Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Tech: monitor missing green
I have an arcade game and haven't been able to locate a schematic for
the monitor. It's a Hantarex 25" Polo monitor. Anyway, the green is completely missing. There is a red and blue knob to adjust the colors but no green one. Someone told me that the green is controlled by a resistor and I'm supposed to adjust the red and blue to match that. If that's the case, then is it likely that the resistor could have failed to produce this problem? If so, how would I locate that sucker without a schematic? Or is it more likely to be something else? Bad tube? Etc.? Sumbuddy peas hep me! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Convergence/Vertical Deflection Problem for Green | Electronics Repair | |||
Sony CPD-E200 monitor: blinking GREEN power light | Electronics Repair | |||
Green wire on Dryer? | Home Repair | |||
Bandsaw Blades for milling green timber | Woodworking | |||
Green ooze from house wiring | UK diy |