Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Advice needed for sliding door project run amok
I am building a cabinet with sliding doors (due to space constraints).
It is 36" high, 74" long and made from cherry plywood. I got 1/4" cherry for the sliding doors that are to run in a sliding door track I purchased from Rockler. The plywood I made the doors from was the wrong choice. It started warping and it very difficult to fit in the sliding door track. The rest of the project is complete but I need to find a better choice for the sliding doors (something that is stable and straight). I finished the doors the same as the cabinet(50/50 blend of Watco natural oil and poly followed by two coats of poly after the watco blend had fully dried) but clearly I need to changes horses. Do you have any suggestions for me? TIA. Dick Snyder |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Advice on installing sliding door closet | Home Repair | |||
Advice on installing sliding door closet | Home Repair | |||
Advice on installing sliding door closet | Home Repair | |||
Advice on installing sliding door closet | Home Repair | |||
Sliding patio door entry lock help needed | Home Repair |