Home |
Search |
Today's Posts |
|
Electronic Schematics (alt.binaries.schematics.electronic) A place to show and share your electronics schematic drawings. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.binaries.schematics.electronic
|
|||
|
|||
Good old 7407
I was updating a design that used the Allegro UDN2595 non-inverting power
driver. Allegero has discontinued most of their old power drivers and only has a few that are not serial inputs. Toshiba has a similar part TD62384 but it is a real pain to obtain. I was having a real problem trying to find power drivers that would work with a 24V bus. It occurred to me that the old TTL series 7406 and 7407 are rated for 30V open drain and will sink 40ma. This will definitely work in the application and they are still showing as active (Texas Instruments). If anybody has suggestions on other power drivers - Source or Sink for 24V and 100 to 300ma please let me know. The ULN2803 was discontinued by Allegro but is still being sourced by Toahiba snd TI in dip and soic packages. A6801 is new from Allegro - Octal latched sink driver with cmos inputs and darlington outputs. Interesting part. For most of my new designs- I plan to use the Freescale MC33879 low/high side switch. Has a SPI input and octal output switches that can be wired to source or sink from a 5.5 to 26.5V bus. Current limited, protected and load fault detection-Can detect open load or fault. With a bit of trickery, can also be used as an input port. Two of the channels have PWM inputs. For general purpose I/O - found a nice port expander from Microchip MCP23S17 16bit port expander which can have any bits input or output and has built-in interrupt on change or condition. Available in SPI or I^2C. Thanks for any input Oppie |
Thread Tools | Search this Thread |
Display Modes | |
|
|