Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Max
 
Posts: n/a
Default MAGNETRON 2M172AJ versus 2M167B

Hi , are they compatible ?

The original is the 2M167B and I want to replace it with 2M172AJ.



  #2   Report Post  
Kim Sleep
 
Posts: n/a
Default

In a word....NO.
"Max" wrote in message ...
Hi , are they compatible ?

The original is the 2M167B and I want to replace it with 2M172AJ.





  #3   Report Post  
Max
 
Posts: n/a
Default

Hi , why not ?

The spec looks the same .

The only thing is the mounting screw but I chan arrange something.


"Kim Sleep" wrote in message
. ..
In a word....NO.
"Max" wrote in message ...
Hi , are they compatible ?

The original is the 2M167B and I want to replace it with 2M172AJ.







  #4   Report Post  
Sam Goldwasser
 
Posts: n/a
Default

"Kim Sleep" writes:

"Max" wrote in message ...
Hi , are they compatible ?

The original is the 2M167B and I want to replace it with 2M172AJ.


In a word....NO.


They cross to the same part number. However, the mounting may be different.
Electrically, it looks like they are equivalent based on:

http://a-1appliance.com/xref/magxref.html

--- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/
Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/
+Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm
| Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html

Note: These links are hopefully temporary until we can sort out the excessive
traffic on Repairfaq.org.

Important: Anything sent to the email address in the message header above is
ignored unless my full name is included in the subject line. Or, you can
contact me via the Feedback Form in the FAQs.

  #5   Report Post  
Max
 
Posts: n/a
Default

Thank...


"Sam Goldwasser" wrote in message
...
"Kim Sleep" writes:

"Max" wrote in message ...
Hi , are they compatible ?

The original is the 2M167B and I want to replace it with 2M172AJ.


In a word....NO.


They cross to the same part number. However, the mounting may be

different.
Electrically, it looks like they are equivalent based on:

http://a-1appliance.com/xref/magxref.html

--- sam | Sci.Electronics.Repair FAQ Mirror:

http://repairfaq.ece.drexel.edu/
Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/
+Lasers | Sam's Laser FAQ:

http://repairfaq.ece.drexel.edu/sam/lasersam.htm
| Mirror Sites:

http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html

Note: These links are hopefully temporary until we can sort out the

excessive
traffic on Repairfaq.org.

Important: Anything sent to the email address in the message header above

is
ignored unless my full name is included in the subject line. Or, you can
contact me via the Feedback Form in the FAQs.





  #6   Report Post  
Franc Zabkar
 
Posts: n/a
Default

On Thu, 5 May 2005 12:45:42 -0400, "Max" put finger
to keyboard and composed:

Hi , are they compatible ?

The original is the 2M167B and I want to replace it with 2M172AJ.


Compare the AM702 with the AM703 in this catalogue:

http://www.wagner.net.au/Catalogue/10_03.pdf
http://www.wagner.net.au/Catalogue/10_04.pdf

Identical electrical and dimensional specs, but slightly different
mounting arrangement.


- Franc Zabkar
--
Please remove one 's' from my address when replying by email.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
GE magnetron removal from microwave Chris Home Repair 21 December 1st 04 11:42 AM
Heat pump versus oil versus propane in southern NH Gerome Home Ownership 3 October 7th 03 05:26 PM
Tile versus carpet? No-Name Home Repair 1 July 9th 03 03:45 AM


All times are GMT +1. The time now is 06:19 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"