Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
 
Posts: n/a
Default question about horizontal transistors S2000AF & C4542

I got a broken Salora 28E9S TV set. I troubleshooted it and found a
faulty (shorted) horizontal transistor S2000AF. Then I looked my "junk
box" and found a (2S)C4542, but I was unable to find a datasheet to it,
although I attemted to search it by Google for a couple of hours :-( So
if someone knows where to get a datasheet, or if someone just knows can
it be substituted, I would be thankful..

I am just interested because here isn't a component shop in my city, so
I would have to order it, with high delivery costs, or buy it from a
local tv repair shop, where it costs ten times more.. :-|

Thx in advance.

-----
I don't read top-posted messages.

  #2   Report Post  
Posted to sci.electronics.repair
Franc Zabkar
 
Posts: n/a
Default question about horizontal transistors S2000AF & C4542

On 20 Mar 2006 10:48:34 -0800, put finger
to keyboard and composed:

I got a broken Salora 28E9S TV set. I troubleshooted it and found a
faulty (shorted) horizontal transistor S2000AF. Then I looked my "junk
box" and found a (2S)C4542, but I was unable to find a datasheet to it,


http://www.datasheetarchive.com/data...article=404427

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OT Brigs & Stratton Horizontal Shaft Question. Greg O Metalworking 12 May 20th 05 01:48 AM
Horizontal mill question John Hall Metalworking 3 March 10th 05 04:12 PM
OT Guns more Guns Cliff Metalworking 519 December 12th 04 05:52 AM
this ought to get everybody fired up.... mel Woodworking 56 March 29th 04 03:53 PM
Horizontal bandsaw question SteveB Metalworking 12 February 21st 04 10:05 PM


All times are GMT +1. The time now is 11:50 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"