Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Comcast
"Leon" wrote in message ... On 9/17/2012 10:51 PM, CW wrote: = If you are using the same antenna, there's your problem. Make no mistake in thinking that you can't use the same antenna. My sister used their same "new" analog antenna for years with great reception. The condition of the antenna tends to have an effect on reception. Their now old antenna deteriorated in the weather and reception suffered. Replacing with new again solved the problem. ================================================== =================== Turns out, a lot of places use the same VHF channels as they did on analog for their digital transmissions. Around here (Seattle area), the digital channels are on UHF requiring a different antenna. Hummmmm Good to know. Are your channel numbers the same? ================================================== ========================= Not for the digital channels. They still transmit the analog signal as well as the digital. The analog are on the same VHF channels they always were. The digital are on UHF. I haven't watched over the air TV in years. I have had satellite since the time when you had to buy your own equipment. Actually, if it were up to me, I wouldn't even own one but the wife thinks otherwise. Since it is available, I do watch 2 to 4 hours a week, depending on what's on. |