Home |
Search |
Today's Posts |
|
Electronic Schematics (alt.binaries.schematics.electronic) A place to show and share your electronics schematic drawings. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.binaries.schematics.electronic
|
|||
|
|||
mechanical woesfor plcc/dip adapter, a solution, help with clock waveform
i tried to install my plcc adapter only to discover that the
height clearence would not allow barely enough for dip package height (height images follow) so.... i used the original planned solution , that is 30 awg kynar wires soldered direct to plcc pins, plcc sits aon small squareof perf spacer to raise pins off PCB and then run loose wires through dip holes and solder . (solution images follow) iwas looking at the VFD driver clock signal (waveform) and wonder if someone couldlook at image tell me if it needs to be investigted and repaired ??? (wave image follows) thanks for any useful help, robb |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
constructive critic on my plcc adapter PCB | Electronic Schematics | |||
mechanical alarm clock without luminous numbers/hands? | UK diy | |||
Sell:Brass Male Adapter,Swivel Female Adapter,Flare Adapter,Tee,Connector,Barbed Tee,Elbow, | Home Repair | |||
How to solder PLCC socket with surface mount contacts? | Electronics Repair | |||
How to remove PLCC chips from computer? | Electronics Repair |