Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,559
Default Moisture Meter

I noticed a few suggestions to get a moisture meter for someone's project,
and have been thinking about it myself. I've got rough cut lumber milled
from a tree, and I've got no idea what the moisture level is.

Any suggestions for a good relatively inexpensive meter?

Puckdropper
--
Make it to fit, don't make it fit.
  #2   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 592
Default Moisture Meter

In article om,
Puckdropper wrote:

I noticed a few suggestions to get a moisture meter for someone's project,
and have been thinking about it myself. I've got rough cut lumber milled
from a tree, and I've got no idea what the moisture level is.

Any suggestions for a good relatively inexpensive meter?


I've got this one, and it works well:

http://www.leevalley.com/en/wood/page.aspx?p=32548&cat=1,43513,45788

--
Woodworking and more at http://www.woodenwabbits.com
  #3   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 1,376
Default Moisture Meter

On 17 Dec 2011 23:38:30 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:

I noticed a few suggestions to get a moisture meter for someone's project,
and have been thinking about it myself. I've got rough cut lumber milled
from a tree, and I've got no idea what the moisture level is.

Any suggestions for a good relatively inexpensive meter?

Puckdropper



I've had the Lignomat below for a number of years. It work well.

http://www.amazon.com/Lignomat-MINI-.../dp/B0000224D7
--
Jack Novak
Buffalo, NY - USA
  #4   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 1,212
Default Moisture Meter

I have the same, it works well.
But I also have a little harbor freight unit. very small, and since it
was only $13 I take it to the lumber mill.

Very close readings to the Lingnomat. and for $13 if I drop it down a
pile or step or drop it while at the lumber mill I don't care.

On 12/17/2011 8:18 PM, Nova wrote:
On 17 Dec 2011 23:38:30 GMT, Puckdropper
puckdropper(at)yahoo(dot)com wrote:

I noticed a few suggestions to get a moisture meter for someone's project,
and have been thinking about it myself. I've got rough cut lumber milled
from a tree, and I've got no idea what the moisture level is.

Any suggestions for a good relatively inexpensive meter?

Puckdropper



I've had the Lignomat below for a number of years. It work well.

http://www.amazon.com/Lignomat-MINI-.../dp/B0000224D7

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moisture meter Steve Turner Woodworking 3 December 3rd 09 10:44 PM
Moisture meter Steve Turner Woodworking 1 December 3rd 09 09:18 PM
Moisture Meter robgraham UK diy 27 November 20th 07 09:30 AM
What moisture meter handy-andy UK diy 14 December 27th 06 03:10 AM
moisture meter Frank & Renee Woodworking 4 August 17th 05 02:03 AM


All times are GMT +1. The time now is 06:42 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"