Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Panasonic TV model CT32G11 can't bring up menu screen
We can't seem to display the menu screen with either the front panel
button or the remote. Does this sound like anything common on this set? Thanks for any assistance. Lenny Stein, Barlen Electronics. |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Panasonic TV model CT32G11 can't bring up menu screen
Have schematic? Look for a missing 60Hz ac line clock signal to the
micro/system control or a missing h-sync or v-sync. David |
#3
Posted to sci.electronics.repair
|
|||
|
|||
Panasonic TV model CT32G11 can't bring up menu screen
Nah, control the 5V supply to uP and TXT circuits
|
#4
Posted to sci.electronics.repair
|
|||
|
|||
Panasonic TV model CT32G11 can't bring up menu screen
I would have assumed that Lenny would already have checked the basics,
like clean Vcc to the system control (note there is no separate text circuit in 99% of modern tv sets, all in the micro or jungle ic or combo micro/jungle ic), and looked at the clock and data lines on the eeprom to make sure those are at least clean. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sharp DV-5465 S service menu screen blocked | Electronics Repair | |||
JVC TV and impossible to get rid of menu screen | Electronics Repair | |||
Panasonic TX-32DK1 yellow screen / turns off | Electronics Repair | |||
Blank screen, no menu, but perfect screen when unplugged (Samsung SyncMaster 151D) | Electronics Repair | |||
Panasonic CT27SX12F Setup Menu | Electronics Repair |