Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
what is the problem with this motherboard...?
the motherboard is installed with intel Celeron when the reset is short ,
it wont reset at all. The reset lead has 3.29 V. In the false loading, it does not has the 3.3 V in the reset pin. |
#2
Posted to sci.electronics.repair
|
|||
|
|||
what is the problem with this motherboard...?
the circuit is traced and it was found that just it before it goes to a
southbridge there is a resistor. the oncircuit measurement of the resistor is 9.7k. But the voltage is 3.3 V on one side and the side of the resistor has zero voltage. SO what is wrong here? |
#3
Posted to sci.electronics.repair
|
|||
|
|||
what is the problem with this motherboard...?
On Tue, 7 Mar 2006 06:59:02 +0800, "fixpc" wrote:
the circuit is traced and it was found that just it before it goes to a southbridge there is a resistor. the oncircuit measurement of the resistor is 9.7k. But the voltage is 3.3 V on one side and the side of the resistor has zero voltage. SO what is wrong here? The other southbridge side of the resistor is at ground. Tom |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Hot water furnace problem. | Home Ownership | |||
Hot water furnace problem. | Home Repair | |||
SONY 35" Dual PIP -Video Blackout Problem | Electronics Repair | |||
Widespread problem with HP Omnibook XE3-GFs? | Electronics Repair | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair |