Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#2
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]()
On Wed, 14 Jun 2006 21:54:09 +1000, "prolater"
put finger to keyboard and composed: Hi, is there anyone out there that can identify this part please or point me in the direction to get more info, I am chasing the pdf or specs on this device. I have searched the net on a few occasions with no luck so any would be great. From what I can see it is a multiple LED module(approx 4 x 18) which I assume maybe serially controlled via a Micro(uP), it has 6 pins for connection. I assume under the black blob is an IC I would imagine something serial orientated or maybe even I2C due to the low Pin count. Any help on a pdf or device part number or identification would be appreciated. Thanks for any help Prolater These links are to a couple of pics of the front and back. http://i58.photobucket.com/albums/g2...ater/front.jpg http://i58.photobucket.com/albums/g2...later/Back.jpg FWIW, usbid.com shows Siemens as the manufacturer of the CDM101-105-006B. - Franc Zabkar -- Please remove one 'i' from my address when replying by email. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
2 Part Epoxy vs. One Part for Garage floor? | Home Repair | |||
Help finding old router part | Woodworking | |||
Identify this part? | Home Repair | |||
Part P Proto-FAQ | UK diy | |||
Part P - new cable colours | UK diy |