Home |
Search |
Today's Posts |
#1
Posted to misc.consumers.house
|
|||
|
|||
fluorescent lights wiring
I"m trying to wire two dual 40w fluorescent light fixture in parallel
in a signal circuit and without success. Each fixture has two 40w tubes and an electrical ballast. If I wire each one separatly then it'll work. I gather the reason might be interference between the two ballasts but I want to hear some expert opinon. |
#2
Posted to misc.consumers.house
|
|||
|
|||
fluorescent lights wiring
On 16 Oct 2006 21:43:04 -0700, edgekaos wrote:
I"m trying to wire two dual 40w fluorescent light fixture in parallel in a signal circuit and without success. Each fixture has two 40w tubes and an electrical ballast. If I wire each one separatly then it'll work. I gather the reason might be interference between the two ballasts but I want to hear some expert opinon. Odd. What do you mean "without success" ? So each ballast has a black wire and a white wire, and you hook the two blacks together with the black supply, and the two whites together with the white supply and one or both fixtures does not light? Or they flicker? Did you make certain to wire the ground securely? Are both fixtures the same brand and style of ballast? If not, you might risk reversing the leads from one of them, but really it should not matter. sdb -- Wanted: Omnibook 800 & accessories, cheap, working or not sdbuse1 on mailhost bigfoot.com |
#3
Posted to misc.consumers.house
|
|||
|
|||
fluorescent lights wiring
|
#4
Posted to misc.consumers.house
|
|||
|
|||
fluorescent lights wiring
edgekaos wrote: I"m trying to wire two dual 40w fluorescent light fixture in parallel in a signal circuit and without success. Each fixture has two 40w tubes and an electrical ballast. If I wire each one separatly then it'll work. I gather the reason might be interference between the two ballasts but I want to hear some expert opinon. Shouldn't be any interference... After all, technically all the fluorescent lamps in your house are in parallel. Heck, all the fluorescent lamps in your part of town are technically in parallel across the local transformer. |
#5
Posted to misc.consumers.house
|
|||
|
|||
fluorescent lights wiring
SDB brings u p an interesting point. I was repairing a fixture in a hallway
with two identical circline fluorescent fixtures wired in parallel. Couldn't get it to work. I reversed the black and white wire and it works fine. Anyone know why? mm "sylvan butler" wrote in message rnal... On 16 Oct 2006 21:43:04 -0700, edgekaos wrote: I"m trying to wire two dual 40w fluorescent light fixture in parallel in a signal circuit and without success. Each fixture has two 40w tubes and an electrical ballast. If I wire each one separatly then it'll work. I gather the reason might be interference between the two ballasts but I want to hear some expert opinon. Odd. What do you mean "without success" ? So each ballast has a black wire and a white wire, and you hook the two blacks together with the black supply, and the two whites together with the white supply and one or both fixtures does not light? Or they flicker? Did you make certain to wire the ground securely? Are both fixtures the same brand and style of ballast? If not, you might risk reversing the leads from one of them, but really it should not matter. sdb -- Wanted: Omnibook 800 & accessories, cheap, working or not sdbuse1 on mailhost bigfoot.com |
#6
Posted to misc.consumers.house
|
|||
|
|||
fluorescent lights wiring
Fluorescent lighting circuits, especially if equipped with the older
magnetic ballasts, are designed such that there isn't much room for wiring errors, dirty lamps, low line voltage, poor connections or low temperatures. What happens is that the ballasts can't supply enough voltage to start the lamps under less than design conditions. What isn't usually understood is that the metal of the lighting fixture is part of the starting circuit. On such systems (known as rapid start circuits), the lamp must be within a half inch or so of a piece of grounded metal of certain minimum dimensions. It's called a "ground plane". Usually, the metal of the lighting fixture handles the requirement; but if the fixture isn't grounded or if the black and white wires feeding the ballast are reversed somewhere in the circuit, the starting system doesn't work as intended, the gas inside the lamp doesn't ionize and so the lamp stays dark. You can sometimes test to see if this is the problem simply by touching the lamp. If it starts, the lamp is either dirty or there is a problem with the starting circuit. TKM "Michael Muderick" wrote in message news:k8D5h.1213$ZN1.362@trndny03... SDB brings u p an interesting point. I was repairing a fixture in a hallway with two identical circline fluorescent fixtures wired in parallel. Couldn't get it to work. I reversed the black and white wire and it works fine. Anyone know why? mm "sylvan butler" wrote in message rnal... On 16 Oct 2006 21:43:04 -0700, edgekaos wrote: I"m trying to wire two dual 40w fluorescent light fixture in parallel in a signal circuit and without success. Each fixture has two 40w tubes and an electrical ballast. If I wire each one separatly then it'll work. I gather the reason might be interference between the two ballasts but I want to hear some expert opinon. Odd. What do you mean "without success" ? So each ballast has a black wire and a white wire, and you hook the two blacks together with the black supply, and the two whites together with the white supply and one or both fixtures does not light? Or they flicker? Did you make certain to wire the ground securely? Are both fixtures the same brand and style of ballast? If not, you might risk reversing the leads from one of them, but really it should not matter. sdb -- Wanted: Omnibook 800 & accessories, cheap, working or not sdbuse1 on mailhost bigfoot.com |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wiring and plumbing a second kitchen | Home Repair | |||
Wiring new recessed lights in Vaulted ceiling | Home Repair | |||
Good verses bad compact fluorescent lights -- inside? | Electronics Repair | |||
Wiring bedroom lights | UK diy | |||
Best method for wiring up recessed lights | UK diy |