Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
goodguy
 
Posts: n/a
Default Sony CD Changer Problems

Okay, I'll add my two cents to the older posts...I have started having
problems with my Sony CDP CX355 ("Mega Storage 300 CD). It was playing
fine up until a couple of weeks ago, UNTIL: it began playing a disc,
then jumping around on the disc, and then skipping to the next
disc...same thing would happen. Sounds like this is a very common
issue. I cleaned all the discs, even tried brand new ones.
Ironically, this problem started happening two weeks after the end of
the 1-year warranty (Sony must really know what it's doing :-(
Anyway, called a local authorized dealer and one I found online and
both said that it isn't worth fixing (I paid $180 for it, new.) I
can't believe that this is a throw-away. Some of what I've been able
to learn online is that dust and dirt can cause some of these issues.
Problem is, I don't know what I need to clean. I hear laser pickup
and objective lens and tracker, and mirror, but I am not sure where
these are located, let alone how to clean. I suspect the problem is
dust, because the house is dusty, but I need some good counsel here.
Please give me some suggestions if you can help a neophyte fix this! I
hate throwing more money at this.
John

  #2   Report Post  
Posted to sci.electronics.repair
Dani
 
Posts: n/a
Default Sony CD Changer Problems

Quite likely the laser part # A3328818A, KSM 213 BFN/C2NP that's the
laser, with spindle motor & sled motor complete. It's about $ 56.00 US
retail, plus shipping & taxes,just for the part. It could cost you
close to
the price you qouted, unless you have a pal in the business. If it's
bad,
it's just as well to replace the whole laser mechanism...& it IS worth
repairing,as long as it's in good condition! Did you clean it
properly?
Dani.


goodguy wrote:
Okay, I'll add my two cents to the older posts...I have started having
problems with my Sony CDP CX355 ("Mega Storage 300 CD). It was playing
fine up until a couple of weeks ago, UNTIL: it began playing a disc,
then jumping around on the disc, and then skipping to the next
disc...same thing would happen. Sounds like this is a very common
issue. I cleaned all the discs, even tried brand new ones.
Ironically, this problem started happening two weeks after the end of
the 1-year warranty (Sony must really know what it's doing :-(
Anyway, called a local authorized dealer and one I found online and
both said that it isn't worth fixing (I paid $180 for it, new.) I
can't believe that this is a throw-away. Some of what I've been able
to learn online is that dust and dirt can cause some of these issues.
Problem is, I don't know what I need to clean. I hear laser pickup
and objective lens and tracker, and mirror, but I am not sure where
these are located, let alone how to clean. I suspect the problem is
dust, because the house is dusty, but I need some good counsel here.
Please give me some suggestions if you can help a neophyte fix this! I
hate throwing more money at this.
John


  #3   Report Post  
Posted to sci.electronics.repair
Arfa Daily
 
Posts: n/a
Default Sony CD Changer Problems


"goodguy" wrote in message
ps.com...
Okay, I'll add my two cents to the older posts...I have started having
problems with my Sony CDP CX355 ("Mega Storage 300 CD). It was playing
fine up until a couple of weeks ago, UNTIL: it began playing a disc,
then jumping around on the disc, and then skipping to the next
disc...same thing would happen. Sounds like this is a very common
issue. I cleaned all the discs, even tried brand new ones.
Ironically, this problem started happening two weeks after the end of
the 1-year warranty (Sony must really know what it's doing :-(
Anyway, called a local authorized dealer and one I found online and
both said that it isn't worth fixing (I paid $180 for it, new.) I
can't believe that this is a throw-away. Some of what I've been able
to learn online is that dust and dirt can cause some of these issues.
Problem is, I don't know what I need to clean. I hear laser pickup
and objective lens and tracker, and mirror, but I am not sure where
these are located, let alone how to clean. I suspect the problem is
dust, because the house is dusty, but I need some good counsel here.
Please give me some suggestions if you can help a neophyte fix this! I
hate throwing more money at this.
John


The only thing cleanable with the type of laser fitted to that player, is
the lens itself. With the player at rest, and no disc loaded, if you look
for the small turntable that the disc rotates on when it is playing, then
look below that, ( actually to the side as the deck is vertical ) you will
see a black 'boxy' sort of structure, a couple of cms square. That is the
top of the optical block ( laser ) and the lens is in the midle of that.
Clean it with something like a Q-Tip moistened, not soaked, in electronics
grade ( 99.7% ) isopropyl alcohol. Then polish with a dry Q-Tip. Don't be
too violent, as the lens suspension is moderately delicate, but not so much
so that you have to be particularly frightened of it.

Failing that, you could replace the laser - it's from the cheap-enough KSS
series, carried as Sony original and generic pattern by many suppliers, and
a little label on the back tells you which one exactly it is eg KSS 213C or
213D etc. Alternatively, you might want to replace the deck as a complete
assembly. Although there is no mechanical alignment to carry out when
replacing these lasers, and it is an easy enough job to do, by replacing the
whole deck, you do get the added advantage of a new spindle motor, and new
sled motor and drive gears. All depends on how much money you want to spend
on it really.

Arfa


  #4   Report Post  
Posted to sci.electronics.repair
goodguy
 
Posts: n/a
Default Sony CD Changer Problems

I could use some guidance on cleaning procedures...thanks.

Dani wrote:
Quite likely the laser part # A3328818A, KSM 213 BFN/C2NP that's the
laser, with spindle motor & sled motor complete. It's about $ 56.00 US
retail, plus shipping & taxes,just for the part. It could cost you
close to
the price you qouted, unless you have a pal in the business. If it's
bad,
it's just as well to replace the whole laser mechanism...& it IS worth
repairing,as long as it's in good condition! Did you clean it
properly?
Dani.


goodguy wrote:
Okay, I'll add my two cents to the older posts...I have started having
problems with my Sony CDP CX355 ("Mega Storage 300 CD). It was playing
fine up until a couple of weeks ago, UNTIL: it began playing a disc,
then jumping around on the disc, and then skipping to the next
disc...same thing would happen. Sounds like this is a very common
issue. I cleaned all the discs, even tried brand new ones.
Ironically, this problem started happening two weeks after the end of
the 1-year warranty (Sony must really know what it's doing :-(
Anyway, called a local authorized dealer and one I found online and
both said that it isn't worth fixing (I paid $180 for it, new.) I
can't believe that this is a throw-away. Some of what I've been able
to learn online is that dust and dirt can cause some of these issues.
Problem is, I don't know what I need to clean. I hear laser pickup
and objective lens and tracker, and mirror, but I am not sure where
these are located, let alone how to clean. I suspect the problem is
dust, because the house is dusty, but I need some good counsel here.
Please give me some suggestions if you can help a neophyte fix this! I
hate throwing more money at this.
John


  #5   Report Post  
Posted to sci.electronics.repair
Sofie
 
Posts: n/a
Default Sony CD Changer Problems

You can go to the website for this newsgroup at
http://www.repairfaq.org/
there, with some of your search time, you will find a wealth of repair
information and troubleshooting tips.... AND the proper and safe cleaning
procedure for your CD player.
Daniel Sofie
Electronics Supply & Repair
- - - - - - - - - - - - -

snipped:
"goodguy" wrote in message
oups.com...
I could use some guidance on cleaning procedures...thanks.




Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sony KV-2670 R has problems and is probably dead but please confirm John Stevens Electronics Repair 4 August 2nd 05 01:32 AM
Problems with the Sony 30 Wegas? oddvark Electronics Repair 8 April 12th 05 02:53 PM
Possible problems with Sony VCR (model slvn750) Jerry G. Electronics Repair 8 December 31st 04 07:19 PM
SONY TRINITON TV PROBLEMS David Electronics Repair 1 June 21st 04 03:17 AM
problems getting cable channels on a sony tv Sofie Electronics Repair 10 July 18th 03 03:03 AM


All times are GMT +1. The time now is 06:25 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"