Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
crevitch
 
Posts: n/a
Default

Dave,

Thanks for the great answers. One camera is 6 years old and has seen a
lot of use. The other is about 8 years old and has not been used much.

Can you recommend some instructions and a kit for wet cleaning? Does
the camera need to be taken apart? I am up for the challenge of doing
the cleaning, but would prefer not to take the camera apart.

I have heard that wet cleaning cassettes tend to jam. Is this true?


Thanks



Dave D wrote:


You don't say exactly how much use the camcorders have had, and how old they
are. It could be that the heads are fine, and that the 12 year old tapes are
breaking down and leaving their gunk behind.

However, it could be that the heads are starting to show signs of wear as
well. Heads which require shortening cleaning intervals can sometimes be a
warning that they are wearing out.

I'd certainly suspect that the 12 year old tapes are past it. It's easy to
verify, just buy a new one and see how well it works over a period of time.

A word of warning- head cleaning cassettes are rather bad for your heads,
and will acclerate wear. Furthermore, a cleaning cassette does not do a
proper job of cleaning the heads IMO. You might want to invest in a proper
cleaning kit with chamois cleaning pads and isopropyl alcohol, and read up
on how to wet clean your heads, and indeed the capstan, pinch roller and
tape guides. It's not particularly easy on an 8mm camcorder, but well worth
the results if you feel up to a challenge.

Failing that, ISTR you can buy wet cleaning cassettes, which should do a
better job, but I don't know if they come in 8mm format. As a last resort,
you may have to put the camcorders in for a service.

Dave



You don't say exactly how much use the camcorders have had, and how

old they
are. It could be that the heads are fine, and that the 12 year old

tapes are
breaking down and leaving their gunk behind.

However, it could be that the heads are starting to show signs of

wear as
well. Heads which require shortening cleaning intervals can sometimes

be a
warning that they are wearing out.

I'd certainly suspect that the 12 year old tapes are past it. It's

easy to
verify, just buy a new one and see how well it works over a period of

time.

A word of warning- head cleaning cassettes are rather bad for your

heads,
and will acclerate wear. Furthermore, a cleaning cassette does not do a
proper job of cleaning the heads IMO. You might want to invest in a

proper
cleaning kit with chamois cleaning pads and isopropyl alcohol, and

read up
on how to wet clean your heads, and indeed the capstan, pinch roller and
tape guides. It's not particularly easy on an 8mm camcorder, but well

worth
the results if you feel up to a challenge.

Failing that, ISTR you can buy wet cleaning cassettes, which should do a
better job, but I don't know if they come in 8mm format. As a last

resort,
you may have to put the camcorders in for a service.

Dave

New text

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Camcorder audio problem - 8mm in hi8 camcorder [email protected] Electronics Repair 2 April 23rd 05 03:27 PM
Help - camcorder with mind of its own ?? Samantha Electronics Repair 4 April 20th 05 05:11 AM
Camcorder Seiing Red Zentraleinheit Electronics Repair 7 June 22nd 04 02:55 PM
Fixing Problems on Minolta EP 8015 Copier Copies Plus Electronics Repair 0 June 15th 04 08:29 PM
Tiling Shower Area - adhesive spreading and tile cutting problems JohnB UK diy 7 July 20th 03 10:43 AM


All times are GMT +1. The time now is 04:32 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"