Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
I have a 53" Sony Projection TV, Model #KP-53HS20
I know the 3 replacement screens that were sent to me were the... Lenitcular, Fresnal, and Contrast. However, Sony did not have any labeling on the screens or packages. I know how to install them, but do not know the PROPER ORDER or which screen is which. The 3 screens are described as... 1. Clear & Perfectly Transparent 2. Clear & but Cloudy/Hazy look 3. Dark w/ grooves I installed them in this order...front to back... Dark w/ grooves (Closest to you if youre watching the tv) Clear & Perfectly Transparent (the middle screen) Clear & but Cloudy/Hazy (this is the last screen and the closest to the back mirror of the internal backing. Is this order wrong??? Thanks for any help. |
#3
![]() |
|||
|
|||
![]()
Thank you for the reply Andy. I'm having a bit of a shadow problem
that seems to be most apparent when viewing from an angle, so I have a feeling one of the screens may indeed be backwards. Ya think? I've taken apart the TV twice today, and did figure out the right ORDER that you mentioned. Looks like I may be going for dissemble #3, ugggh. Thanks again... |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Replacement plastic drawer slides needed | Woodworking | |||
RCA Rear projection P52921YX2 Part Number needed | Electronics Repair | |||
Replacement DC plug for laptop needed | UK diy | |||
Help Speaker replacement advice needed | UK diy | |||
Dissatisfied with Lee Valley order | Woodworking |