| Page 1 of 2 | 1 | 2 |
|
|
What is it? XLV
|
248. Ironing board pad/cover hold down
249. 2/3 wire stripper 250. Nail set 251. Drywall anchor 252. Guy wire cable clamp 253. Piping installation tool -Brian "R.H." wrote in message ... Just posted another set of photos this morning: http://puzzlephotos.blogspot.com/ Rob |
"R.H." wrote in message ... Just posted another set of photos this morning: http://puzzlephotos.blogspot.com/ Rob 251 drywakk screw/hanger 242 disc brake piston tool |
R.H. wrote:
Just posted another set of photos this morning: http://puzzlephotos.blogspot.com/ 248 looks like its designed to hold something heavy 251 is a screw, probobly designed to have a lot of grip/holding power. 252 looks like some kind of clamp |
253 is a tool for installing the locking bead into car window rubber
moulding. (Got one) "R.H." wrote in message ... Just posted another set of photos this morning: http://puzzlephotos.blogspot.com/ Rob |
Just posted another set of photos this morning: 249 fly fisherman's tool |
"R.H." wrote in message ... Just posted another set of photos this morning: http://puzzlephotos.blogspot.com/ Rob 248. Filament 249. US American made. ;~) 250. Corn on the cob dish. 251. Self drilling Dry wall insert. 252. Ground rod clamp 253. Carpet tool |
dammit, I thought I'd get that one first.
tis true, I own one Tom Gardner wrote: 253 is a tool for installing the locking bead into car window rubber moulding. (Got one) "R.H." wrote in message ... Just posted another set of photos this morning: http://puzzlephotos.blogspot.com/ Rob |
"R.H." writes:
Just posted another set of photos this morning: http://puzzlephotos.blogspot.com/ Rob 248: Some kind of heating element (perhaps hairdryer?) 251: Screw-in drywall anchor. scott |
Looks like wierd kinky stuff for sex fantasies! Ouch!!!!!!!
R.H. wrote: Just posted another set of photos this morning: http://puzzlephotos.blogspot.com/ Rob |
"Cherokee-Ltd" wrote in message ... 248. Ironing board pad/cover hold down Nope, I forgot to mention that this photo is a close-up, approximately six times larger than actual size. 249. 2/3 wire stripper Not a wire stripper. 250. Nail set It could be used as one, but according to the seller it's something else. 251. Drywall anchor It's used with drywall, but it's not an anchor. 252. Guy wire cable clamp Nope 253. Piping installation tool I don't know what this one is, I'm still trying to verify it on the web. http://puzzlephotos.blogspot.com/ |
251. Drywall anchor
It's used with drywall, but it's not an anchor. I take that back, I looks like it is an anchor so this answer is correct. I thought an anchor was something that a screw was screwed into, but I guess it applies to a wider variety of items. |
"Waynemak" wrote in message ... "R.H." wrote in message ... Just posted another set of photos this morning: http://puzzlephotos.blogspot.com/ Rob 251 drywakk screw/hanger Yes, instructions on how to use it can be seen he http://www.itwbrands.com/prod_ezanchor_hanger.php 242 disc brake piston tool Correct |
"Jonathan Wilson" wrote in message ... R.H. wrote: Just posted another set of photos this morning: http://puzzlephotos.blogspot.com/ 248 looks like its designed to hold something heavy As I stated in a previous post, I should have mentioned this one is a close-up, six time larger than actual size. 251 is a screw, probobly designed to have a lot of grip/holding power. Yes, for drywall 252 looks like some kind of clamp Correct, though not very specific... |
"Matthew Newell" wrote in message T... In article , says... Just posted another set of photos this morning: http://puzzlephotos.blogspot.com/ 248 - camp bed springs This one is a little misleading, as stated previously, I neglected to mention the photo is six times actual size. 249 - end looks like nail clippers - but dont understand other bits It does look like nail clippers, but that's not what it's for. 250 a centre punch with a very heavy grip Correct. 251 - a plastre board screw - screw this into plaster board and use normal screw in hole through core (not shown)of this thing Yes, except there is no second screw, the end that you can't see is screwed with a phillips head driver. 252 some form of adjustable vice jaws Correct. 253 for separating two (hot) wires ? - or cutting through (and providing nice even rounded sides) a substance that melts easily, it looks as if it has been heated regularly Still not sure about this one... |
"Little" wrote in message ups.com... Just posted another set of photos this morning: 249 fly fisherman's tool Correct, it's a multi-tool with four different uses. |
"Gary Brady" wrote in message k.net... R.H. wrote: Just posted another set of photos this morning: http://puzzlephotos.blogspot.com/ Rob 251. Drywall anchor Correct. -- Gary Brady Austin, TX www.powdercoatoven.4t.com |
"Tom Gardner" wrote in message . com... 253 is a tool for installing the locking bead into car window rubber moulding. (Got one) Does it look just like mine? I can't find one like it on the web to verify your answer. Any idea where I could see one? |
"Leon" wrote in message om... "R.H." wrote in message ... Just posted another set of photos this morning: http://puzzlephotos.blogspot.com/ Rob 248. Filament Correct, good job on that one. 249. US American made. ;~) 250. Corn on the cob dish. Too small for that, sometimes I have a hard time telling if someone is joking or if they didn't read the dimensions. Also it's not concave. 251. Self drilling Dry wall insert. Yes. 252. Ground rod clamp Nope 253. Carpet tool Not yet sure about this one. |
"Scott Lurndal" wrote in message m... "R.H." writes: Just posted another set of photos this morning: http://puzzlephotos.blogspot.com/ Rob 248: Some kind of heating element (perhaps hairdryer?) Nope, but it does get hot. 251: Screw-in drywall anchor. Correct. scott |
"yourname" wrote in message ... dammit, I thought I'd get that one first. tis true, I own one As I asked the previous poster, any idea where I could see one like it on the web? |
"R.H." writes:
251. Drywall anchor It's used with drywall, but it's not an anchor. I take that back, I looks like it is an anchor so this answer is correct. I thought an anchor was something that a screw was screwed into, but I guess it applies to a wider variety of items. Actually, you screw a screw into the #251, it's not much use otherwise. scott |
In article ,
"R.H." wrote: Just posted another set of photos this morning: http://puzzlephotos.blogspot.com/ Rob 248. My dad's suspenders. How did YOU get them? 249. Abu Ghraib pocket interrogation kit. 250. "Ribbed for her pleasure" nail. For the woodier trees. 251. Piece from "Barbie's Foundation Drill" playset. 252. Album Cover from Yanni's brief foray into industrial music. 253. Tool for installing stripes into zebras. -- B.B. --I am not a goat! thegoat4 at airmail dot net http://web2.airmail.net/thegoat4/ |
In article ,
"R.H." wrote: "yourname" wrote in message ... dammit, I thought I'd get that one first. tis true, I own one As I asked the previous poster, any idea where I could see one like it on the web? http://puzzlephotos.blogspot.com/ Scroll down to #253. (: I actually hunted around for a while because I have seen such a tool out on the internet, but I couldn't find it this time around. However, I did find this gem during my search: http://denali.frontier.iarc.uaf.edu:...get.phtml?mess age_id=59285&submit_thread=1#message Or: http://tinyurl.com/5p4h6 for short. -- B.B. --I am not a goat! thegoat4 at airmail dot net http://web2.airmail.net/thegoat4/ |
Figured I'd give this a try;
248) Hand exerciser 249) No clue, but it looks painful :) 250) No idea, is the top right end open? 251) Drywall anchor 252) Hold down dogs of some sort? 253) Again no idea, but it too looks painful. Hmmm, only able to guess at 3 out of 6, oh well. Regards, Jim C Roberts |
The pictures aren't all that good but try page 41 of this:
http://www.autobodysupplies.com/SECT...%20Catalog.pdf Best Regards, Keith Marshall "I'm not grown up enough to be so old!" "R.H." wrote in message ... "yourname" wrote in message ... dammit, I thought I'd get that one first. tis true, I own one As I asked the previous poster, any idea where I could see one like it on the web? |
Just posted another set of photos this morning:
http://puzzlephotos.blogspot.com/ Rob 252. Pipe clamp jaws for a vise. Scotty |
In article ,
R.H. wrote: "Matthew Newell" wrote in message ET... [ ... ] 251 - a plastre board screw - screw this into plaster board and use normal screw in hole through core (not shown)of this thing Yes, except there is no second screw, the end that you can't see is screwed with a phillips head driver. But there *should* be. The Phillips driver screws this into the wall, and then a long metal screw is put into the center of the first, and it shifts the point, turning it sideway, and clamps down on the back of the drywall with it. They come in a clear plastic box with several of these, and an equal number of the screws to put into them once they are seated in the drywall. 252 some form of adjustable vice jaws Correct. In particular, they look like jaws to fit inside the normal vise jaws, to grip pipe or other round stock. 253 for separating two (hot) wires ? - or cutting through (and providing nice even rounded sides) a substance that melts easily, it looks as if it has been heated regularly Still not sure about this one... No bets on that one. Enjoy, DoN. -- Email: | Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
In article , dnichols@d-
and-d.com says... In article , R.H. wrote: "Matthew Newell" wrote in message ET... [ ... ] 251 - a plastre board screw - screw this into plaster board and use normal screw in hole through core (not shown)of this thing Yes, except there is no second screw, the end that you can't see is screwed with a phillips head driver. But there *should* be. The Phillips driver screws this into the wall, and then a long metal screw is put into the center of the first, and it shifts the point, turning it sideway, and clamps down on the back of the drywall with it. They come in a clear plastic box with several of these, and an equal number of the screws to put into them once they are seated in the drywall. snipped Don is completely correct - my entire office is partitioned with (what we call in UK) plaster board. The board is not strong enough to hold pictures or maps using a normal screw or tack. this thing you have is pushed into the plaster board - then its external thread is used to pull it all the way into the soft wall till its head is flush, then the smaller fine metal screw is used to attach 'whatever' to the wall via the plastic screw. I have a tv screen held to wall with them - so I sure hope they work! Regards Matthew Newell |
WOW! These pics are FANTASTIC!
Hattie |
"R.H." wrote:
Just posted another set of photos this morning: Did you ever come up w/ a solution for the weight on the last set (246, I think??)? My dial up is so slow loading the images takes so long I don't want to take the time... :) |
In article ,
R.H. wrote: 251 drywakk screw/hanger Yes, instructions on how to use it can be seen he http://www.itwbrands.com/prod_ezanchor_hanger.php Aha! I have a mirror which has a back likely intended to take something like this, but I'd never seen the actual device before. Basically the mirror (which is quite heavy) has a wooden back with a round hole partially covered at the top by a metal strap, making a D-shaped opening to a round hole. It's hanging now by an L-shaped-hook, but if the hook were to rotate.... |
Hi,
#248 looks like the filament of a light bulb of some sort. Thanks for the fun Roger ********************************** |
In article ,
Matthew Newell wrote: In article , dnichols@d- and-d.com says... In article , R.H. wrote: "Matthew Newell" wrote in message ET... [ ... ] 251 - a plastre board screw - screw this into plaster board and use normal screw in hole through core (not shown)of this thing [ ... ] But there *should* be. The Phillips driver screws this into the wall, and then a long metal screw is put into the center of the first, and it shifts the point, turning it sideway, and clamps down on the back of the drywall with it. They come in a clear plastic box with several of these, and an equal number of the screws to put into them once they are seated in the drywall. snipped Don is completely correct - my entire office is partitioned with (what we call in UK) plaster board. There are various names for it here in the USA. The most common (at least in the Washington DC vicinity) is "drywall", though I first learned "sheetrock" down in South Texas. (It may have been a brand name -- I was just a kid at the time.) The board is not strong enough to hold pictures or maps using a normal screw or tack. this thing you have is pushed into the plaster board - then its external thread is used to pull it all the way into the soft wall till its head is flush, then the smaller fine metal screw is used to attach 'whatever' to the wall via the plastic screw. I have a tv screen held to wall with them - so I sure hope they work! Ouch! A standard CRT, or one of the flat-panel LCD ones? If the former, it will be cantilevering a pull on the upper ones. These things are stronger in sheer than in tension. If it is a true CRT, I would suggest that the support be of the form: Use a fixed-pitch font to avoid distortion of the image. Courier should work well. Wall || || || | ----- metal plate || |x || | +----------------------+ || |x| | || | | T V | || |x| set | || | | | || | | | || | | | || | | | || | | | || | +----------------------+ || |========================== --- metal support || |x___________________/ || |/ ^ || | +-------- Welded metal bracket Wherever you see an 'x' on the drawing above, you want a line of the screws -- spaced something like 8" (200mm) apart. Much closer, and you will weaken the drywall. Much farther apart, and you won't have enough strength. Where there are rows closer than that distance apart, stagger the screws like this: +------------------------+ | x x | | | | x x | | | | x x | | | | | | | | | |========================| | x |_| x |_| x | +------------------------+ The bottom row of screws offers the least support -- but it still can help in shear. Good Luck, DoN. -- Email: | Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
"Roger Haar" wrote in message ... Hi, #248 looks like the filament of a light bulb of some sort. Correct, it's an old 750 watt GE projection bulb. Not sure if it still works, the glass is just a little loose in the base so I'm not sure if I want to give it a try. |
"Duane Bozarth" wrote in message ... "R.H." wrote: Just posted another set of photos this morning: Did you ever come up w/ a solution for the weight on the last set (246, I think??)? My dial up is so slow loading the images takes so long I don't want to take the time... :) The weight that unscrewed into two pieces was #244, I haven't been able to confirm what it was used with, I'm guessing some type of scale. |
But there *should* be. The Phillips driver screws this into the
wall, and then a long metal screw is put into the center of the first, and it shifts the point, turning it sideway, and clamps down on the back of the drywall with it. They come in a clear plastic box with several of these, and an equal number of the screws to put into them once they are seated in the drywall. The one in my photo is different than the type you have in mind, there is no second screw for this one. If you haven't already seen the link that I posted previously, have a look at this site for instructions for this one: http://www.itwbrands.com/prod_ezanchor_hanger.php snipped Don is completely correct - my entire office is partitioned with (what we call in UK) plaster board. There are various names for it here in the USA. The most common (at least in the Washington DC vicinity) is "drywall", though I first learned "sheetrock" down in South Texas. (It may have been a brand name -- I was just a kid at the time.) The board is not strong enough to hold pictures or maps using a normal screw or tack. this thing you have is pushed into the plaster board - then its external thread is used to pull it all the way into the soft wall till its head is flush, then the smaller fine metal screw is used to attach 'whatever' to the wall via the plastic screw. I have a tv screen held to wall with them - so I sure hope they work! Ouch! A standard CRT, or one of the flat-panel LCD ones? If the former, it will be cantilevering a pull on the upper ones. These things are stronger in sheer than in tension. If it is a true CRT, I would suggest that the support be of the form: Use a fixed-pitch font to avoid distortion of the image. Courier should work well. Wall || || || | ----- metal plate || |x || | +----------------------+ || |x| | || | | T V | || |x| set | || | | | || | | | || | | | || | | | || | | | || | +----------------------+ || |========================== --- metal support || |x___________________/ || |/ ^ || | +-------- Welded metal bracket Wherever you see an 'x' on the drawing above, you want a line of the screws -- spaced something like 8" (200mm) apart. Much closer, and you will weaken the drywall. Much farther apart, and you won't have enough strength. Where there are rows closer than that distance apart, stagger the screws like this: +------------------------+ | x x | | | | x x | | | | x x | | | | | | | | | |========================| | x |_| x |_| x | +------------------------+ The bottom row of screws offers the least support -- but it still can help in shear. Good Luck, DoN. Looks like a good plan... |
"DoN. Nichols" wrote in message ... In article , R.H. wrote: "Matthew Newell" wrote in message ET... [ ... ] 251 - a plastre board screw - screw this into plaster board and use normal screw in hole through core (not shown)of this thing Yes, except there is no second screw, the end that you can't see is screwed with a phillips head driver. But there *should* be. The Phillips driver screws this into the wall, and then a long metal screw is put into the center of the first, and it shifts the point, turning it sideway, and clamps down on the back of the drywall with it. They come in a clear plastic box with several of these, and an equal number of the screws to put into them once they are seated in the drywall. 252 some form of adjustable vice jaws Correct. In particular, they look like jaws to fit inside the normal vise jaws, to grip pipe or other round stock. Yes, they're for pipe. |
"Scott Lurndal" wrote in message om... "R.H." writes: 251. Drywall anchor It's used with drywall, but it's not an anchor. I take that back, I looks like it is an anchor so this answer is correct. I thought an anchor was something that a screw was screwed into, but I guess it applies to a wider variety of items. Actually, you screw a screw into the #251, it's not much use otherwise. If you haven't already seen the link that explains this one, here it is again: http://www.itwbrands.com/prod_ezanchor_hanger.php |
| All times are GMT +1. The time now is 12:59 AM. |
|
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter