Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
I've been needing to build a drag box for my 55' Makita plunge saw
guides, so I finally broke down and built it yesterday. Using pristine Lauan plywood from some januwine Chiwanese package I received, I cut several strips of the beautiful stuff. Then I sawed a little slot in the middle of a couple shiny white fir furring strips. The middle strip is sandwiched between outers, creating the pair of roughly 5/8" x 57" pockets which protect the guides. For a quick cap, I stapled velcro strips onto another piece of fir, for a nice, secure retainer. Well, during the staple-down, I found that half the bloody 1" long 1/8" crown staples had blown out the side, preventing the open pocket inside. sigh One side worked fine, so I just had to remove the other. About this time, I spied the spare piece of 1/4" oak ply in my lumber stack and decided to fab the top from that. It's much, much nicer. 4 hand-rubbed coats of Waterlox later, we have this box which I can toss into the bed of the truck when I take the plunge saw to a client site: http://homeandgardenhandyman.com/MakitaGuideBox1.jpg http://homeandgardenhandyman.com/MakitaGuideBox2.jpg Q-sawn, even! http://homeandgardenhandyman.com/MakitaGuideBox3.jpg Note to Leon: Those are genuine Festool guide bars in those Makita guides. Pricy bastids, eh? -- A mind, like a home, is furnished by its owner, so if one's life is cold and bare he can blame none but himself. -- Louis L'Amour |
#2
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
In article , Larry Jaques
wrote: I've been needing to build a drag box for my 55' Makita plunge saw guides, so I finally broke down and built it yesterday. Using pristine Lauan plywood from some januwine Chiwanese package I received, I cut several strips of the beautiful stuff. Then I sawed a little slot in the middle of a couple shiny white fir furring strips. The middle strip is sandwiched between outers, creating the pair of roughly 5/8" x 57" pockets which protect the guides. For a quick cap, I stapled velcro strips onto another piece of fir, for a nice, secure retainer. Well, during the staple-down, I found that half the bloody 1" long 1/8" crown staples had blown out the side, preventing the open pocket inside. sigh One side worked fine, so I just had to remove the other. About this time, I spied the spare piece of 1/4" oak ply in my lumber stack and decided to fab the top from that. It's much, much nicer. 4 hand-rubbed coats of Waterlox later, we have this box which I can toss into the bed of the truck when I take the plunge saw to a client site: Helluva a truck bed to handle a 55 foot box, C-less... -- I used to like fishing because I thought it had some larger significance. Now I like fishing because itıs the one thing I can think of that probably doesnıt. * John Gierach |
#3
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
On 9/16/2012 1:07 PM, Larry Jaques wrote:
I've been needing to build a drag box for my 55' Makita plunge saw guides, so I finally broke down and built it yesterday. Using pristine Lauan plywood from some januwine Chiwanese package I received, I cut several strips of the beautiful stuff. Then I sawed a little slot in the middle of a couple shiny white fir furring strips. The middle strip is sandwiched between outers, creating the pair of roughly 5/8" x 57" pockets which protect the guides. For a quick cap, I stapled velcro strips onto another piece of fir, for a nice, secure retainer. Well, during the staple-down, I found that half the bloody 1" long 1/8" crown staples had blown out the side, preventing the open pocket inside. sigh One side worked fine, so I just had to remove the other. About this time, I spied the spare piece of 1/4" oak ply in my lumber stack and decided to fab the top from that. It's much, much nicer. 4 hand-rubbed coats of Waterlox later, we have this box which I can toss into the bed of the truck when I take the plunge saw to a client site: http://homeandgardenhandyman.com/MakitaGuideBox1.jpg http://homeandgardenhandyman.com/MakitaGuideBox2.jpg Q-sawn, even! http://homeandgardenhandyman.com/MakitaGuideBox3.jpg Note to Leon: Those are genuine Festool guide bars in those Makita guides. Pricy bastids, eh? Cool! Why did you not buy the Makita guide bars? |
#4
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
"Dave Balderstone" wrote in message news:160920121318157542%dave@N_O_T_T_H_I_Sbalderst one.ca... In article , Larry Jaques wrote: I've been needing to build a drag box for my 55' Makita plunge saw guides, so I finally broke down and built it yesterday. Using pristine Lauan plywood from some januwine Chiwanese package I received, I cut several strips of the beautiful stuff. Then I sawed a little slot in the middle of a couple shiny white fir furring strips. The middle strip is sandwiched between outers, creating the pair of roughly 5/8" x 57" pockets which protect the guides. For a quick cap, I stapled velcro strips onto another piece of fir, for a nice, secure retainer. Well, during the staple-down, I found that half the bloody 1" long 1/8" crown staples had blown out the side, preventing the open pocket inside. sigh One side worked fine, so I just had to remove the other. About this time, I spied the spare piece of 1/4" oak ply in my lumber stack and decided to fab the top from that. It's much, much nicer. 4 hand-rubbed coats of Waterlox later, we have this box which I can toss into the bed of the truck when I take the plunge saw to a client site: Helluva a truck bed to handle a 55 foot box, C-less... He lives in Oregon. They do logging there. Sooooo......, 55 foot trucks beds are common. |
#5
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
In article om, Lee
Michaels wrote: "Dave Balderstone" wrote in message news:160920121318157542%dave@N_O_T_T_H_I_Sbalderst one.ca... In article , Larry Jaques wrote: I've been needing to build a drag box for my 55' Makita plunge saw guides, so I finally broke down and built it yesterday. Using pristine Lauan plywood from some januwine Chiwanese package I received, I cut several strips of the beautiful stuff. Then I sawed a little slot in the middle of a couple shiny white fir furring strips. The middle strip is sandwiched between outers, creating the pair of roughly 5/8" x 57" pockets which protect the guides. For a quick cap, I stapled velcro strips onto another piece of fir, for a nice, secure retainer. Well, during the staple-down, I found that half the bloody 1" long 1/8" crown staples had blown out the side, preventing the open pocket inside. sigh One side worked fine, so I just had to remove the other. About this time, I spied the spare piece of 1/4" oak ply in my lumber stack and decided to fab the top from that. It's much, much nicer. 4 hand-rubbed coats of Waterlox later, we have this box which I can toss into the bed of the truck when I take the plunge saw to a client site: Helluva a truck bed to handle a 55 foot box, C-less... He lives in Oregon. They do logging there. Sooooo......, 55 foot trucks beds are common. I can picture it. C-Less on a truck trailer bed with a big ol' jummy wood log and a bowsaur. ROFLMAO! -- I used to like fishing because I thought it had some larger significance. Now I like fishing because itıs the one thing I can think of that probably doesnıt. * John Gierach |
#6
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
On 9/16/2012 1:07 PM, Larry Jaques wrote:
I've been needing to build a drag box for my 55' Makita plunge saw guides, so I finally broke down and built it yesterday. Using pristine Lauan plywood from some januwine Chiwanese package I received, I cut several strips of the beautiful stuff. Then I sawed a little slot in the middle of a couple shiny white fir furring strips. The middle strip is sandwiched between outers, creating the pair of roughly 5/8" x 57" pockets which protect the guides. For a quick cap, I stapled velcro strips onto another piece of fir, for a nice, secure retainer. Well, during the staple-down, I found that half the bloody 1" long 1/8" crown staples had blown out the side, preventing the open pocket inside. sigh One side worked fine, so I just had to remove the other. About this time, I spied the spare piece of 1/4" oak ply in my lumber stack and decided to fab the top from that. It's much, much nicer. 4 hand-rubbed coats of Waterlox later, we have this box which I can toss into the bed of the truck when I take the plunge saw to a client site: http://homeandgardenhandyman.com/MakitaGuideBox1.jpg http://homeandgardenhandyman.com/MakitaGuideBox2.jpg Q-sawn, even! http://homeandgardenhandyman.com/MakitaGuideBox3.jpg Note to Leon: Those are genuine Festool guide bars in those Makita guides. Pricy bastids, eh? Well done ... I have three guide rails and need to do the same thing. One of these days. BTW, you sure you don't want one of these? http://www.youtube.com/watch?v=a6F97WFYwkU My drug dealer twisted my arm and made me do it ... only $99 ... c'mon now, C_Less, in for a penny in for a pound, after all, Fast Efficient Safe! LOL -- www.eWoodShop.com Last update: 4/15/2010 KarlCaillouet@ (the obvious) http://gplus.to/eWoodShop |
#7
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
On Sun, 16 Sep 2012 17:33:03 -0400, "Lee Michaels" leemichaels*nadaspam* at
comcast dot net wrote: "Dave Balderstone" wrote in message news:160920121318157542%dave@N_O_T_T_H_I_Sbalders tone.ca... In article , Larry Jaques wrote: I've been needing to build a drag box for my 55' Makita plunge saw guides, so I finally broke down and built it yesterday. Using pristine Lauan plywood from some januwine Chiwanese package I received, I cut several strips of the beautiful stuff. Then I sawed a little slot in the middle of a couple shiny white fir furring strips. The middle strip is sandwiched between outers, creating the pair of roughly 5/8" x 57" pockets which protect the guides. For a quick cap, I stapled velcro strips onto another piece of fir, for a nice, secure retainer. Well, during the staple-down, I found that half the bloody 1" long 1/8" crown staples had blown out the side, preventing the open pocket inside. sigh One side worked fine, so I just had to remove the other. About this time, I spied the spare piece of 1/4" oak ply in my lumber stack and decided to fab the top from that. It's much, much nicer. 4 hand-rubbed coats of Waterlox later, we have this box which I can toss into the bed of the truck when I take the plunge saw to a client site: Helluva a truck bed to handle a 55 foot box, C-less... He lives in Oregon. They do logging there. Sooooo......, 55 foot trucks beds are common. What does a 55' Festool track cost?! |
#8
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
Larry Jaques wrote:
I've been needing to build a drag box for my 55' Makita plunge saw guides, so I finally broke down and built it yesterday. Using pristine Lauan plywood from some januwine Chiwanese package I received, I cut several strips of the beautiful stuff. Then I sawed a little slot in the middle of a couple shiny white fir furring strips. The middle strip is sandwiched between outers, creating the pair of roughly 5/8" x 57" pockets which protect the guides. For a quick cap, I stapled velcro strips onto another piece of fir, for a nice, secure retainer. Well, during the staple-down, I found that half the bloody 1" long 1/8" crown staples had blown out the side, preventing the open pocket inside. sigh One side worked fine, so I just had to remove the other. About this time, I spied the spare piece of 1/4" oak ply in my lumber stack and decided to fab the top from that. It's much, much nicer. 4 hand-rubbed coats of Waterlox later, we have this box which I can toss into the bed of the truck when I take the plunge saw to a client site: Now you need another box to protect the hand rubbed finish on this one. -- G.W. Ross It is better to die on your feet than to live on your knees. |
#9
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
On Sun, 16 Sep 2012 11:07:05 -0700, Larry Jaques
wrote: I've been needing to build a drag box for my 55' Makita plunge saw guides, so I finally broke down and built it yesterday. Using pristine Lauan plywood from some januwine Chiwanese package I received, I cut several strips of the beautiful stuff. Then I sawed a little slot in the middle of a couple shiny white fir furring strips. The middle strip is sandwiched between outers, creating the pair of roughly 5/8" x 57" pockets which protect the guides. For a quick cap, I stapled velcro strips onto another piece of fir, for a nice, secure retainer. Well, during the staple-down, I found that half the bloody 1" long 1/8" crown staples had blown out the side, preventing the open pocket inside. sigh One side worked fine, so I just had to remove the other. About this time, I spied the spare piece of 1/4" oak ply in my lumber stack and decided to fab the top from that. It's much, much nicer. 4 hand-rubbed coats of Waterlox later, we have this box which I can toss into the bed of the truck when I take the plunge saw to a client site: http://homeandgardenhandyman.com/MakitaGuideBox1.jpg http://homeandgardenhandyman.com/MakitaGuideBox2.jpg Q-sawn, even! http://homeandgardenhandyman.com/MakitaGuideBox3.jpg Note to Leon: Those are genuine Festool guide bars in those Makita guides. Pricy bastids, eh? So you use a semi and a crane with that 55 foot plunge saw guides? Mark |
#10
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
On Sun, 16 Sep 2012 15:36:53 -0500, Leon lcb11211@swbelldotnet
wrote: On 9/16/2012 1:07 PM, Larry Jaques wrote: I've been needing to build a drag box for my 55' Makita plunge saw guides, so I finally broke down and built it yesterday. Using pristine Lauan plywood from some januwine Chiwanese package I received, I cut several strips of the beautiful stuff. Then I sawed a little slot in the middle of a couple shiny white fir furring strips. The middle strip is sandwiched between outers, creating the pair of roughly 5/8" x 57" pockets which protect the guides. For a quick cap, I stapled velcro strips onto another piece of fir, for a nice, secure retainer. Well, during the staple-down, I found that half the bloody 1" long 1/8" crown staples had blown out the side, preventing the open pocket inside. sigh One side worked fine, so I just had to remove the other. About this time, I spied the spare piece of 1/4" oak ply in my lumber stack and decided to fab the top from that. It's much, much nicer. 4 hand-rubbed coats of Waterlox later, we have this box which I can toss into the bed of the truck when I take the plunge saw to a client site: http://homeandgardenhandyman.com/MakitaGuideBox1.jpg http://homeandgardenhandyman.com/MakitaGuideBox2.jpg Q-sawn, even! http://homeandgardenhandyman.com/MakitaGuideBox3.jpg Note to Leon: Those are genuine Festool guide bars in those Makita guides. Pricy bastids, eh? Cool! Why did you not buy the Makita guide bars? They don't make 'em. Go figure. Y'know, the more I use that thing, the more I love it. I can set it up and cut a very small piece of moulding and never get a splinter. Loverly! And the more I use it, the more possibilities I see. I'm glad you Texas Twins suckered me into the game. gd&r -- The most decisive actions of our life - I mean those that are most likely to decide the whole course of our future - are, more often than not, unconsidered. -- Andre Gide |
#11
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
On Sun, 16 Sep 2012 17:33:03 -0400, "Lee Michaels"
leemichaels*nadaspam* at comcast dot net wrote: "Dave Balderstone" wrote in message news:160920121318157542%dave@N_O_T_T_H_I_Sbalders tone.ca... In article , Larry Jaques wrote: I've been needing to build a drag box for my 55' Makita plunge saw Finger fart. Where'd that Shift key go, anyway? guides, so I finally broke down and built it yesterday. Using pristine Lauan plywood from some januwine Chiwanese package I received, I cut several strips of the beautiful stuff. Then I sawed a little slot in the middle of a couple shiny white fir furring strips. The middle strip is sandwiched between outers, creating the pair of roughly 5/8" x 57" pockets which protect the guides. For a See? I got it right here. quick cap, I stapled velcro strips onto another piece of fir, for a nice, secure retainer. Well, during the staple-down, I found that half the bloody 1" long 1/8" crown staples had blown out the side, preventing the open pocket inside. sigh One side worked fine, so I just had to remove the other. About this time, I spied the spare piece of 1/4" oak ply in my lumber stack and decided to fab the top from that. It's much, much nicer. 4 hand-rubbed coats of Waterlox later, we have this box which I can toss into the bed of the truck when I take the plunge saw to a client site: Helluva a truck bed to handle a 55 foot box, C-less... He lives in Oregon. They do logging there. Sooooo......, 55 foot trucks beds are common. Nope. The logs ARE the "bed". http://tinyurl.com/8q8nn85 -- The most decisive actions of our life - I mean those that are most likely to decide the whole course of our future - are, more often than not, unconsidered. -- Andre Gide |
#12
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
On Sun, 16 Sep 2012 16:41:32 -0500, Swingman wrote:
On 9/16/2012 1:07 PM, Larry Jaques wrote: I've been needing to build a drag box for my 55' Makita plunge saw guides, so I finally broke down and built it yesterday. Using pristine Lauan plywood from some januwine Chiwanese package I received, I cut several strips of the beautiful stuff. Then I sawed a little slot in the middle of a couple shiny white fir furring strips. The middle strip is sandwiched between outers, creating the pair of roughly 5/8" x 57" pockets which protect the guides. For a quick cap, I stapled velcro strips onto another piece of fir, for a nice, secure retainer. Well, during the staple-down, I found that half the bloody 1" long 1/8" crown staples had blown out the side, preventing the open pocket inside. sigh One side worked fine, so I just had to remove the other. About this time, I spied the spare piece of 1/4" oak ply in my lumber stack and decided to fab the top from that. It's much, much nicer. 4 hand-rubbed coats of Waterlox later, we have this box which I can toss into the bed of the truck when I take the plunge saw to a client site: http://homeandgardenhandyman.com/MakitaGuideBox1.jpg http://homeandgardenhandyman.com/MakitaGuideBox2.jpg Q-sawn, even! http://homeandgardenhandyman.com/MakitaGuideBox3.jpg Note to Leon: Those are genuine Festool guide bars in those Makita guides. Pricy bastids, eh? Well done ... I have three guide rails and need to do the same thing. One of these days. I finally got a round tuit. I want to see the one you build for your 106" long guide, Swingy. BTW, you sure you don't want one of these? http://www.youtube.com/watch?v=a6F97WFYwkU My drug dealer twisted my arm and made me do it ... only $99 ... c'mon now, C_Less, in for a penny in for a pound, after all, Fast Efficient Safe! LOL NO MORE, ya filthy pushers. Besides, I can live with an RCH of curve in my longer cuts. I don't need the $1,000 MF setup table, neither, ya thugs. (MF stands for MultiFunction, or...) -- The most decisive actions of our life - I mean those that are most likely to decide the whole course of our future - are, more often than not, unconsidered. -- Andre Gide |
#13
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
On Sun, 16 Sep 2012 18:13:20 -0400, "G. Ross"
wrote: Larry Jaques wrote: I've been needing to build a drag box for my 55' Makita plunge saw guides, so I finally broke down and built it yesterday. Using pristine Lauan plywood from some januwine Chiwanese package I received, I cut several strips of the beautiful stuff. Then I sawed a little slot in the middle of a couple shiny white fir furring strips. The middle strip is sandwiched between outers, creating the pair of roughly 5/8" x 57" pockets which protect the guides. For a quick cap, I stapled velcro strips onto another piece of fir, for a nice, secure retainer. Well, during the staple-down, I found that half the bloody 1" long 1/8" crown staples had blown out the side, preventing the open pocket inside. sigh One side worked fine, so I just had to remove the other. About this time, I spied the spare piece of 1/4" oak ply in my lumber stack and decided to fab the top from that. It's much, much nicer. 4 hand-rubbed coats of Waterlox later, we have this box which I can toss into the bed of the truck when I take the plunge saw to a client site: Now you need another box to protect the hand rubbed finish on this one. Nah! The Waterlox is tough, but when it gets scuffed, the nice thing about Waterlox is that you can simply take an old sock or sumpin' and rub some more on. Done in 15 minutes! I love my Waterlox. /gush -- The most decisive actions of our life - I mean those that are most likely to decide the whole course of our future - are, more often than not, unconsidered. -- Andre Gide |
#14
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
Larry Jaques wrote:
Nah! The Waterlox is tough, but when it gets scuffed, the nice thing about Waterlox is that you can simply take an old sock or sumpin' and rub some more on. Done in 15 minutes! I love my Waterlox. /gush How can it be "tough" when repairs work as you describe? Never used the stuff but you make it sound more like a shellac than a tough finish. Oh wait - it's a Tung Oil. Nice finish for sure, but tough? Nope. -- -Mike- |
#15
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
On 9/16/2012 7:11 PM, Larry Jaques wrote:
On Sun, 16 Sep 2012 15:36:53 -0500, Leon lcb11211@swbelldotnet wrote: On 9/16/2012 1:07 PM, Larry Jaques wrote: I've been needing to build a drag box for my 55' Makita plunge saw guides, so I finally broke down and built it yesterday. Using pristine Lauan plywood from some januwine Chiwanese package I received, I cut several strips of the beautiful stuff. Then I sawed a little slot in the middle of a couple shiny white fir furring strips. The middle strip is sandwiched between outers, creating the pair of roughly 5/8" x 57" pockets which protect the guides. For a quick cap, I stapled velcro strips onto another piece of fir, for a nice, secure retainer. Well, during the staple-down, I found that half the bloody 1" long 1/8" crown staples had blown out the side, preventing the open pocket inside. sigh One side worked fine, so I just had to remove the other. About this time, I spied the spare piece of 1/4" oak ply in my lumber stack and decided to fab the top from that. It's much, much nicer. 4 hand-rubbed coats of Waterlox later, we have this box which I can toss into the bed of the truck when I take the plunge saw to a client site: http://homeandgardenhandyman.com/MakitaGuideBox1.jpg http://homeandgardenhandyman.com/MakitaGuideBox2.jpg Q-sawn, even! http://homeandgardenhandyman.com/MakitaGuideBox3.jpg Note to Leon: Those are genuine Festool guide bars in those Makita guides. Pricy bastids, eh? Cool! Why did you not buy the Makita guide bars? They don't make 'em. Go figure. Y'know, the more I use that thing, the more I love it. I can set it up and cut a very small piece of moulding and never get a splinter. Loverly! And the more I use it, the more possibilities I see. I'm glad you Texas Twins suckered me into the game. gd&r With most of these caliber of power tool you never realize what else it will do until you start using it. |
#16
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
On 9/16/2012 8:54 PM, Larry Jaques wrote:
On Sun, 16 Sep 2012 16:41:32 -0500, Swingman wrote: On 9/16/2012 1:07 PM, Larry Jaques wrote: I've been needing to build a drag box for my 55' Makita plunge saw guides, so I finally broke down and built it yesterday. Using pristine Lauan plywood from some januwine Chiwanese package I received, I cut several strips of the beautiful stuff. Then I sawed a little slot in the middle of a couple shiny white fir furring strips. The middle strip is sandwiched between outers, creating the pair of roughly 5/8" x 57" pockets which protect the guides. For a quick cap, I stapled velcro strips onto another piece of fir, for a nice, secure retainer. Well, during the staple-down, I found that half the bloody 1" long 1/8" crown staples had blown out the side, preventing the open pocket inside. sigh One side worked fine, so I just had to remove the other. About this time, I spied the spare piece of 1/4" oak ply in my lumber stack and decided to fab the top from that. It's much, much nicer. 4 hand-rubbed coats of Waterlox later, we have this box which I can toss into the bed of the truck when I take the plunge saw to a client site: http://homeandgardenhandyman.com/MakitaGuideBox1.jpg http://homeandgardenhandyman.com/MakitaGuideBox2.jpg Q-sawn, even! http://homeandgardenhandyman.com/MakitaGuideBox3.jpg Note to Leon: Those are genuine Festool guide bars in those Makita guides. Pricy bastids, eh? Well done ... I have three guide rails and need to do the same thing. One of these days. I finally got a round tuit. I want to see the one you build for your 106" long guide, Swingy. BTW, you sure you don't want one of these? http://www.youtube.com/watch?v=a6F97WFYwkU My drug dealer twisted my arm and made me do it ... only $99 ... c'mon now, C_Less, in for a penny in for a pound, after all, Fast Efficient Safe! LOL NO MORE, ya filthy pushers. Besides, I can live with an RCH of curve in my longer cuts. Ohhhhhhh! the SHAME! You say that now but..... LOL |
#17
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
|
#18
Posted to rec.woodworking
|
|||
|
|||
Sorry, a real Woodworking post
[...snip...]
He lives in Oregon. They do logging there. Sooooo......, 55 foot trucks beds are common. Nope. The logs ARE the "bed". http://tinyurl.com/8q8nn85 Hmm, he's from Arkansas, right? In Orygun, we have REAL trees. Or used to. I have to say, this isn't what I had in mind when I read "real woodworking post". Should woodworking posts now have the subject line prefixed with "OT:"? Jim |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Real post: Rheem heater fan won't shut off, need advice | Electronics Repair | |||
Real post: Rheem heater fan won't shut off, need advice | Home Repair | |||
REAL POST New Vintage-Cambridge-Audio group | Electronics Repair | |||
A real non-troll post - What finish for pine window frames? | Woodworking | |||
Is there any way to save money on Title Insurance? (real post, not troll) | Home Ownership |