Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
NEC Accusync Monitor 120 21" Loss of Red
Loss of red with dominant green tint; some red for about 3" on the left of
the screen; red fades moving to the right. When problem began the color balance was normal for up to 15 minutes from startup before the red faded. Now, no red on startup. All menu color adjustments fail to correct. Can anyone suggest the diagnosis and fix ? |
#2
|
|||
|
|||
The performance of the colour amp stages should be properly checked. This is
done by using a scope to see if the signal levels are correct, and also using a volt meter check the supply voltages, and bias voltages to the CRT. Generally speaking, according to your description, a common cause of this type of failure is usually the CRT. -- JANA _____ "monrep9" wrote in message lkaboutelectronicequipment.com... Loss of red with dominant green tint; some red for about 3" on the left of the screen; red fades moving to the right. When problem began the color balance was normal for up to 15 minutes from startup before the red faded. Now, no red on startup. All menu color adjustments fail to correct. Can anyone suggest the diagnosis and fix ? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Pressure loss on Combi heating system | UK diy | |||
Pressure loss on combi system | Home Repair | |||
Low Loss RG6, and other tv antenna questions ?? | Home Repair | |||
Low Loss RG6, and other tv antenna questions ?? | Home Ownership | |||
Question about cooling loss due to hot attic | Home Repair |