE: "Problem with Canon Pixma ip4000 printer" | Electronics Repair | |||
| Problem with Canon Pixma ip4000 printer | Electronics Repair | |||
| Canon Pixma IP 2000 Power Supply - part number K30229 | Electronics Repair | |||
| Power supply pinout for Canon MV450i Camcorder | Electronics Repair | |||
Linear Mode
