I have a strange predicament...

I recently bought a Syntax Olevia 37-inch LCD HDTV (LT37HVS).
When I hook up my Panasonic VCR via composite inputs, the TV cannot
detect the VCR ("no signal detected"). The particularly strange thing
is that if I use the TV's Picture-in-Picture function, the VCR works,
but only in the small PIP frame. When I try to switch it to the bigger
frame, it goes blank and says "no signal detected" again.

I know that the TV's composite inputs work because when I hook up my
DVD player to them it works fine. I also know that the VCR works
because it was fine on my former 32-inch CRT tv.
The VCR only has composite outputs, so I can't try another type of
connection.

I called Syntax tech support and they had no answer other than, "it
sounds like that VCR is incompatible with our tv."

Does anyone have a more specific idea as to what the problem is?

Thanks.

M

wrote in message
oups.com...
I have a strange predicament...

I recently bought a Syntax Olevia 37-inch LCD HDTV (LT37HVS).
When I hook up my Panasonic VCR via composite inputs, the TV cannot
detect the VCR ("no signal detected"). The particularly strange thing
is that if I use the TV's Picture-in-Picture function, the VCR works,
but only in the small PIP frame. When I try to switch it to the bigger
frame, it goes blank and says "no signal detected" again.

I know that the TV's composite inputs work because when I hook up my
DVD player to them it works fine. I also know that the VCR works
because it was fine on my former 32-inch CRT tv.
The VCR only has composite outputs, so I can't try another type of
connection.

I called Syntax tech support and they had no answer other than, "it
sounds like that VCR is incompatible with our tv."

Does anyone have a more specific idea as to what the problem is?

Thanks.

M


Interesting. Could it be that your TV is particularly susceptible to
Macrovision signals on the tapes? Does this happen with your own recordings
or just pre-precorded factory tapes or both? Connect a different VCR and
see if that one works with this TV using the same tape(s) in question.

"Ray L. Volts" wrote in message
news:9MWgf.5507$Dx3.3663@trnddc07...

wrote in message
oups.com...
I have a strange predicament...

I recently bought a Syntax Olevia 37-inch LCD HDTV (LT37HVS).
When I hook up my Panasonic VCR via composite inputs, the TV cannot
detect the VCR ("no signal detected"). The particularly strange thing
is that if I use the TV's Picture-in-Picture function, the VCR works,
but only in the small PIP frame. When I try to switch it to the bigger
frame, it goes blank and says "no signal detected" again.

I know that the TV's composite inputs work because when I hook up my
DVD player to them it works fine. I also know that the VCR works
because it was fine on my former 32-inch CRT tv.
The VCR only has composite outputs, so I can't try another type of
connection.

I called Syntax tech support and they had no answer other than, "it
sounds like that VCR is incompatible with our tv."

Does anyone have a more specific idea as to what the problem is?

Thanks.

M


Interesting. Could it be that your TV is particularly susceptible to
Macrovision signals on the tapes? Does this happen with your own recordings
or just pre-precorded factory tapes or both? Connect a different VCR and
see if that one works with this TV using the same tape(s) in question.


Maybe something in the on screen menu that needs changing.

oldfogie wrote:
"Ray L. Volts" wrote in message
news:9MWgf.5507$Dx3.3663@trnddc07...

wrote in message
oups.com...

I have a strange predicament...

I recently bought a Syntax Olevia 37-inch LCD HDTV (LT37HVS).
When I hook up my Panasonic VCR via composite inputs, the TV cannot
detect the VCR ("no signal detected"). The particularly strange thing
is that if I use the TV's Picture-in-Picture function, the VCR works,
but only in the small PIP frame. When I try to switch it to the bigger
frame, it goes blank and says "no signal detected" again.

I know that the TV's composite inputs work because when I hook up my
DVD player to them it works fine. I also know that the VCR works
because it was fine on my former 32-inch CRT tv.
The VCR only has composite outputs, so I can't try another type of
connection.

I called Syntax tech support and they had no answer other than, "it
sounds like that VCR is incompatible with our tv."

Does anyone have a more specific idea as to what the problem is?

Thanks.

M



Interesting. Could it be that your TV is particularly susceptible to
Macrovision signals on the tapes? Does this happen with your own recordings
or just pre-precorded factory tapes or both? Connect a different VCR and
see if that one works with this TV using the same tape(s) in question.


Maybe something in the on screen menu that needs changing.

Just for the heck of it, try rf out from the vcr and see what happens?

Ken

"Ken Weitzel" wrote in message
newsNbhf.592567$1i.279120@pd7tw2no...


oldfogie wrote:
"Ray L. Volts" wrote in message
news:9MWgf.5507$Dx3.3663@trnddc07...

wrote in message
oups.com...

I have a strange predicament...

I recently bought a Syntax Olevia 37-inch LCD HDTV (LT37HVS).
When I hook up my Panasonic VCR via composite inputs, the TV cannot
detect the VCR ("no signal detected"). The particularly strange thing
is that if I use the TV's Picture-in-Picture function, the VCR works,
but only in the small PIP frame. When I try to switch it to the bigger
frame, it goes blank and says "no signal detected" again.

I know that the TV's composite inputs work because when I hook up my
DVD player to them it works fine. I also know that the VCR works
because it was fine on my former 32-inch CRT tv.
The VCR only has composite outputs, so I can't try another type of
connection.

I called Syntax tech support and they had no answer other than, "it
sounds like that VCR is incompatible with our tv."

Does anyone have a more specific idea as to what the problem is?

Thanks.

M



Interesting. Could it be that your TV is particularly susceptible to
Macrovision signals on the tapes? Does this happen with your own
recordings
or just pre-precorded factory tapes or both? Connect a different VCR and
see if that one works with this TV using the same tape(s) in question.


Maybe something in the on screen menu that needs changing.

Just for the heck of it, try rf out from the vcr and see what happens?

Ken


Yabbut, the OP said, "The VCR only has composite outputs, so I can't try
another type of connection." If it really has no RF out, it sounds more
like a VCP than a VCR. Perhaps the OP meant it doesn't have S-video or
component outs but does have RF out. shrugh

"Ray L. Volts" wrote in message
news:xwghf.3480$Qs2.3183@trnddc03...

"Ken Weitzel" wrote in message
newsNbhf.592567$1i.279120@pd7tw2no...


oldfogie wrote:
"Ray L. Volts" wrote in message
news:9MWgf.5507$Dx3.3663@trnddc07...

wrote in message
oups.com...

I have a strange predicament...

I recently bought a Syntax Olevia 37-inch LCD HDTV (LT37HVS).
When I hook up my Panasonic VCR via composite inputs, the TV cannot
detect the VCR ("no signal detected"). The particularly strange thing
is that if I use the TV's Picture-in-Picture function, the VCR works,
but only in the small PIP frame. When I try to switch it to the bigger
frame, it goes blank and says "no signal detected" again.

I know that the TV's composite inputs work because when I hook up my
DVD player to them it works fine. I also know that the VCR works
because it was fine on my former 32-inch CRT tv.
The VCR only has composite outputs, so I can't try another type of
connection.

I called Syntax tech support and they had no answer other than, "it
sounds like that VCR is incompatible with our tv."

Does anyone have a more specific idea as to what the problem is?

Thanks.

M



Interesting. Could it be that your TV is particularly susceptible to
Macrovision signals on the tapes? Does this happen with your own
recordings
or just pre-precorded factory tapes or both? Connect a different VCR
and
see if that one works with this TV using the same tape(s) in question.


Maybe something in the on screen menu that needs changing.

Just for the heck of it, try rf out from the vcr and see what happens?

Ken


Yabbut, the OP said, "The VCR only has composite outputs, so I can't try
another type of connection." If it really has no RF out, it sounds more
like a VCP than a VCR. Perhaps the OP meant it doesn't have S-video or
component outs but does have RF out. shrugh

Or maybe the OP is considering the RF output "composite". shrugh, Pt. II

Syntax Olevia ????? This sounds like the lowest price thing on the
shelf . Take it back and get someting like Sharp , JVC , Panasonic .

wrote:
I have a strange predicament...

I recently bought a Syntax Olevia 37-inch LCD HDTV (LT37HVS).
When I hook up my Panasonic VCR via composite inputs, the TV cannot
detect the VCR ("no signal detected"). The particularly strange thing
is that if I use the TV's Picture-in-Picture function, the VCR works,
but only in the small PIP frame. When I try to switch it to the bigger
frame, it goes blank and says "no signal detected" again.

I know that the TV's composite inputs work because when I hook up my
DVD player to them it works fine. I also know that the VCR works
because it was fine on my former 32-inch CRT tv.
The VCR only has composite outputs, so I can't try another type of
connection.

I called Syntax tech support and they had no answer other than, "it
sounds like that VCR is incompatible with our tv."

Does anyone have a more specific idea as to what the problem is?

Thanks.

M

I had a similar but not as severe problem with a Samsung DLP set 2
years ago. The Samsung doesn't handle non time-base corrected (VHS)
video well. This showed up as bad color lock in the top 1/3 of the
frame. I also bought (and returned) a Panasonic deck which was no
better than the deck IT replaced. After I bought a JVC S-VHS deck with
a TBC ( trade name 'Digi-Pure') it settled right down. The DVD has no
time base issues since it is essentially based on a TBC (memory
storage).

Glenn Gundlach

a écrit :

wrote:
I have a strange predicament...

I recently bought a Syntax Olevia 37-inch LCD HDTV (LT37HVS).
When I hook up my Panasonic VCR via composite inputs, the TV cannot
detect the VCR ("no signal detected"). The particularly strange thing
is that if I use the TV's Picture-in-Picture function, the VCR works,
but only in the small PIP frame. When I try to switch it to the bigger
frame, it goes blank and says "no signal detected" again.

I know that the TV's composite inputs work because when I hook up my
DVD player to them it works fine. I also know that the VCR works
because it was fine on my former 32-inch CRT tv.
The VCR only has composite outputs, so I can't try another type of
connection.

I called Syntax tech support and they had no answer other than, "it
sounds like that VCR is incompatible with our tv."

Does anyone have a more specific idea as to what the problem is?

Thanks.

I am having exactly the same problem -- but only with some tapes. How
can a VCR be incompatible. Did you get any resolution to the problem?

No resolution yet. Based on a recommendation from Syntax, I exchanged
my Syntax Olevia for a new one, but the new set has the exact same
problem. From everything I've read and various replies I've received,
it seems that the problem is due to the VCR not having "time base
correction". All my other components that are time base corrected (DVD,
video camera) work fine. Apparently, these tvs are very finicky about
this issue. I'm waiting to hear back from Syntax whether or not this
can be fixed. I'll post back when I get a reply.

wrote:
a écrit :

wrote:
I have a strange predicament...

I recently bought a Syntax Olevia 37-inch LCD HDTV (LT37HVS).
When I hook up my Panasonic VCR via composite inputs, the TV cannot
detect the VCR ("no signal detected"). The particularly strange thing
is that if I use the TV's Picture-in-Picture function, the VCR works,
but only in the small PIP frame. When I try to switch it to the bigger
frame, it goes blank and says "no signal detected" again.

I know that the TV's composite inputs work because when I hook up my
DVD player to them it works fine. I also know that the VCR works
because it was fine on my former 32-inch CRT tv.
The VCR only has composite outputs, so I can't try another type of
connection.

I called Syntax tech support and they had no answer other than, "it
sounds like that VCR is incompatible with our tv."

Does anyone have a more specific idea as to what the problem is?

Thanks.

I am having exactly the same problem -- but only with some tapes. How
can a VCR be incompatible. Did you get any resolution to the problem?