Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Vital question on 169 HOT shorted.
I have posted the question before and I'm trying again. I had few bad
flyback transformers pass the flyback tester before and blow the HOT and it was not the capacitors & diodes. This P60752EB (CTC/PTK169PE) came in with multiple components that have to be replaced except HOT is shorted that raise the concern. When I come across like this, I replace the flyback transformer and HOT, and other required part replacements. This 169 chassis require four caps replaced in power supply, HV divider block (caused by high B+ due to bad caps), but I have not seen like this plus a bad HOT as well. This make me concerned can customer tried to turn on TV repeatedly eventually that bad HV block clobbered fly and HOT to die or HOT failed but fly still good? Flyback transformer is NLA so I'm worried. That's the whole point of this, I ask: Will that be ok by replacing these HOT, horizontal parts and usual repair job I outlined above? Tell your experience like this particular case. Cheers, Wizard |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Good morning or good evening depending upon your location. I want to ask you the most important question of your life. Your joy or sorrow for all eternity depends upon your answer. The question is: Are you saved? It is not a question of how good | Woodworking | |||
To anyone sick of alt.hvac | Home Repair | |||
OT Guns more Guns | Metalworking | |||
Plumbing Question | UK diy | |||
Question????? | Woodworking |