Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
burled wood - what's it worth?
Well, after getting my great deal on the oak and poplar timbers, I was
doing some budget couselling last night for a guy who does tree removal. We started talking about the types of trees he cuts down and the fact tha woodworking was a hobby of mine. He cuts most of his hardwoods into firewood so I asked him to reserve for me, uncut, any large clear hardwood trunks, 5-10' in length which he said he would do for me. Anyway, as we're talking he started asking about trunks with deformities - big bumps or goiters growing out of them. He had been cutting them off and chopping them into firewood as well. He had one uncut from a maple tree - nice chunk of burl - about 28" x 16" eliptical half disk, about 4 inches thick in the trunk-side center. I got it for $10.00 So, how do I prepare it for use? What would I use to slice it into table top or veneer? Any idea how much this stuff goes for? I says he gets a lot of tree goiters and If I want them I can have them. Feedback appreciated. tillman |
#2
|
|||
|
|||
burled wood - what's it worth?
Ask in the wood turning group they work with burls on a regular basis.
Puf "tillius" wrote in message = om... Well, after getting my great deal on the oak and poplar timbers, I was doing some budget couselling last night for a guy who does tree removal. We started talking about the types of trees he cuts down and the fact tha woodworking was a hobby of mine. He cuts most of his hardwoods into firewood so I asked him to reserve for me, uncut, any large clear hardwood trunks, 5-10' in length which he said he would do for me. =20 Anyway, as we're talking he started asking about trunks with deformities - big bumps or goiters growing out of them. He had been cutting them off and chopping them into firewood as well. He had one uncut from a maple tree - nice chunk of burl - about 28" x 16" eliptical half disk, about 4 inches thick in the trunk-side center. =20 I got it for $10.00 =20 So, how do I prepare it for use? What would I use to slice it into table top or veneer? =20 Any idea how much this stuff goes for? I says he gets a lot of tree goiters and If I want them I can have them. Feedback appreciated. =20 tillman |
#3
|
|||
|
|||
burled wood - what's it worth?
Sounds like a gloat to me. But if not it should be at least a neener. Larry
"tillius" wrote in message om... . I got it for $10.00 goiters and If I want them I can have them. Feedback appreciated. tillman |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How Much Wood Are You Willing to “Waste” (Long) | Woodworking | |||
When I Am An Old Worker of Wood | Woodworking | |||
### everything you always wanted to know about wood (aka "micro-FAQ on wood") | Woodworking | |||
understanding wood painting... | Woodworking |