Home |
Search |
Today's Posts |
![]() |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]() |
|||
|
|||
![]()
max1 wrote:
My wife and I are finishing a shell we had built. Doing everything from electrical, HVAC to cabinets and the deck. When this project started I had an 18V Ryobi which had served me well for several years prior to this "little" project. Of all things, the charger for it died. I decided to replace it with the 18V Milwaukee and I have been very pleased. I compared the Milwaukee and Bosch tools in two different stores and the chuck on the Milwaukee in both cases was MUCH smoother than the Bosch. For me, the Milwaukee just felt better in my hand. YMMV. In the last couple weeks we built the deck which is cedar - not exactly the hardest of woods. This drill could easily put the 3 1/2" deck screws clear through the 2x6 floor boards if I would let it. Another thing I like is the feel of the trigger. Makes starting screws one-handed in akward positions very easy. A final thing I liked was that the high speed of the Milwaukee was a little higher rpm than most other drills in this category. Comes in handy for certain drilling applications. Something to consider--the latest generation of 18v drills from Dewalt have a 3-speed transmission and go up to 2000 RPM on the high speed. On the negative side (if you count this as a negative) it nearly took my wrist off when drilling through some exceptionally tuff material and catching on a knot. I don't expect to have to buy another cordless drill for a very long time. Just my $0.02 Bob "Thomas Bunetta" wrote in message ... Just for added confusion I like my 19.2 Porter Cable! Tom "Ollie" wrote in message ... "Ollie" wrote in message ... Any strong pros or cons between these two tools? Wow - mainly pros for the tools that people have. That is not making my choice easier. Recently I have seen quite positive statements about Panasonic. And, the Hitachi looks good on paper. I had my 12V Skil for 10 years and it was reasonable, except the battery life was quite poor. I was leaning towards 18V, but perhaps there could be smaller and lighter 14.4V models that would in practice do all the things than the 18V models. First I had only two alternatives, but now there are 8 permutations - or perhaps even more if the low cost Grizzly is a realistic alternative. What would you do? -- --John Reply to jclarke at ae tee tee global dot net (was jclarke at eye bee em dot net) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
cordless drills - Panasonic or Makita NIMH | Woodworking | |||
cordless drill questions | Metalworking | |||
Makita 8433 Combi Cordless 14v or 18v | UK diy | |||
Makita Cordless Drill No Longer Reverses - Can I fix this? | Woodworking | |||
Electric sparks generated by my new cordless drill | Woodworking |