Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Screwdriver bit holder for Stanley Yankee
Does the group have any experience of screwdriver bit holder that can be
used in a Stanley Yankee 131B spiral screwdriver. A friend had made one for his 130 out of a standard magnetic holder but the 131 requires a thicker shaft than the standard 1/4 inch bit holder has. Thanks in advance. |
#2
|
|||
|
|||
Highland Hardware sells them and I think Lee Valley and Mc Feeley's sell
them. "am" wrote in message ... Does the group have any experience of screwdriver bit holder that can be used in a Stanley Yankee 131B spiral screwdriver. A friend had made one for his 130 out of a standard magnetic holder but the 131 requires a thicker shaft than the standard 1/4 inch bit holder has. Thanks in advance. |
#3
|
|||
|
|||
On Sat, 26 Feb 2005 10:10:40 GMT, the inscrutable "am"
spake: Does the group have any experience of screwdriver bit holder that can be used in a Stanley Yankee 131B spiral screwdriver. A friend had made one for his 130 out of a standard magnetic holder but the 131 requires a thicker shaft than the standard 1/4 inch bit holder has. Thanks in advance. 3 tips: Do you have a welder? Weld a 1/4" 6-point socket or magnetic hex drive shank onto an existing bit that has been filed or ground down. Or grind a 1/4" square end on a Yankee bit. That would allow you to use any size socket as a nut driver. Or spend $18 he http://pages.tias.com/8600/InventoryPage/1536862/1.html --- - Sarcasm is just one more service we offer. - http://diversify.com Web Applications |
#4
|
|||
|
|||
Garrett Wade handles them.
http://garrettwade.com/jump.jsp?lGen...oductID=103531 On Sat, 26 Feb 2005 10:10:40 GMT, "am" wrote: Does the group have any experience of screwdriver bit holder that can be used in a Stanley Yankee 131B spiral screwdriver. A friend had made one for his 130 out of a standard magnetic holder but the 131 requires a thicker shaft than the standard 1/4 inch bit holder has. Thanks in advance. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Boring out hardened MT2 EM holder? | Metalworking | |||
Bosch cordless screwdriver problem | UK diy | |||
Made map holder today from LEXAN! What a material! | Metalworking | |||
For Trade - Shaper Keyway/Slotter Tool Holder | Metalworking |