Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.woodworking
|
|||
|
|||
best way:
Hi I have a scenario to run bye you guys I have to cut 1/2' plywood panels
with 45 degree edges to make mitered joints .Is it better to cut plywood square and then run it though the router table that has a 45 degree bit? Sal |
#2
Posted to rec.woodworking
|
|||
|
|||
best way:
On 8/14/2012 8:22 PM, sal wrote:
Hi I have a scenario to run bye you guys I have to cut 1/2' plywood panels with 45 degree edges to make mitered joints .Is it better to cut plywood square and then run it though the router table that has a 45 degree bit? Better than what??? How large of pieces???? -- |
#3
Posted to rec.woodworking
|
|||
|
|||
best way:
On Tue, 14 Aug 2012 20:22:08 -0500, "sal" wrote:
Hi I have a scenario to run bye you guys I have to cut 1/2' plywood panels with 45 degree edges to make mitered joints .Is it better to cut plywood square and then run it though the router table that has a 45 degree bit? What are you cutting them with square with? If it's a tablesaw, then cutting them square and cutting the 45° angle all on the tablesaw is the easiest, fastest and most exact method. If you're cutting with a circular saw, then I'd still want to make the square and 45° cuts with that too. Trimming plywood with a router bit is messy and prone to mistakes. |
#4
Posted to rec.woodworking
|
|||
|
|||
best way:
Sorry I left out the (or cut the plywood on the tablesaw with blade at a
45degree) Sal "sal" wrote in message ... Hi I have a scenario to run bye you guys I have to cut 1/2' plywood panels with 45 degree edges to make mitered joints .Is it better to cut plywood square and then run it though the router table that has a 45 degree bit? Sal |
#5
Posted to rec.woodworking
|
|||
|
|||
best way:
On Tue, 14 Aug 2012 21:19:43 -0500, "sal" wrote:
Sorry I left out the (or cut the plywood on the tablesaw with blade at a 45degree) Cut it all on the tablesaw, no matter with size the panels are. |
#6
Posted to rec.woodworking
|
|||
|
|||
best way:
On 8/14/12 9:25 PM, Dave wrote:
On Tue, 14 Aug 2012 21:19:43 -0500, "sal" wrote: Sorry I left out the (or cut the plywood on the tablesaw with blade at a 45degree) Cut it all on the tablesaw, no matter with size the panels are. Yep... and I agree about the router. -- -MIKE- "Playing is not something I do at night, it's my function in life" --Elvin Jones (1927-2004) -- http://mikedrums.com ---remove "DOT" ^^^^ to reply |
#7
Posted to rec.woodworking
|
|||
|
|||
best way:
sal wrote:
Sorry I left out the (or cut the plywood on the tablesaw with blade at a 45degree) Cutting on the table saw is gooder. BUT: Don't depend on the saw's angle protractor. Get yourself an inclinometer to get the blade to 45d precisely. |
#8
Posted to rec.woodworking
|
|||
|
|||
best way:
"HeyBub" wrote in
m: sal wrote: Sorry I left out the (or cut the plywood on the tablesaw with blade at a 45degree) Cutting on the table saw is gooder. BUT: Don't depend on the saw's angle protractor. Get yourself an inclinometer to get the blade to 45d precisely. Pfffft. Unnecessary expense. Set up the table saw accurately to begin with. Then make a few test cuts in scrap to verify. |
#9
Posted to rec.woodworking
|
|||
|
|||
best way:
"sal" wrote in :
Sorry I left out the (or cut the plywood on the tablesaw with blade at a 45degree) Table saw. Definitely. "sal" wrote in message ... Hi I have a scenario to run bye you guys I have to cut 1/2' plywood panels with 45 degree edges to make mitered joints .Is it better to cut plywood square and then run it though the router table that has a 45 degree bit? |
#10
Posted to rec.woodworking
|
|||
|
|||
best way:
On 8/14/2012 8:22 PM, sal wrote:
Hi I have a scenario to run bye you guys I have to cut 1/2' plywood panels with 45 degree edges to make mitered joints .Is it better to cut plywood square and then run it though the router table that has a 45 degree bit? Sal When working with plywood you typically will get a better cut with a saw blade than a router bit in this situation. That said if your panels are relative large and are not perfectly flat your 45 degree cuts will not be straight or consistent. Experiment on scraps! |
#11
Posted to rec.woodworking
|
|||
|
|||
best way:
sal wrote:
Hi I have a scenario to run bye you guys I have to cut 1/2' plywood panels with 45 degree edges to make mitered joints .Is it better to cut plywood square and then run it though the router table that has a 45 degree bit? You decide... 1. On a table saw, you will get a 45 degree cut on two pieces with one cut. 2. To use a router, you have to cut the pieces on a saw then hog off the excess with your router bit. -- dadiOH ____________________________ Winters getting colder? Tired of the rat race? Maybe just ready for a change? Check it out... http://www.floridaloghouse.net |
#12
Posted to rec.woodworking
|
|||
|
|||
best way:
Thank you all for the advice table saw it is.
Top of the morning to you. Sal "sal" wrote in message ... Hi I have a scenario to run bye you guys I have to cut 1/2' plywood panels with 45 degree edges to make mitered joints .Is it better to cut plywood square and then run it though the router table that has a 45 degree bit? Sal |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|