Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
MAGNETRON 2M172AJ versus 2M167B
Hi , are they compatible ?
The original is the 2M167B and I want to replace it with 2M172AJ. |
#2
|
|||
|
|||
In a word....NO.
"Max" wrote in message ... Hi , are they compatible ? The original is the 2M167B and I want to replace it with 2M172AJ. |
#3
|
|||
|
|||
Hi , why not ?
The spec looks the same . The only thing is the mounting screw but I chan arrange something. "Kim Sleep" wrote in message . .. In a word....NO. "Max" wrote in message ... Hi , are they compatible ? The original is the 2M167B and I want to replace it with 2M172AJ. |
#4
|
|||
|
|||
"Kim Sleep" writes:
"Max" wrote in message ... Hi , are they compatible ? The original is the 2M167B and I want to replace it with 2M172AJ. In a word....NO. They cross to the same part number. However, the mounting may be different. Electrically, it looks like they are equivalent based on: http://a-1appliance.com/xref/magxref.html --- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/ Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/ +Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm | Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html Note: These links are hopefully temporary until we can sort out the excessive traffic on Repairfaq.org. Important: Anything sent to the email address in the message header above is ignored unless my full name is included in the subject line. Or, you can contact me via the Feedback Form in the FAQs. |
#5
|
|||
|
|||
Thank...
"Sam Goldwasser" wrote in message ... "Kim Sleep" writes: "Max" wrote in message ... Hi , are they compatible ? The original is the 2M167B and I want to replace it with 2M172AJ. In a word....NO. They cross to the same part number. However, the mounting may be different. Electrically, it looks like they are equivalent based on: http://a-1appliance.com/xref/magxref.html --- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/ Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/ +Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm | Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html Note: These links are hopefully temporary until we can sort out the excessive traffic on Repairfaq.org. Important: Anything sent to the email address in the message header above is ignored unless my full name is included in the subject line. Or, you can contact me via the Feedback Form in the FAQs. |
#6
|
|||
|
|||
On Thu, 5 May 2005 12:45:42 -0400, "Max" put finger
to keyboard and composed: Hi , are they compatible ? The original is the 2M167B and I want to replace it with 2M172AJ. Compare the AM702 with the AM703 in this catalogue: http://www.wagner.net.au/Catalogue/10_03.pdf http://www.wagner.net.au/Catalogue/10_04.pdf Identical electrical and dimensional specs, but slightly different mounting arrangement. - Franc Zabkar -- Please remove one 's' from my address when replying by email. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
GE magnetron removal from microwave | Home Repair | |||
Heat pump versus oil versus propane in southern NH | Home Ownership | |||
Tile versus carpet? | Home Repair |