Unfortunely i have did wath you aren't supposed to doo. I messed with
the
service menu on my Sony KV-X2993E 29" 100Hz television. The problem is
that
under TDA 4686/4780 i turned off the FSW 2 DIS , and then the auto cut
off also
turned off. I turned auto cut off back on but then the on-screen menu
turned
almost black. Then i found out that when i put FSW 2 to on the manu
becomes
visible but the real picture goes black. I can't put the FSW 2 DIS
back on, it
is stucked to off. Is there anything i can do? I can't make both the
menu and the normal picture visible at the same time. Please help
me...

I like it !!! I like it !!!

kip
"Lanzar" wrote in message
om...
Unfortunely i have did wath you aren't supposed to doo. I messed with
the
service menu on my Sony KV-X2993E 29" 100Hz television. The problem is
that
under TDA 4686/4780 i turned off the FSW 2 DIS , and then the auto cut
off also
turned off. I turned auto cut off back on but then the on-screen menu
turned
almost black. Then i found out that when i put FSW 2 to on the manu
becomes
visible but the real picture goes black. I can't put the FSW 2 DIS
back on, it
is stucked to off. Is there anything i can do? I can't make both the
menu and the normal picture visible at the same time. Please help
me...

Take set to a professional SONY Service, tell then what you did, and pay the
service charges.
"kip" wrote in message
.. .
I like it !!! I like it !!!

kip
"Lanzar" wrote in message
om...
Unfortunely i have did wath you aren't supposed to doo. I messed with
the
service menu on my Sony KV-X2993E 29" 100Hz television. The problem is
that
under TDA 4686/4780 i turned off the FSW 2 DIS , and then the auto cut
off also
turned off. I turned auto cut off back on but then the on-screen menu
turned
almost black. Then i found out that when i put FSW 2 to on the manu
becomes
visible but the real picture goes black. I can't put the FSW 2 DIS
back on, it
is stucked to off. Is there anything i can do? I can't make both the
menu and the normal picture visible at the same time. Please help
me...

You will have to get the set properly set up, at an authorized Sony service
centre. Each of the sets are different for their values, according to design
tolerances. The cost will be depending on the amount of time it will take
to get things back.

--

JANA
_____


"Lanzar" wrote in message
om...
Unfortunely i have did wath you aren't supposed to doo. I messed with
the
service menu on my Sony KV-X2993E 29" 100Hz television. The problem is
that
under TDA 4686/4780 i turned off the FSW 2 DIS , and then the auto cut
off also
turned off. I turned auto cut off back on but then the on-screen menu
turned
almost black. Then i found out that when i put FSW 2 to on the manu
becomes
visible but the real picture goes black. I can't put the FSW 2 DIS
back on, it
is stucked to off. Is there anything i can do? I can't make both the
menu and the normal picture visible at the same time. Please help
me...

I guess the newbie won't get any sympathy from the techs today.
Free advice to newbies... or anyone:
If you don't know what leever A does then leever B.
--
Best Regards,
Daniel Sofie
Electronics Supply & Repair
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


"Art" wrote in message
...
Take set to a professional SONY Service, tell then what you did, and pay
the
service charges.
"kip" wrote in message
.. .
I like it !!! I like it !!!

kip
"Lanzar" wrote in message
om...
Unfortunely i have did wath you aren't supposed to doo. I messed with
the
service menu on my Sony KV-X2993E 29" 100Hz television. The problem is
that
under TDA 4686/4780 i turned off the FSW 2 DIS , and then the auto cut
off also
turned off. I turned auto cut off back on but then the on-screen menu
turned
almost black. Then i found out that when i put FSW 2 to on the manu
becomes
visible but the real picture goes black. I can't put the FSW 2 DIS
back on, it
is stucked to off. Is there anything i can do? I can't make both the
menu and the normal picture visible at the same time. Please help
me...

I have the TT-code to reset TDA4780, could that help me to then put
back the right tings to ON. I read in the service manual that FSW1
should be ON. But i can't change it. It changes directly back to OFF
by itself... The chassie is AE2F