what is the problem with this motherboard...?
the motherboard is installed with intel Celeron when the reset is short ,
it wont reset at all. The reset lead has 3.29 V. In the false loading, it does not has the 3.3 V in the reset pin. |
what is the problem with this motherboard...?
the circuit is traced and it was found that just it before it goes to a
southbridge there is a resistor. the oncircuit measurement of the resistor is 9.7k. But the voltage is 3.3 V on one side and the side of the resistor has zero voltage. SO what is wrong here? |
what is the problem with this motherboard...?
On Tue, 7 Mar 2006 06:59:02 +0800, "fixpc" wrote:
the circuit is traced and it was found that just it before it goes to a southbridge there is a resistor. the oncircuit measurement of the resistor is 9.7k. But the voltage is 3.3 V on one side and the side of the resistor has zero voltage. SO what is wrong here? The other southbridge side of the resistor is at ground. Tom |
All times are GMT +1. The time now is 02:30 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter