Looking to buy a socket adapter for a ESI TTL tester. The markings on
the 14 pin socket are BARNES and the manual shows 16 pin socket p/n
20860

Anyone know where to get one?

Thanks

In article .com,
wrote:

Looking to buy a socket adapter for a ESI TTL tester. The markings on
the 14 pin socket are BARNES and the manual shows 16 pin socket p/n
20860

Anyone know where to get one?

Thanks

Is this the tester that had a 4 digit LED readout and which used
digiswitches to select the pins? If so you can probably cobble together
an adaptor youself. I don't know why they designed it the way the did.
If it the one I think it is it had a 16 pin socket and used an adaptor
for 14 pins. You had to take a 16 pin header and then a 14 pin barnes
socket and connect 1 thru 14 from the 16 pin header to 1 thru 14 on the
14 pin socket. They could have done it so that you just put a 14 pin
devise in the 16 pin socket just using the top or bottom 14 pins and
made the correct connections with the digiswitches. Also if it is the
one I am thinking about and your were really ambitious you could recode
the 14 pin devices and plug them into the 16 pin socket.

Chuck P.