When I Initialy turn on the TV using the remote control the initial
setup menu has been popping up.
No power losses. No flashing clocks in the house. Not sure were to
start.

Thanks

RJ

Contaminated Tac switches...Very common.
They need to be replaced.

kip

"RJ" wrote in message
oups.com...
When I Initialy turn on the TV using the remote control the initial
setup menu has been popping up.
No power losses. No flashing clocks in the house. Not sure were to
start.

Thanks

RJ

Would you happen to have a part number? Wich ones do I replace.
Are these on the remote control or the front panel?

Would opening the remote and cleaning under the rubber pad help. I have
a plastic tool I use to open cell phones that works pretty good on
remotes.

Thanks for the help

RJ

there may be problem in the STK(power control) part of your TV . If it
is so call to the company's service center and do replace it from them .

Windex syndrome? Kip is likely correct. Look to the control panel in the
set for bad switches.

Leonard

"RJ" wrote in message
oups.com...
When I Initialy turn on the TV using the remote control the initial
setup menu has been popping up.
No power losses. No flashing clocks in the house. Not sure were to
start.

Thanks

RJ

Sony part number is 1-692-431-21
kip
"Leonard Caillouet" wrote in message
. ..
Windex syndrome? Kip is likely correct. Look to the control panel in the
set for bad switches.

Leonard

"RJ" wrote in message
oups.com...
When I Initialy turn on the TV using the remote control the initial
setup menu has been popping up.
No power losses. No flashing clocks in the house. Not sure were to
start.

Thanks

RJ