 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#3
|
|||
|
|||
"Thaqalain" wrote in message oups.com... Philips 107X43: FCC ID: A3KM112 My monitor is shorted with a light while tilting board by placing paper and metallic hair pin to adust EW Correction (a metal stud/upstand) to get full view of picture otherwise it's left/right edges was bowed. I checked fuse still working in another monitor,I inserted 2 other fuse,but unable to get any picture. Monitor shows green power LED and a humming sound while opening monitors. I want to know what went wrong during blow -off when I have pushed a hair pin inside to lift board.What parts I have to look to rectify monitor. It is very difficult to decipher your poor English but the most evident point is -- You do not know enough to be poking in a box that will kill you when you do not know what you are doing. -- John G Wot's Your Real Problem? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Clearing hair from drain/pump | Home Repair | |||
| Clearing hair from pipes | Home Repair | |||
Threaded Mode
