Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Cove Molding
Hi, All.
I need to make a cove molding from a 1.5" square piece of fir. I made some for another project, 4" wide with the table saw, cut at an angle. But that was a wide shallow cut. Can you make a round cut with a 1 inch radius??? No one makes cove cutters larger than 3/4 inch, so I'm guessing there is a trick. __ | * | * -------------1 inch radius | * | * |__________*| | | |--- 1.5"-----| | | Thanks for any help..... |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Light cove | Home Repair | |||
Questions about vinyl cove molding | Home Repair | |||
Where to buy a set of 5/8" cove molding knives | Woodworking | |||
Cove and pin Joint | Woodworking | |||
cove lighting | UK diy |