Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
adventures in ebonizing
so my current project has a number of small details that call for
ebonizing. the furniture is walnut. millwork to date has produced various scrap already dimensioned to some of the parameters of the details, so I figured I'd try ebonizing that. I made a batch of vinegar-and-steel wool. I left the steel wool in the vinegar until it completely dissolved, then ran it through a coffee filter. tested a sample of walnut in it. it came out nice and black. a through cut reveals that the color doesn't penetrate far though. as an experiment I tried treating the wood with strong black tea first, then the vinegar/steel wool solution. it produced a slightly, but noticeably, darker color than the vinegar/ steel wool solution alone, so that was the process I chose. if I try ebonizing a light wood like maple or birch I'll play with even stronger tea solutions. this project has ebonized details inlaid in a field of lightly tinted but otherwise unstained wood. I don't want to apply the tinted finish to the ebonized parts, so I'll be doing the inlay work between coats of finish. that is: spray sanding sealer sand spray tinted glaze coat till color is right rout out space for and apply inlay spray clear top coats till done. I'm a bit nervous about tooling into the color coat- dings and scratches at this point will be painfully obvious and essentially nonrepairable, so I may get a clear coat down first. the detail parts have swelled up with the moisture from the tea and vinegar/ steel wool solutions. if they don't return to size on their own I'll try a bit of heat to shrink them down. any thoughts? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
WTF??? Or, adventures in resurrecting an old mill | Metalworking |