| Page 1 of 2 | 1 | 2 |
|
|
Must-have tool.
So this week I installed some cabinets in a new restaurant in
Rochester and somehow or another my favorite hammer disappeared. It's a small Craftsman brand hammer with a red rubber head on one side and a yellow plastic head on the other. It sits in the hamer loop of my Carhartt pants all day every day while I'm in the shop and I guess I didn't realize just how much I used it. It's perfect for tapping parts into alignment and I absolutely can't live without it now. So I sprung for the additional $10 and got myself another. Peace has been restored in my universe. Just thought I'd mention it because it's such a handy tool and I'd recommend it to any woodworker. JP |
Must-have tool.
On 3/19/2010 3:21 PM, Jay Pique wrote:
So this week I installed some cabinets in a new restaurant in Rochester and somehow or another my favorite hammer disappeared. It's a small Craftsman brand hammer with a red rubber head on one side and a yellow plastic head on the other. It sits in the hamer loop of my Carhartt pants all day every day while I'm in the shop and I guess I didn't realize just how much I used it. It's perfect for tapping parts into alignment and I absolutely can't live without it now. So I sprung for the additional $10 and got myself another. Peace has been restored in my universe. Just thought I'd mention it because it's such a handy tool and I'd recommend it to any woodworker. Know what you mean. My "pacifier" is a saddle square that stays in an apron pocket. If it's not there, I go looking for it until it is. I lost the old one on the last cabinet job, and bought two this time. -- www.e-woodshop.net Last update: 10/22/08 KarlC@ (the obvious) |
Must-have tool.
"Jay Pique" wrote in message ... So this week I installed some cabinets in a new restaurant in Rochester and somehow or another my favorite hammer disappeared. It's a small Craftsman brand hammer with a red rubber head on one side and a yellow plastic head on the other. It sits in the hamer loop of my Carhartt pants all day every day while I'm in the shop and I guess I didn't realize just how much I used it. It's perfect for tapping parts into alignment and I absolutely can't live without it now. So I sprung for the additional $10 and got myself another. Peace has been restored in my universe. Just thought I'd mention it because it's such a handy tool and I'd recommend it to any woodworker. JP If your luck is like mine, it will turn up almost immediately after you buy the replacement. I have had 3 pocket knives and a wrecking bar turn up that way. :~) |
Must-have tool.
On Mar 19, 4:33*pm, Swingman wrote:
On 3/19/2010 3:21 PM, Jay Pique wrote: So this week I installed some cabinets in a new restaurant in Rochester and somehow or another my favorite hammer disappeared. *It's a small Craftsman brand hammer with a red rubber head on one side and a yellow plastic head on the other. *It sits in the hamer loop of my Carhartt pants all day every day while I'm in the shop and I guess I didn't realize just how much I used it. *It's perfect for tapping parts into alignment and I absolutely can't live without it now. *So I sprung for the additional $10 and got myself another. *Peace has been restored in my universe. *Just thought I'd mention it because it's such a handy tool and I'd recommend it to any woodworker. Know what you mean. My "pacifier" is a saddle square that stays in an apron pocket. If it's not there, I go looking for it until it is. I lost the old one on the last cabinet job, and bought two this time. --www.e-woodshop.net Last update: 10/22/08 KarlC@ (the obvious) Mine is an old, beat up, half broken 16' tape measure. It has a small body that I like. I haven't seen any like it until I went to the BORG last week. They actually had them but packaged with a larger 25'. I might breakdown and buy it and give the 25' away. Allen |
Must-have tool.
On Fri, 19 Mar 2010 13:21:36 -0700 (PDT), Jay Pique
wrote: So this week I installed some cabinets in a new restaurant in Rochester and somehow or another my favorite hammer disappeared. It's a small Craftsman brand hammer with a red rubber head on one side and a yellow plastic head on the other. It sits in the hamer loop of my Carhartt pants all day every day while I'm in the shop and I guess I didn't realize just how much I used it. It's perfect for tapping parts into alignment and I absolutely can't live without it now. So I sprung for the additional $10 and got myself another. Peace has been restored in my universe. Just thought I'd mention it because it's such a handy tool and I'd recommend it to any woodworker. JP Sounds like a good tool. I don't need to go buy one, though. I just found one just like it at a new restaurant..... --DS |
Must-have tool.
"Leon" wrote If your luck is like mine, it will turn up almost immediately after you buy the replacement. I have had 3 pocket knives and a wrecking bar turn up that way. :~) Doncha know Leon? That is an excellent way to find tools! Works most of the time. |
Must-have tool.
"allen476" wrote Mine is an old, beat up, half broken 16' tape measure. It has a small body that I like. I haven't seen any like it until I went to the BORG last week. They actually had them but packaged with a larger 25'. I might breakdown and buy it and give the 25' away. ================= I have a big monstosity of a tape that my wife got for me. It is a bright, neon color. I found the perfect use for it. I leave it in the house on top of an enertainment center. My wife can locate it, doesn't lose it and can measure anything she wants with it. She doesn't steal my regular tape measures and has something big and colorful enough, she doesn't lose it. |
Must-have tool.
On 3/19/2010 4:00 PM, Leon wrote:
If your luck is like mine, it will turn up almost immediately after you buy the replacement. I have had 3 pocket knives and a wrecking bar turn up that way. :~) Yep, and no matter how long you put off buying the replacement, the old one won't turn up until you do. :-) -- See Nad. See Nad go. Go Nad! To reply, eat the taco. http://www.flickr.com/photos/bbqboyee/ |
Must-have tool.
On 3/19/2010 7:15 PM, Lee Michaels wrote:
I have a big monstosity of a tape that my wife got for me. It is a bright, neon color. I found the perfect use for it. I leave it in the house on top of an enertainment center. My wife can locate it, doesn't lose it and can measure anything she wants with it. She doesn't steal my regular tape measures and has something big and colorful enough, she doesn't lose it. Your wife loses stuff? Hmm, I'm not familiar with that concept... :-) -- "Even if your wife is happy but you're unhappy, you're still happier than you'd be if you were happy and your wife was unhappy." - Red Green To reply, eat the taco. http://www.flickr.com/photos/bbqboyee/ |
Must-have tool.
"Steve Turner" wrote in message ... On 3/19/2010 4:00 PM, Leon wrote: If your luck is like mine, it will turn up almost immediately after you buy the replacement. I have had 3 pocket knives and a wrecking bar turn up that way. :~) Yep, and no matter how long you put off buying the replacement, the old one won't turn up until you do. :-) .. Eggs sackly! Almost with out fail within a day or two. |
Must-have tool.
wrote in message ... On Fri, 19 Mar 2010 16:00:35 -0500, "Leon" wrote: If your luck is like mine, it will turn up almost immediately after you buy the replacement. I have had 3 pocket knives and a wrecking bar turn up that way. :~) I used to buy really nice expensive pocket knives. I always lost them. I finally gave up and bought a nice but inexpenisve Case, and I've had it for about 35 years now. I lost 3 Buck's and then about 28 years ago bought a Kershaw, I have not lost it yet. LOL |
Must-have tool.
On 3/19/2010 9:37 PM, Leon wrote:
wrote in message ... On Fri, 19 Mar 2010 16:00:35 -0500, wrote: If your luck is like mine, it will turn up almost immediately after you buy the replacement. I have had 3 pocket knives and a wrecking bar turn up that way. :~) I used to buy really nice expensive pocket knives. I always lost them. I finally gave up and bought a nice but inexpenisve Case, and I've had it for about 35 years now. I lost 3 Buck's and then about 28 years ago bought a Kershaw, I have not lost it yet. LOL Buy a Swiss Army knife ... that's one yuppie POS that you can't throw away without someone bringing it back to you. :( -- www.e-woodshop.net Last update: 10/22/08 KarlC@ (the obvious) |
Must-have tool.
"Leon" wrote in
: "Steve Turner" wrote in message ... Yep, and no matter how long you put off buying the replacement, the old one won't turn up until you do. :-) . Eggs sackly! Almost with out fail within a day or two. The next time I buy a 2' level, I'm buying one of those key finders for it. Next time it gets lost, I can walk around pressing the "find" button. One of these days, that level will show up again... Get used, lost, and not show up for another 6-12 months. Puckdropper -- Never teach your apprentice everything you know. |
Must-have tool.
On Fri, 19 Mar 2010 13:21:36 -0700 (PDT), Jay Pique
wrote: So this week I installed some cabinets in a new restaurant in Rochester and somehow or another my favorite hammer disappeared. It's a small Craftsman brand hammer with a red rubber head on one side and a yellow plastic head on the other. It sits in the hamer loop of my Carhartt pants all day every day while I'm in the shop and I guess I didn't realize just how much I used it. It's perfect for tapping parts into alignment and I absolutely can't live without it now. So I sprung for the additional $10 and got myself another. Peace has been restored in my universe. Just thought I'd mention it because it's such a handy tool and I'd recommend it to any woodworker. JP Hate the number of tools I lost. Fortunately its amazing how many I found up in ceilings and roofs and all the places I lost mine. Mike M |
Must-have tool.
On 3/19/2010 9:37 PM, Leon wrote:
wrote in message ... On Fri, 19 Mar 2010 16:00:35 -0500, wrote: If your luck is like mine, it will turn up almost immediately after you buy the replacement. I have had 3 pocket knives and a wrecking bar turn up that way. :~) I used to buy really nice expensive pocket knives. I always lost them. I finally gave up and bought a nice but inexpenisve Case, and I've had it for about 35 years now. I lost 3 Buck's and then about 28 years ago bought a Kershaw, I have not lost it yet. LOL No way! Almost the same story here (except I probably lost a lot more than three, and they weren't all Bucks); I was _always_ losing pocket knives, but about 18 years ago my mother in law bought me a Kershaw and it's still in my pocket today... -- See Nad. See Nad go. Go Nad! To reply, eat the taco. http://www.flickr.com/photos/bbqboyee/ |
Must-have tool.
On Fri, 19 Mar 2010 13:21:36 -0700 (PDT), Jay Pique
wrote: So this week I installed some cabinets in a new restaurant in Rochester and somehow or another my favorite hammer disappeared. It's a small Craftsman brand hammer with a red rubber head on one side and a yellow plastic head on the other. It sits in the hamer loop of my Carhartt pants all day every day while I'm in the shop and I guess I didn't realize just how much I used it. It's perfect for tapping parts into alignment and I absolutely can't live without it now. So I sprung for the additional $10 and got myself another. Peace has been restored in my universe. Just thought I'd mention it because it's such a handy tool and I'd recommend it to any woodworker. JP ....I love mine, too. It resides in my shop...but when I do a cabinet install job I've got a 2lb dead blow that gets lost regularly, lol, and gets found again or nothing else gets done! cg |
Must-have tool.
"Steve Turner" wrote in message ... On 3/19/2010 9:37 PM, Leon wrote: wrote in message ... On Fri, 19 Mar 2010 16:00:35 -0500, wrote: If your luck is like mine, it will turn up almost immediately after you buy the replacement. I have had 3 pocket knives and a wrecking bar turn up that way. :~) I used to buy really nice expensive pocket knives. I always lost them. I finally gave up and bought a nice but inexpenisve Case, and I've had it for about 35 years now. I lost 3 Buck's and then about 28 years ago bought a Kershaw, I have not lost it yet. LOL No way! Almost the same story here (except I probably lost a lot more than three, and they weren't all Bucks); I was _always_ losing pocket knives, but about 18 years ago my mother in law bought me a Kershaw and it's still in my pocket today... Boy wouldn't tham make a cool ad for Kershaw. The knife you cannot loose. LOL. Rethinking back, I probably got the Kershaw about 20 years ago. I gotta say, the Kershaw is a fine pocket knife. I has never gotten loose up like the Buck's did. |
Must-have tool.
On 3/20/2010 11:57 AM, Leon wrote:
Boy wouldn't tham make a cool ad for Kershaw. The knife you cannot loose. LOL. Rethinking back, I probably got the Kershaw about 20 years ago. I gotta say, the Kershaw is a fine pocket knife. I has never gotten loose up like the Buck's did. Too late ... Schrade Walden did that with their "Uncle Henry" knives over 50 years ago, in which the "lifetime guarantee" included loss. Since I simply can NOT lose a POS knife, but I can always somehow manage to lose the good ones, I availed myself of that a few times early in my yoot ... probably why they no longer do it (I'm assuming they got smart and quit doing it?) -- www.e-woodshop.net Last update: 10/22/08 KarlC@ (the obvious) |
Must-have tool.
"Leon" wrote in message ... Boy wouldn't tham make a cool ad for Kershaw. The knife you cannot loose. LOL. Rethinking back, I probably got the Kershaw about 20 years ago. I gotta say, the Kershaw is a fine pocket knife. I has never gotten loose up like the Buck's did. + Geeeeeeez! May I restate, It has never gotten loose like the Bucks did. |
Must-have tool.
On Mar 19, 4:21*pm, Jay Pique wrote:
So this week I installed some cabinets in a new restaurant in Rochester and somehow or another my favorite hammer disappeared. *It's a small Craftsman brand hammer with a red rubber head on one side and a yellow plastic head on the other. *It sits in the hamer loop of my Carhartt pants all day every day while I'm in the shop and I guess I didn't realize just how much I used it. *It's perfect for tapping parts into alignment and I absolutely can't live without it now. *So I sprung for the additional $10 and got myself another. *Peace has been restored in my universe. *Just thought I'd mention it because it's such a handy tool and I'd recommend it to any woodworker. JP Two tools (aside from shop-based favourites like a speed square) A 2 pound dead blow and my personal companion, http://tinyurl.com/ygjzj4u |
Must-have tool.
On Mar 20, 2:03*pm, Robatoy wrote:
On Mar 19, 4:21*pm, Jay Pique wrote: So this week I installed some cabinets in a new restaurant in Rochester and somehow or another my favorite hammer disappeared. *It's a small Craftsman brand hammer with a red rubber head on one side and a yellow plastic head on the other. *It sits in the hamer loop of my Carhartt pants all day every day while I'm in the shop and I guess I didn't realize just how much I used it. *It's perfect for tapping parts into alignment and I absolutely can't live without it now. *So I sprung for the additional $10 and got myself another. *Peace has been restored in my universe. *Just thought I'd mention it because it's such a handy tool and I'd recommend it to any woodworker. JP Two tools (aside from shop-based favourites like a speed square) A 2 pound dead blow and my personal companion,http://tinyurl.com/ygjzj4u Forgot to mention that I really like that knife because it opens with one hand. |
Must-have tool.
"Swingman" wrote in message ... On 3/20/2010 11:57 AM, Leon wrote: Too late ... Schrade Walden did that with their "Uncle Henry" knives over 50 years ago, in which the "lifetime guarantee" included loss. Since I simply can NOT lose a POS knife, but I can always somehow manage to lose the good ones, I availed myself of that a few times early in my yoot ... probably why they no longer do it (I'm assuming they got smart and quit doing it?) Not only do they not do that anymore, they went out of business several years ago. |
Must-have tool.
"Swingman" wrote in message ... On 3/20/2010 11:57 AM, Leon wrote: Boy wouldn't tham make a cool ad for Kershaw. The knife you cannot loose. LOL. Rethinking back, I probably got the Kershaw about 20 years ago. I gotta say, the Kershaw is a fine pocket knife. I has never gotten loose up like the Buck's did. Too late ... Schrade Walden did that with their "Uncle Henry" knives over 50 years ago, in which the "lifetime guarantee" included loss. Nooooo that is diffferent.... "lifetime guarantee against loss" they replace it if you loose it. The Kershaw "Can't" be lost. LOL |
Must-have tool.
CW wrote:
"Swingman" wrote in message ... On 3/20/2010 11:57 AM, Leon wrote: Too late ... Schrade Walden did that with their "Uncle Henry" knives over 50 years ago, in which the "lifetime guarantee" included loss. Since I simply can NOT lose a POS knife, but I can always somehow manage to lose the good ones, I availed myself of that a few times early in my yoot ... probably why they no longer do it (I'm assuming they got smart and quit doing it?) Not only do they not do that anymore, they went out of business several years ago. Well, don't suppose that those two things just _might_ be related??? :) -- |
Must-have tool.
On 3/20/2010 1:31 PM, Leon wrote:
wrote in message ... On 3/20/2010 11:57 AM, Leon wrote: Boy wouldn't tham make a cool ad for Kershaw. The knife you cannot loose. LOL. Rethinking back, I probably got the Kershaw about 20 years ago. I gotta say, the Kershaw is a fine pocket knife. I has never gotten loose up like the Buck's did. Too late ... Schrade Walden did that with their "Uncle Henry" knives over 50 years ago, in which the "lifetime guarantee" included loss. Nooooo that is diffferent.... "lifetime guarantee against loss" they replace it if you loose it. The Kershaw "Can't" be lost. LOL Wanna bet? ... I'll trade knives with you tonight, and we'll see in a few days. :) -- www.e-woodshop.net Last update: 10/22/08 KarlC@ (the obvious) |
Must-have tool.
Hi Steve=
I like your rockers. Beautiful work. Smitty ################################## On Mar 19, 4:18*pm, Steve Turner wrote: On 3/19/2010 4:00 PM, Leon wrote: If your luck is like mine, it will turn up almost immediately after you buy the replacement. *I have had 3 pocket knives and a wrecking bar turn up that way. *:~) Yep, and no matter how long you put off buying the replacement, the old one won't turn up until you do. *:-) -- See Nad. *See Nad go. *Go Nad! To reply, eat the taco.http://www.flickr.com/photos/bbqboyee/ |
Must-have tool.
On Fri, 19 Mar 2010 13:21:36 -0700 (PDT), the infamous Jay Pique
scrawled the following: So this week I installed some cabinets in a new restaurant in Rochester and somehow or another my favorite hammer disappeared. It's a small Craftsman brand hammer with a red rubber head on one side and a yellow plastic head on the other. It sits in the hamer loop of my Carhartt pants all day every day while I'm in the shop and I guess I didn't realize just how much I used it. It's perfect for tapping parts into alignment and I absolutely can't live without it now. So I sprung for the additional $10 and got myself another. Peace has been restored in my universe. Just thought I'd mention it because it's such a handy tool and I'd recommend it to any woodworker. I found myself without the correct density of rubber hammer for a job and sprung for a real live Nupla with 4 different screw-on heads and a fiberglass handle. Very nice. -- If we attend continually and promptly to the little that we can do, we shall ere long be surprised to find how little remains that we cannot do. -- Samuel Butler |
Must-have tool.
On Fri, 19 Mar 2010 22:03:36 -0500, the infamous Swingman
scrawled the following: On 3/19/2010 9:37 PM, Leon wrote: wrote in message ... On Fri, 19 Mar 2010 16:00:35 -0500, wrote: If your luck is like mine, it will turn up almost immediately after you buy the replacement. I have had 3 pocket knives and a wrecking bar turn up that way. :~) I used to buy really nice expensive pocket knives. I always lost them. I finally gave up and bought a nice but inexpenisve Case, and I've had it for about 35 years now. I lost 3 Buck's and then about 28 years ago bought a Kershaw, I have not lost it yet. LOL Buy a Swiss Army knife ... that's one yuppie POS that you can't throw away without someone bringing it back to you. :( Aw, yer taste is all in yer mouth, Swingy. I have a lovely little pal in my Victorinox Classic SD. Handy toothpick, tweezers (works on metal and wood splinters), small knife, scissors, nail file. I use it daily. I also have chisels, drawknives, box cutters, linoleum cutters, machetes, and half a dozen other blades for other things. Twine, boxes, nails, teeth, and splinters? This one is just -made- for it, and small enough to fit in my pocket without a single problem. I've used one for at least 35 years. (none lost came back, either.) So THERE! Mr. Swissdisser. Pffffffft! -- If we attend continually and promptly to the little that we can do, we shall ere long be surprised to find how little remains that we cannot do. -- Samuel Butler |
Must-have tool.
"Larry Jaques" wrote Aw, yer taste is all in yer mouth, Swingy. I have a lovely little pal in my Victorinox Classic SD. Handy toothpick, tweezers (works on metal and wood splinters), small knife, scissors, nail file. I use it daily. I also have chisels, drawknives, box cutters, linoleum cutters, machetes, and half a dozen other blades for other things. Twine, boxes, nails, teeth, and splinters? This one is just -made- for it, and small enough to fit in my pocket without a single problem. I've used one for at least 35 years. (none lost came back, either.) I have the same knife. I have gone through several of them. My wife has washed a couple of them too. But they still work OK. Ia addition to being a small multipurpose tool, I use it to open letters and packages. And its most important function, I can trim nose, ear and mustache hair with it! Try doing that with a big ole pocket knife. |
Must-have tool.
Chasgroh wrote in
: On Fri, 19 Mar 2010 13:21:36 -0700 (PDT), Jay Pique wrote: So this week I installed some cabinets in a new restaurant in Rochester and somehow or another my favorite hammer disappeared. It's a small Craftsman brand hammer with a red rubber head on one side and a yellow plastic head on the other. It sits in the hamer loop of my Carhartt pants all day every day while I'm in the shop and I guess I didn't realize just how much I used it. It's perfect for tapping parts into alignment and I absolutely can't live without it now. So I sprung for the additional $10 and got myself another. Peace has been restored in my universe. Just thought I'd mention it because it's such a handy tool and I'd recommend it to any woodworker. JP ...I love mine, too. It resides in my shop...but when I do a cabinet install job I've got a 2lb dead blow that gets lost regularly, lol, and gets found again or nothing else gets done! cg cg, HarborFright sells deadblows that are neon orange. http://www.harborfreight.com/cpi/cta...emnumber=41797 I'll bet those would be harder to lose. On the other hand if mine was yellow with black stripes I could probably loose it. Steve |
Must-have tool.
On Mar 21, 1:34*am, "Lee Michaels"
wrote: "Larry Jaques" *wrote Aw, yer taste is all in yer mouth, Swingy. *I have a lovely little pal in my Victorinox Classic SD. Handy toothpick, tweezers (works on metal and wood splinters), small knife, scissors, nail file. I use it daily. I also have chisels, drawknives, box cutters, linoleum cutters, machetes, and half a dozen other blades for other things. Twine, boxes, nails, teeth, and splinters? This one is just -made- for it, and small enough to fit in my pocket without a single problem. I've used one for at least 35 years. (none lost came back, either.) I have the same knife. I have gone through several of them. *My wife has washed a couple of them too. But they still work OK. Ia addition to being a small multipurpose tool, I use it to open letters and packages. And its most important function, I can trim nose, ear and mustache hair with it! Try doing that with a big ole pocket knife. MY Dutch Army Knife has a small motor which holds a routerbit and the battery also powers small wheels which makes the DAK travel across a 4 x 8 sheet cutting out patterns via GPS and ordinary uploaded G-code files....AND it has toothpik. |
Must-have tool.
"Steve" wrote: HarborFright sells deadblows that are neon orange. http://www.harborfreight.com/cpi/cta...emnumber=41797 Can't comment on the orange ones but the black ones will leave a mark. DAMHIKT Lew |
Must-have tool.
On Sat, 20 Mar 2010 11:03:41 -0700 (PDT), Robatoy
wrote: On Mar 19, 4:21*pm, Jay Pique wrote: So this week I installed some cabinets in a new restaurant in Rochester and somehow or another my favorite hammer disappeared. *It's a small Craftsman brand hammer with a red rubber head on one side and a yellow plastic head on the other. *It sits in the hamer loop of my Carhartt pants all day every day while I'm in the shop and I guess I didn't realize just how much I used it. *It's perfect for tapping parts into alignment and I absolutely can't live without it now. *So I sprung for the additional $10 and got myself another. *Peace has been restored in my universe. *Just thought I'd mention it because it's such a handy tool and I'd recommend it to any woodworker. JP Two tools (aside from shop-based favourites like a speed square) A 2 pound dead blow and my personal companion, http://tinyurl.com/ygjzj4u ....we're birds of a feather, only mine is a Kershaw that hooks onto the inside of my right pocket and flips out with my index finger and a flip of the wrist...that blade's dug into *many* strange and wonderful places! cg |
Must-have tool.
On Mar 20, 2:03*pm, Robatoy wrote:
On Mar 19, 4:21*pm, Jay Pique wrote: So this week I installed some cabinets in a new restaurant in Rochester and somehow or another my favorite hammer disappeared. *It's a small Craftsman brand hammer with a red rubber head on one side and a yellow plastic head on the other. *It sits in the hamer loop of my Carhartt pants all day every day while I'm in the shop and I guess I didn't realize just how much I used it. *It's perfect for tapping parts into alignment and I absolutely can't live without it now. *So I sprung for the additional $10 and got myself another. *Peace has been restored in my universe. *Just thought I'd mention it because it's such a handy tool and I'd recommend it to any woodworker. JP Two tools (aside from shop-based favourites like a speed square) A 2 pound dead blow and my personal companion,http://tinyurl.com/ygjzj4u I use a speed square a lot too. I took the extra metal parts off a big Swanson 12" super-speed square and use it just like...uhh.. a big square. Very handy for marking long screw lines, squaring up carcases and such. JP |
Must-have tool.
Robatoy wrote in news:0654aa18-78a3-4863-8ad1-
: MY Dutch Army Knife has a small motor which holds a routerbit and the battery also powers small wheels which makes the DAK travel across a 4 x 8 sheet cutting out patterns via GPS and ordinary uploaded G-code files....AND it has toothpik. What about the Bokma? -- Best regards Han email address is invalid |
Must-have tool.
Swingman wrote:
Buy a Swiss Army knife ... that's one yuppie POS that you can't throw away without someone bringing it back to you. :( I've been carrying the same Swiss Army knife around for about 30 years... My most used tool by far. The knives (it has two) are the least used part of it. The magnifying "glass" is probably the most used as my eyes age, but the tweezers, screw drivers (Phillips and slotted), bottle openers and scissors all get used more than the knife blades... Why would anyone carry around just a knife? -- Jack "I have not failed. I've just found ten thousand ways that won't work." -Thomas Edison http://jbstein.com |
Must-have tool.
On 3/21/2010 10:50 AM, Jack Stein wrote:
Swingman wrote: Buy a Swiss Army knife ... that's one yuppie POS that you can't throw away without someone bringing it back to you. :( I've been carrying the same Swiss Army knife around for about 30 years... My most used tool by far. The knives (it has two) are the least used part of it. The magnifying "glass" is probably the most used as my eyes age, but the tweezers, screw drivers (Phillips and slotted), bottle openers and scissors all get used more than the knife blades... Why would anyone carry around just a knife? I have two SAK's ... like I say, I can't get rid of the damned things. Besides, right tool for the job: If I need an "all purpose" tool on site on in the shop, a SAK will not do the job. For my three piece suit pocket when I'm hobnobbing with office effete elite, they work just fine .... and I can always find them. G -- www.e-woodshop.net Last update: 10/22/08 KarlC@ (the obvious) |
Must-have tool.
Mike M wrote:
Hate the number of tools I lost. Fortunately its amazing how many I found up in ceilings and roofs and all the places I lost mine. When I was gutting the bathroom in my first house, built around 1910-20 or so, when I opened the false ceiling, there lay the nicest, large, high quality steel linesman pliers/cutter I've seen. One of my most cherished tools. I think of the guy that lost them every time I use it, or even look at it, even though I have no idea who he was, he is still moocho appreciated:-) The moral is, if you are going to lose a tool, make it a high quality one, so you'll be appreciated for many years to come... -- Jack Please don't tell Obama what comes after a Trillion! http://jbstein.com |
Must-have tool.
Jack Stein wrote in -
september.org: I've been carrying the same Swiss Army knife around for about 30 years... Mine disappeared into the #$@%cking hands of the TSA idiocy. Yes it probably could have been used as a weapon, but still - here is an elderly guy who likes to peel his oranges with a knife ... -- Best regards Han email address is invalid |
| All times are GMT +1. The time now is 10:46 AM. |
|
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter