Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
 
Posts: n/a
Default AWA tv repaired - 3 times still not working right:(

hi
i've had to get my relatively new AWA tv model W571 repaired now 3
times and it's still not working right. $200 out of pocket and 10 days
with no tv((((( F***!
problem is perfect sound but no picture just a blue screen with white
lines going across it.When you first turn on tv there is a faint
picture like looking through a photograph negative,then within 5
seconds that goes leaving just the blue screen with the white lines.
Repair guy gets it going in workshop leaves it running for several
hours but whenever i get it back it goes again.First time i got it back
it was ok for 4 days the second time i got it back within an hour the
same problem ocurred.
Trying to read original repair warranty is difficult because of
handwriting but there are references to ''blue screen and flybook
line''s.''Trace features to picture tube and tube socket''.
''Dislodge internal foreign material,'' then something that looks like
''heaters to cathode'',''short circuit on blue gun'' ''repair tele
socket on picture circuit board'' ''replace heater dropping resistor &
check plater circuit'' ''very extensive bench test''.

The tv is only 14 months old
I could get someone else to look at it but then i have to start all
over again money-wise and i've already paid $200!
Does anybody have any suggestions?
thanks
p***ed off tv viewer((

  #2   Report Post  
Posted to sci.electronics.repair
Tech Data
 
Posts: n/a
Default AWA tv repaired - 3 times still not working right:(

If you've got a heater to cathode short, there is no repairing by
conventional methods. Even a crt rejuvinator can't remove those shorts.
The only way to do it, and it's not always 100%, is to defeat the
heater line to the crt, meaning any path to chassis ground, and do a
wire wrap around the core of the flyback. You're creating a new heater
line free of the circuit ground. The cathode can short to the heater
all day long and won't make a difference.

  #3   Report Post  
Posted to sci.electronics.repair
 
Posts: n/a
Default AWA tv repaired - 3 times still not working right:(

well hopefully the technicial knows this?But maybe he only works along
''conventional methods? How would you know.?!
It sounds like from your post (not a criticism btw) that the tv can't
be fixed?

  #4   Report Post  
Posted to sci.electronics.repair
kip
 
Posts: n/a
Default AWA tv repaired - 3 times still not working right:(

Take it back to them if you have payed them money...yikes.


wrote in message
oups.com...
hi
i've had to get my relatively new AWA tv model W571 repaired now 3
times and it's still not working right. $200 out of pocket and 10 days
with no tv((((( F***!
problem is perfect sound but no picture just a blue screen with white
lines going across it.When you first turn on tv there is a faint
picture like looking through a photograph negative,then within 5
seconds that goes leaving just the blue screen with the white lines.
Repair guy gets it going in workshop leaves it running for several
hours but whenever i get it back it goes again.First time i got it back
it was ok for 4 days the second time i got it back within an hour the
same problem ocurred.
Trying to read original repair warranty is difficult because of
handwriting but there are references to ''blue screen and flybook
line''s.''Trace features to picture tube and tube socket''.
''Dislodge internal foreign material,'' then something that looks like
''heaters to cathode'',''short circuit on blue gun'' ''repair tele
socket on picture circuit board'' ''replace heater dropping resistor &
check plater circuit'' ''very extensive bench test''.

The tv is only 14 months old
I could get someone else to look at it but then i have to start all
over again money-wise and i've already paid $200!
Does anybody have any suggestions?
thanks
p***ed off tv viewer((



  #5   Report Post  
Posted to sci.electronics.repair
 
Posts: n/a
Default AWA tv repaired - 3 times still not working right:(

he can't fix it today supposedly booked out,He's collecting it from me
(again!) early monday morning.So no tv all weekend.Virtually had no tv
for over a week now already.



  #8   Report Post  
Posted to sci.electronics.repair
b
 
Posts: n/a
Default AWA tv repaired - 3 times still not working right:(


Asimov wrote:
"David Nebenzahl" bravely wrote to "All" (27 Jan 06 17:14:09)
--- on the heady topic of " AWA tv repaired - 3 times still not working right"

DN From: David Nebenzahl
DN Xref: core-easynews sci.electronics.repair:356716

DN spake thus:

he can't fix it today supposedly booked out,He's collecting it from me
(again!) early monday morning.So no tv all weekend.Virtually had no tv
for over a week now already.


DN You'll be better off for it. Read a book.


I watched an interview with the Italian movie star Marcello Mastroiani
on TV once where (paraphrasing) he stated TV is garbage, there is
nothing good to watch on TV except maybe the odd documentary about
animals. The man wasn't totally wrong except he didn't get the irony
of being interviewed for TV.
A*s*i*m*o*v


during my time studying media i attended a conference where it was
revealed that with the proliferation of private tv and pay tv channels
in Uk since the Broadcasting act 1990, the greatest increase in
programming (over 100%) was: old nature films. So , that leopard you
saw last week has probably been dead 10 years! But the channels are
raking it in, just buying up old stock and repeating as opposed to
actually investing in new stuff.
Disturbingly, non-news factual programming, such as documentaries or
debates, had dropped by 70% . So much for 'more choice'. TV seems to be
there for the sole aim of making people ignorant and uninformed. Sad
really given the potential for good use of such technology....
-rant mode off!-

-B.

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Brown's gas?? T.Alan Kraus Metalworking 16 December 9th 05 07:36 AM
Central Heating and Hot Water not working properly together [email protected] UK diy 2 October 19th 04 10:31 AM
central heating not working Peter Smithson UK diy 11 September 27th 03 04:11 PM
RCD trips while working on dead circuit Bob Mannix UK diy 4 September 9th 03 09:31 AM
Making a ruin into something habitable. Liz UK diy 140 August 12th 03 12:03 PM


All times are GMT +1. The time now is 12:18 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"