Home |
Search |
Today's Posts |
![]() |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
Hiya,
I've resolved to find the funds to beat the Jan. 1 Grizzly price hike and decided to go ahead and purchase their 1023SL cabinet saw. However, today I went to Woodworkers Supply's website to check a couple of things and they've got this: http://woodworker.com/cgi-bin/FULLPR...14-761#114-761 For around the same price. Features are similar except the tilt and it weighs around 50 lbs. heavier. Not too concerned about the fence/length etc... as I've got a Vega 50" fence to put on whichever saw I get. I don't hear much about WoodTek and am just wondering if anyone has any experience with them? Is this worthwhile or should I just say to heck with it and get the Grizzly? WWS is local to me here in ABQ which might be helpful if there are issues with the Woodtek. Cheers, cc |
#2
![]() |
|||
|
|||
![]() " I don't hear much about WoodTek and am just wondering if anyone has any experience with them? No experience with WoodTek but I have owned a Grizzly 1023s for about 2-1/2 years and couldn't be happier. They were very quick with my delivery too - 36 hours after placing my internet order. I understand services is pretty good with Griz. Does Griz have the saw in stock. I understand from some posts they are back ordered on some machinery. RonB |
#3
![]() |
|||
|
|||
![]()
I would say don't do it.
I have a Woodtek bandsaw with which I am generally pleased. $/pound a very good value. However, it had a minor assembly (manufacturing) issue that they were unable to resolve through tech support. (There were 3 or four phone calls and a half-dozen emails incuding digital photos) I eventually diagnosed and solved the problem myself. Their tech support consisted of one very nice fellow who did not have access to the specific model of machine that I had purchased. To their credit, they offered to send me a new saw (from a different location). They were decent and responsive, but did not IMHO have the resources (spare parts on hand, backup personnel, additional stock with which to test) to properly support the product. Limited testimonials + marginal support is not worth a $50 savings. If I could walk into their storefront for service, I would defineitely consider it, but not mailorder. Hope that helps. Steve "James "Cubby" Culbertson" wrote in message ... Hiya, I've resolved to find the funds to beat the Jan. 1 Grizzly price hike and decided to go ahead and purchase their 1023SL cabinet saw. However, today I went to Woodworkers Supply's website to check a couple of things and they've got this: http://woodworker.com/cgi-bin/FULLPR...14-761#114-761 For around the same price. Features are similar except the tilt and it weighs around 50 lbs. heavier. Not too concerned about the fence/length etc... as I've got a Vega 50" fence to put on whichever saw I get. I don't hear much about WoodTek and am just wondering if anyone has any experience with them? Is this worthwhile or should I just say to heck with it and get the Grizzly? WWS is local to me here in ABQ which might be helpful if there are issues with the Woodtek. Cheers, cc |
#4
![]() |
|||
|
|||
![]()
IIRC Woodtek is a private label. I would stick with Grizzly.
"James "Cubby" Culbertson" wrote in message ... Hiya, I've resolved to find the funds to beat the Jan. 1 Grizzly price hike and decided to go ahead and purchase their 1023SL cabinet saw. However, today I went to Woodworkers Supply's website to check a couple of things and they've got this: http://woodworker.com/cgi-bin/FULLPR...14-761#114-761 For around the same price. Features are similar except the tilt and it weighs around 50 lbs. heavier. Not too concerned about the fence/length etc... as I've got a Vega 50" fence to put on whichever saw I get. I don't hear much about WoodTek and am just wondering if anyone has any experience with them? Is this worthwhile or should I just say to heck with it and get the Grizzly? WWS is local to me here in ABQ which might be helpful if there are issues with the Woodtek. Cheers, cc |
#5
![]() |
|||
|
|||
![]()
Leon responds:
IIRC Woodtek is a private label. I would stick with Grizzly. Woodtek is the label of the tool line imported by Woodworker's Supply. How does that make them different from Grizzly, which is imported by Grizzly? I haven't used this saw, but my experience with both Woodtek and Grizzly has been positive. Charlie Self "Health nuts are going to feel stupid someday, lying in hospitals dying of nothing." Redd Foxx |
#6
![]() |
|||
|
|||
![]()
On Wed, 24 Nov 2004 11:49:50 -0700, "James \"Cubby\" Culbertson"
wrote: Hiya, I've resolved to find the funds to beat the Jan. 1 Grizzly price hike and decided to go ahead and purchase their 1023SL cabinet saw. However, today I went to Woodworkers Supply's website to check a couple of things and they've got this: http://woodworker.com/cgi-bin/FULLPR...14-761#114-761 For around the same price. Features are similar except the tilt and it weighs around 50 lbs. heavier. Not too concerned about the fence/length etc... as I've got a Vega 50" fence to put on whichever saw I get. I don't hear much about WoodTek and am just wondering if anyone has any experience with them? Is this worthwhile or should I just say to heck with it and get the Grizzly? WWS is local to me here in ABQ which might be helpful if there are issues with the Woodtek. Cheers, cc When I was shopping for a TS I too had decided on the G1023SL but when I was visiting my local Woodworker's Supply store I decided to 'crawl under' the WoodTek. It didn't take me long to decide on the Grizzly. I forget the specific problems but the difference in feel between the Woodtek and the Grizzly Contractor's saw I was replacing was enough to convince me there was no contest. I've had the G1023SL for about a year and a half and I love it every time I use it. I would definitely pick the Grizzly over the WoodTek. TWS |
#7
![]() |
|||
|
|||
![]()
Thanks folks for the opinions. I think I'll just stick with the Grizzly
unless General has a major sale between now and the end of the year! Cheers, cc "TWS" wrote in message ... On Wed, 24 Nov 2004 11:49:50 -0700, "James \"Cubby\" Culbertson" wrote: Hiya, I've resolved to find the funds to beat the Jan. 1 Grizzly price hike and decided to go ahead and purchase their 1023SL cabinet saw. However, today I went to Woodworkers Supply's website to check a couple of things and they've got this: http://woodworker.com/cgi-bin/FULLPR...14-761#114-761 For around the same price. Features are similar except the tilt and it weighs around 50 lbs. heavier. Not too concerned about the fence/length etc... as I've got a Vega 50" fence to put on whichever saw I get. I don't hear much about WoodTek and am just wondering if anyone has any experience with them? Is this worthwhile or should I just say to heck with it and get the Grizzly? WWS is local to me here in ABQ which might be helpful if there are issues with the Woodtek. Cheers, cc When I was shopping for a TS I too had decided on the G1023SL but when I was visiting my local Woodworker's Supply store I decided to 'crawl under' the WoodTek. It didn't take me long to decide on the Grizzly. I forget the specific problems but the difference in feel between the Woodtek and the Grizzly Contractor's saw I was replacing was enough to convince me there was no contest. I've had the G1023SL for about a year and a half and I love it every time I use it. I would definitely pick the Grizzly over the WoodTek. TWS |
#8
![]() |
|||
|
|||
![]()
Which bandsaw? I'm considering the 18" Woodtek.
Brian. "Stephen M" wrote in message ... I would say don't do it. I have a Woodtek bandsaw with which I am generally pleased. $/pound a very good value. However, it had a minor assembly (manufacturing) issue that they were unable to resolve through tech support. (There were 3 or four phone calls and a half-dozen emails incuding digital photos) I eventually diagnosed and solved the problem myself. Their tech support consisted of one very nice fellow who did not have access to the specific model of machine that I had purchased. To their credit, they offered to send me a new saw (from a different location). They were decent and responsive, but did not IMHO have the resources (spare parts on hand, backup personnel, additional stock with which to test) to properly support the product. Limited testimonials + marginal support is not worth a $50 savings. If I could walk into their storefront for service, I would defineitely consider it, but not mailorder. Hope that helps. Steve "James "Cubby" Culbertson" wrote in message ... Hiya, I've resolved to find the funds to beat the Jan. 1 Grizzly price hike and decided to go ahead and purchase their 1023SL cabinet saw. However, today I went to Woodworkers Supply's website to check a couple of things and they've got this: http://woodworker.com/cgi-bin/FULLPR...14-761#114-761 For around the same price. Features are similar except the tilt and it weighs around 50 lbs. heavier. Not too concerned about the fence/length etc... as I've got a Vega 50" fence to put on whichever saw I get. I don't hear much about WoodTek and am just wondering if anyone has any experience with them? Is this worthwhile or should I just say to heck with it and get the Grizzly? WWS is local to me here in ABQ which might be helpful if there are issues with the Woodtek. Cheers, cc |
#9
![]() |
|||
|
|||
![]()
On Wed, 24 Nov 2004 18:21:34 -0800, "Brian"
wrote: Which bandsaw? I'm considering the 18" Woodtek. Brian. Gee, I don't know. I would take a look at the Rikons if I were you. I don't have one but the list of features for the price sure looks attractive. TWS |
#10
![]() |
|||
|
|||
![]() "Charlie Self" wrote in message ... Leon responds: IIRC Woodtek is a private label. I would stick with Grizzly. Woodtek is the label of the tool line imported by Woodworker's Supply. How does that make them different from Grizzly, which is imported by Grizzly? I haven't used this saw, but my experience with both Woodtek and Grizzly has been positive. Well Charlie, I have never heard up until now of anyone using or owning Woodtek equipment. I stand corrected. |
#11
![]() |
|||
|
|||
![]()
"Leon" wrote in
. com: "Charlie Self" wrote in message ... Leon responds: IIRC Woodtek is a private label. I would stick with Grizzly. Woodtek is the label of the tool line imported by Woodworker's Supply. How does that make them different from Grizzly, which is imported by Grizzly? I haven't used this saw, but my experience with both Woodtek and Grizzly has been positive. Well Charlie, I have never heard up until now of anyone using or owning Woodtek equipment. I stand corrected. My neighbor has a Woodtek 6" jointer. We've used it a couple of times, and I've been invited to use it for a number of projects. I think it irritates him that I use handplanes, rather than his jointer. The handplanes give me more consistent, predictable, desireable results. I don't trust that machine. Patriarch |
#12
![]() |
|||
|
|||
![]()
In article ,
"James \"Cubby\" Culbertson" wrote: Thanks folks for the opinions. I think I'll just stick with the Grizzly unless General has a major sale between now and the end of the year! Cheers, cc General does have a sale going on right now. Dealers should have a flyer with details, or you can view it on their website (www.general.ca I think). I don't have any connection with General, except for just buying a GI bandsaw on sale now. I have yet to cut anything with my saw, but it looks to be very well designed and nicely finished (damn near perfect). As to Woodtek, my only contact with their stuff is a Woodtek sander that my Dad said was the worst tool he had ever bought. It might not be useful to judge the quality of their entire line based on one crummy sander but I would be careful. Grizz seems like a much safer bet. David |
#13
![]() |
|||
|
|||
![]() |
#14
![]() |
|||
|
|||
![]()
That is the one.
e-mail me at sawdust(please no for more info. I did a lengthy writeup on it about 6-8 months ago. Google should find it. Steve "Brian" wrote in message ... Which bandsaw? I'm considering the 18" Woodtek. Brian. "Stephen M" wrote in message ... I would say don't do it. I have a Woodtek bandsaw with which I am generally pleased. $/pound a very good value. However, it had a minor assembly (manufacturing) issue that they were unable to resolve through tech support. (There were 3 or four phone calls and a half-dozen emails incuding digital photos) I eventually diagnosed and solved the problem myself. Their tech support consisted of one very nice fellow who did not have access to the specific model of machine that I had purchased. To their credit, they offered to send me a new saw (from a different location). They were decent and responsive, but did not IMHO have the resources (spare parts on hand, backup personnel, additional stock with which to test) to properly support the product. Limited testimonials + marginal support is not worth a $50 savings. If I could walk into their storefront for service, I would defineitely consider it, but not mailorder. Hope that helps. Steve "James "Cubby" Culbertson" wrote in message ... Hiya, I've resolved to find the funds to beat the Jan. 1 Grizzly price hike and decided to go ahead and purchase their 1023SL cabinet saw. However, today I went to Woodworkers Supply's website to check a couple of things and they've got this: http://woodworker.com/cgi-bin/FULLPR...14-761#114-761 For around the same price. Features are similar except the tilt and it weighs around 50 lbs. heavier. Not too concerned about the fence/length etc... as I've got a Vega 50" fence to put on whichever saw I get. I don't hear much about WoodTek and am just wondering if anyone has any experience with them? Is this worthwhile or should I just say to heck with it and get the Grizzly? WWS is local to me here in ABQ which might be helpful if there are issues with the Woodtek. Cheers, cc |
#15
![]() |
|||
|
|||
![]()
I saw the flyer. The one saw they had in the same ballpark as the Grizzly
and Woodtec (under $1000) appears to be nothing more than a contractor's saw with a fancy base. I may be wrong but it weighs around 150lb. lighter than the Grizzly. The saw I'd love is still around $2k so out of my budget! Thanks for the headsup though! Cheers, cc "Jane & David" wrote in message ... In article , "James \"Cubby\" Culbertson" wrote: Thanks folks for the opinions. I think I'll just stick with the Grizzly unless General has a major sale between now and the end of the year! Cheers, cc General does have a sale going on right now. Dealers should have a flyer with details, or you can view it on their website (www.general.ca I think). I don't have any connection with General, except for just buying a GI bandsaw on sale now. I have yet to cut anything with my saw, but it looks to be very well designed and nicely finished (damn near perfect). As to Woodtek, my only contact with their stuff is a Woodtek sander that my Dad said was the worst tool he had ever bought. It might not be useful to judge the quality of their entire line based on one crummy sander but I would be careful. Grizz seems like a much safer bet. David |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Grizzly G5959Z cabinet saw, 12" 5HP | Woodworking | |||
Grizzly 6" Jointer Experience | Woodworking | |||
A Few Notes on My New Grizzly G1018HW 8" jointer | Woodworking | |||
Grizzly Poor Customer service | Woodworking |