Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Servo Lock is jumping on older receiver??
I've got an Optronic (Sharp) SA-5905 and FM stations can't be locked
in... The servo lock light blinks and the signal cuts in and out... Any ideas? |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Servo Lock is jumping on older receiver??
I meant Optonica SA-5905...
|
#3
Posted to sci.electronics.repair
|
|||
|
|||
Servo Lock is jumping on older receiver??
Basically, if it's old, adjust the detector coil. Coils drift.
If it doesn't use ceramic filters, that is there are interstage IF coils or transformers, make SURE you only adjust the detector coil. It takes too long to explain how to do a proper IF alignment on an FM reciever. If you can't identify the right coil don't do it. JURB |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
CNC software highest step rate | Metalworking | |||
Lock required (large backset and other curve balls to overcome)... | UK diy | |||
Patio door lock woes | UK diy | |||
Lock terminology | UK diy | |||
Trouble finding replacement internal door lock | UK diy |