Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
HELP W/Emerson VCR Tape Transport (Again)
Ok, It turns out the master cam gear or associated linkages are jamming
on something, or out of time. So...I need to remove the deck to disassemble. Once again- can anyone tell me how to remove the ribbon cables from their terminals on the board and deck? Thanks JR Original post: -- Yeah, I know...POS. Emerson VCR755. Don't want to knock myself out here; the tuner has dropped 50% of the channels but the VCR worked fine. Now, tape loads,FF,RW,Eject all ok; Play: tape transport arms move 90%, retract, and the VCR shuts off. The belt is OK. I can't see the geared idler with the tape in. Pinch roller/capstan contact, but capstan doesn't run. Don't know if it's supposed to before tape transport completes. The motor runs back and forth during play initiation, and the tape does not de-spool, but ends up tensioned normally. Seems to be a logic error; should I shoot for two at the nearest dumpster? -------------------------------------------------------------- Home Page: http://www.seanet.com/~jasonrnorth |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Help w/Emerson VCR Tape Transport | Electronics Repair | |||
JVC VCR won't load tapes | Electronics Repair | |||
How to Adjust the Tape Path Alignment on Newer VCRs | Electronics Repair | |||
How to fix tape eating VCR | Electronics Repair | |||
Fisher cassette heads | Electronics Repair |