Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Onkyo Stero Cassette Tape Deck
I'm looking for a schmatic and/or repair manual for an Onkyo TA-RW404 tape
deck. The left playback channel has stopped working. Any help would be appreciated. Thanks, D.E. |
#2
|
|||
|
|||
dutch wrote: I'm looking for a schmatic and/or repair manual for an Onkyo TA-RW404 tape deck. The left playback channel has stopped working. Any help would be appreciated. Thanks, D.E. just in case you havent already done so...you may want to check: -audio gone only in play, or in record also? -check headphone sockets and line out - is the sound gone on both these outputs? -vu meter working on that channel? -if none of this helps you'd probably need a scope to trace the path and find out where the signal is getting lost. good luck - B |
#3
|
|||
|
|||
"dutch" wrote in message ... I'm looking for a schmatic and/or repair manual for an Onkyo TA-RW404 tape deck. The left playback channel has stopped working. Any help would be appreciated. Thanks, D.E. Sending the manual to address shown - watch out for those head wires....they're troublemakers. Mark Z. |
#4
|
|||
|
|||
I've always wondered how to pronounce "Onkyo" is it like "on key oh" or
"oink ey oh" must be the first because the second just dosen't make any sense. :-) "Mark D. Zacharias" wrote in message m... "dutch" wrote in message ... I'm looking for a schmatic and/or repair manual for an Onkyo TA-RW404 tape deck. The left playback channel has stopped working. Any help would be appreciated. Thanks, D.E. Sending the manual to address shown - watch out for those head wires....they're troublemakers. Mark Z. |
#5
|
|||
|
|||
I believe it is pronounced "on key oh". Anyway that's how we pronounce it.
Thanks again Mark. D.E. "Michael Kennedy" wrote in message ... I've always wondered how to pronounce "Onkyo" is it like "on key oh" or "oink ey oh" must be the first because the second just dosen't make any sense. :-) "Mark D. Zacharias" wrote in message m... "dutch" wrote in message ... I'm looking for a schmatic and/or repair manual for an Onkyo TA-RW404 tape deck. The left playback channel has stopped working. Any help would be appreciated. Thanks, D.E. Sending the manual to address shown - watch out for those head wires....they're troublemakers. Mark Z. |
#6
|
|||
|
|||
I felt kinda stupid after I started trying to spell it out phonetically. It
seemed obvious that that was how you say it, but I had allready started a post so I figured I'd go ahead and ask.. - Mike "dutch" wrote in message ... I believe it is pronounced "on key oh". Anyway that's how we pronounce it. Thanks again Mark. D.E. "Michael Kennedy" wrote in message ... I've always wondered how to pronounce "Onkyo" is it like "on key oh" or "oink ey oh" must be the first because the second just dosen't make any sense. :-) "Mark D. Zacharias" wrote in message m... "dutch" wrote in message ... I'm looking for a schmatic and/or repair manual for an Onkyo TA-RW404 tape deck. The left playback channel has stopped working. Any help would be appreciated. Thanks, D.E. Sending the manual to address shown - watch out for those head wires....they're troublemakers. Mark Z. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Tape deck has no audio output (Technics RS-TR373) | Electronics Repair | |||
Technics RS-TR373 cassette deck problem | Electronics Repair | |||
How to Adjust the Tape Path Alignment on Newer VCRs | Electronics Repair | |||
TEAC R-888X cassette deck tape detection problem? | Electronics Repair | |||
Fisher cassette heads | Electronics Repair |