Just curious if anybody seen any good deals that I may have missed. It will
have to be something real special to get me out early morning.

Rockler has some pretty good deals starting "locally" Friday thru Sunday.


"ToolMiser" wrote in message
...
Just curious if anybody seen any good deals that I may have missed. It
will
have to be something real special to get me out early morning.

"ToolMiser" wrote in message
...
Just curious if anybody seen any good deals that I may have missed. It
will
have to be something real special to get me out early morning.

You beat me to the punch asking the question. I'm going to do the Rockler
K-body deal at their sale on Saturday.
http://www.rockler.com/retail/flyer/3day-sale04-1.cfm. I'll probably use
the 25% off coupon to buy a bottle of Titebond II extended glue.

The Porter-Cable 690LR router is on sale at home depot right now for $99. I
was going to get one, until I realized I had to also buy a router speed
control to make it fully useful. That gets it within scatching distance of
a newer model router with the goodies built-in.

All-in-all, I haven't seen any killer deals except those 15 minute specials
on Amazon last week.

Bob

Hi, sort've woodworking. Lowes here in Knoxville, TN, has the Bosch 9 amp
Recip. saw with case for $69.95 Fri., Sat., and Sun. Not sure if it's
national. Hard to beat when you need one.

Tony


"ToolMiser" wrote in message
...
Just curious if anybody seen any good deals that I may have missed. It
will
have to be something real special to get me out early morning.

Harbor Freight has the 91772 turbine powered hvlp sprayer (ie. sprayer plus
compressor) on sale for $30 (thirty). Heh heh. I think I'm going to pass
on it though.

"ToolMiser" wrote in message
...
Just curious if anybody seen any good deals that I may have missed. It
will
have to be something real special to get me out early morning.

Home Depot here in No. VA has a Rigid 12 gal wet dry vacuum with
attachments for around $30.

(ToolMiser) wrote in message ...
Just curious if anybody seen any good deals that I may have missed. It will
have to be something real special to get me out early morning.

"Bob" wrote in
k.net:

snip
The Porter-Cable 690LR router is on sale at home depot right now for
$99. I was going to get one, until I realized I had to also buy a
router speed control to make it fully useful. That gets it within
scatching distance of a newer model router with the goodies built-in.

Although, at $99, it would make a nice second router, set up with either a
straight cutter when doing machine/jig DTs, or a smaller roundover, where
the variable speed isn't required.

Remember the recent thread about the disease? ;-)

Patriarch

Just noticed that Amazon is repeating the sale of the Bessey 24/40
clamp set for $125 & with and if you have one of their $25 off $100
coupons, you can grab it for $100.

I guess they are matching the Rockler deal this weekend. Nice if you
don't have a Rockler walk-in store near you.

I bought this set last week.

Lou

In article , ToolMiser
wrote:

Just curious if anybody seen any good deals that I may have missed. It will
have to be something real special to get me out early morning.

On 25 Nov 2004 18:48:21 GMT, (ToolMiser) wrote:

Just curious if anybody seen any good deals that I may have missed. It will
have to be something real special to get me out early morning.

I got a 4.5 hp 15 gallon "contractor" Shop Vac for $39 at Farm &
Fleet. $30 off, and I needed a bigger one anyhow. They flew off the
shelf at that price- but I get up at 4 am anyhow, so it wasn't much of
a stretch to drop in right when they opened and nab one.


Aut inveniam viam aut faciam

loutent wrote in
:

Just noticed that Amazon is repeating the sale of the Bessey 24/40
clamp set for $125 & with and if you have one of their $25 off $100
coupons, you can grab it for $100.

I guess they are matching the Rockler deal this weekend. Nice if you
don't have a Rockler walk-in store near you.

I bought this set last week.

Lou

In article , ToolMiser
wrote:

Just curious if anybody seen any good deals that I may have missed.
It will
have to be something real special to get me out early morning.


I just ordered without the $25.00 coupon for $199 and over. They priced
matched to Rockler + Rockler's shipping, took 10% of the difference off
and didn't charge me tax. Shipping was "Free" so for $105.87 I gots me
4 new Kbody's and 4 blocks..

Will fit nicely in my Beech scrap clamp rack..

Alan

loutent wrote in message ...
I guess they are matching the Rockler deal this weekend. Nice if you
don't have a Rockler walk-in store near you.


25% off coupon at Rockler will get you a FWWII for just under $80. If
you don't have a local store or a coupon, they are on sale at
forrestblades.com for $89. Either way, not too bad of a deal.

Eric

4.5 horsepower? LOL!

"Prometheus" wrote in message
...
On 25 Nov 2004 18:48:21 GMT, (ToolMiser) wrote:

Just curious if anybody seen any good deals that I may have missed. It
will
have to be something real special to get me out early morning.

I got a 4.5 hp 15 gallon "contractor" Shop Vac for $39 at Farm &
Fleet. $30 off, and I needed a bigger one anyhow. They flew off the
shelf at that price- but I get up at 4 am anyhow, so it wasn't much of
a stretch to drop in right when they opened and nab one.


Aut inveniam viam aut faciam

Infinity tools (www.infinitytools.com - saw blades, router bits,
Dadonator Dado set) is running a 10% off sale for items off their web
site (20% off router bits), and other specials. Shipping is free as
well for orders over $100.

Looking at their Dadonator set for a hint for an XMas gift from a
special someone (won Popular Woodworkings best new tool of 2004)


(ToolMiser) wrote in message ...
Just curious if anybody seen any good deals that I may have missed. It will
have to be something real special to get me out early morning.

On 25 Nov 2004 18:48:21 GMT, ToolMiser wrote:
Just curious if anybody seen any good deals that I may have missed. It will
have to be something real special to get me out early morning.

Not really a Black Friday Special, but there's a $30 rebate on the PC
plate joiner.

Looks like I have to go buy one now . .er . that is . . my wife's
Christmas presant (Nahm's small entertainment center in "Classics From
....) calls for plate joinery . . I WAS going to M&T the face frames, but
who can argue with the combined logic of a rebate AND Nahm . . .

On Fri, 26 Nov 2004 12:45:58 -0800, "CW"
wrote:

4.5 horsepower? LOL!

Well, that's what the box and the Vac say, but I haven't asked any
teams of horses to go head-to-head with it. Does seem a bit
overinflated, though- according to their claims, it's the most
powerful electric motor in my whole shop.

"Prometheus" wrote in message
.. .
On 25 Nov 2004 18:48:21 GMT, (ToolMiser) wrote:

Just curious if anybody seen any good deals that I may have missed. It
will
have to be something real special to get me out early morning.

I got a 4.5 hp 15 gallon "contractor" Shop Vac for $39 at Farm &
Fleet. $30 off, and I needed a bigger one anyhow. They flew off the
shelf at that price- but I get up at 4 am anyhow, so it wasn't much of
a stretch to drop in right when they opened and nab one.


Aut inveniam viam aut faciam


Aut inveniam viam aut faciam