| Page 1 of 2 | 1 | 2 |
|
|
Tablesaw push stick?
Does anyone know where I could find a pattern for a tablesaw push stick on
the web that is comfortable to use? Regards. -Guy |
Tablesaw push stick?
you GOTTA be kidding!!
Now the rest of you guys here have an inkling of why I started the "Isn't relying on someone else's plans ..." thread back in August of last year??? sigh... dave Guy LaRochelle wrote: Does anyone know where I could find a pattern for a tablesaw push stick on the web that is comfortable to use? Regards. -Guy |
Tablesaw push stick?
in other words.... "I'm too freaking lazy to search the internet myself"...
Should you be running power tools? "Guy LaRochelle" wrote in message ... Does anyone know where I could find a pattern for a tablesaw push stick on the web that is comfortable to use? Regards. -Guy |
Tablesaw push stick?
I designed one very similar to yours.. except that my handle extends
forward more so that I have more leverage on downward pressure to prevent lifting. "Swingman" wrote in message ... "Guy LaRochelle" wrote in message Does anyone know where I could find a pattern for a tablesaw push stick on the web that is comfortable to use? Regards. -Guy Everyone has different ideas about what's comfortable/safe, and that might well change with the task. I have made many different styles down through the years and settled on one that is comfortable for most rips (picture on the website below, Fixtures and Jigs page ... just one look at it will allow you to copy it, and be my guest.) YMMV. -- www.e-woodshop.net Last update: 1/31/04 |
Tablesaw push stick?
"Guy LaRochelle" wrote in message
Does anyone know where I could find a pattern for a tablesaw push stick on the web that is comfortable to use? Regards. -Guy Everyone has different ideas about what's comfortable/safe, and that might well change with the task. I have made many different styles down through the years and settled on one that is comfortable for most rips (picture on the website below, Fixtures and Jigs page ... just one look at it will allow you to copy it, and be my guest.) YMMV. -- www.e-woodshop.net Last update: 1/31/04 |
Tablesaw push stick?
|
Tablesaw push stick?
"Leon" wrote in message
I designed one very similar to yours.. except that my handle extends forward more so that I have more leverage on downward pressure to prevent lifting. Sounds like we may be of the same school when it comes to controlling possible kickback situations by judicious force instead of ducking. ;) It's been a pretty comfortable design for me ... I can get a surprising amount of leverage just by rotating my wrist downwards without moving my hand. -- www.e-woodshop.net Last update: 1/31/04 |
Tablesaw push stick?
On Sun, 1 Feb 2004 11:33:02 -0600, "Guy LaRochelle"
wrote: Does anyone know where I could find a pattern for a tablesaw push stick on the web that is comfortable to use? Regards. -Guy here's what I do: take a triangle of plywood. the last few I have made were the cutoff from corner cabinets, but you could easily make your own triangles G. a right triangle with sides of about 12 to 16 inches will be about right. get out your most comfortable fitting handsaw, the one that you can cut for hours with without getting blisters. lay the triangle on the bench with the saw on top of it, with the spine of the saw about parallel to one of the 90 degree sides. trace around the saw handle. cut the line, sand round over and add a notch at the bottom to push the board with. I like that when holding this your fingers are curled up out of the way. |
Tablesaw push stick?
Pics on ABPW
-- SwampBug - - - - - - - - - - - - "Guy LaRochelle" wrote in message ... Does anyone know where I could find a pattern for a tablesaw push stick on the web that is comfortable to use? Regards. -Guy |
Tablesaw push stick?
Thanks..........to the guys who gave me a freindly response.
Some responded to the fact that I should do a search myself.........well I did that before putting the question on the group. I didn't like anything I saw...........every site wanted to sell me something and I was just looking for something different than the pattern I have from my Delta unisaw manual. I thought this is what the group was for. If I can't use it for that I will just unsubscribe. Personally, I think it is people like Rod who should unsubscribe or just read and keep the fingers off the keyboard. There is many times I read threads on newsgroups and would like to answer the way he did but I just keep it to myself. Again.................thankyou to the people who responded in a helpful manner. Regards. -Guy wrote in message news:6ebTb.160086$nt4.727312@attbi_s51... in other words.... "I'm too freaking lazy to search the internet myself"... Should you be running power tools? "Guy LaRochelle" wrote in message ... Does anyone know where I could find a pattern for a tablesaw push stick on the web that is comfortable to use? Regards. -Guy |
Tablesaw push stick?
Excellent idea! Thanks. Regards. -Guy
"Bridger" wrote in message ... On Sun, 1 Feb 2004 11:33:02 -0600, "Guy LaRochelle" wrote: Does anyone know where I could find a pattern for a tablesaw push stick on the web that is comfortable to use? Regards. -Guy here's what I do: take a triangle of plywood. the last few I have made were the cutoff from corner cabinets, but you could easily make your own triangles G. a right triangle with sides of about 12 to 16 inches will be about right. get out your most comfortable fitting handsaw, the one that you can cut for hours with without getting blisters. lay the triangle on the bench with the saw on top of it, with the spine of the saw about parallel to one of the 90 degree sides. trace around the saw handle. cut the line, sand round over and add a notch at the bottom to push the board with. I like that when holding this your fingers are curled up out of the way. |
Tablesaw push stick?
Ah yes, very similar to _my_ push stick stick.
I would say that yours is more Nahm inspired Functional, with a pleasing touch of Arts and Crafts inspired Utility, but definitely created in a "shop" and therefore more bourgeois... while mine has more of the graceful curves of a Maloof inspired, "studio created" piece, more appropriate for adding dignity to what would be an otherwise vulgar operation. -- www.e-woodshop.net Last update: 1/31/04 "SwampBug" wrote in message Pics on ABPW |
glass houses .... (?)
Thou oughtest not to be slothful to the destruction of the miscreants, but to
constrain them to obey our Lord God. --Rivers. Bay Area Dave wrote: you GOTTA be kidding!! Now the rest of you guys here have an inkling of why I started the "Isn't relying on someone else's plans ..." thread back in August of last year??? sigh... dave Guy LaRochelle wrote: Does anyone know where I could find a pattern for a tablesaw push stick on the web that is comfortable to use? Regards. -Guy |
Tablesaw push stick?
In article ,
"Swingman" wrote: I would say that yours is more Nahm inspired Functional, with a pleasing touch of Arts and Crafts inspired Utility, but definitely created in a "shop" and therefore more bourgeois... while mine has more of the graceful curves of a Maloof inspired, "studio created" piece, more appropriate for adding dignity to what would be an otherwise vulgar operation. I had an plastic snow brush for my car which had a really comfortable curve to the handle. It was the kind of handle which nestled firmly but gracefully in the hand, making the tool an extension of one's inner self. So I laid it on top of a piece of 3/4 pine scrap, traced it with a pencil, cut it out on the bandsaw, rounded the edges with a rasp and some 60-grit sandpaper, and put a notch in the end. I suppose you might call it "Nouveau K-Mart". I do like a nice glass of well-aged bourgeois with dinner, but only if I'm done using power tools for the day. |
Tablesaw push stick?
On Sun, 1 Feb 2004 11:33:02 -0600, "Guy LaRochelle"
wrote: Does anyone know where I could find a pattern for a tablesaw push stick on the web that is comfortable to use? Lay the cat down flat on some plywood and draw round it. |
Tablesaw push stick?
Guy LaRochelle wrote:
Does anyone know where I could find a pattern for a tablesaw push stick on the web that is comfortable to use? Regards. -Guy Sheesh. Read the whole thread and not one mention of dead cats. Thought for sure that this was an obvious straight line for some of the screwballs out there. Tom, are the photos of the contest entrants still out there somewhere? mahalo, jo4hn |
Tablesaw push stick?
Does anyone know where I could find a pattern for a tablesaw push stick on
the web that is comfortable to use? Regards. -Guy Yeah, look in the Harbor Freight catalog for the grey plastic pushstick and make one like it. Or just buy a couple three for $1.50 each. Dave Hall |
Tablesaw push stick?
Guy:
It's not the question but how you ask it. If you had stated that you did a search and couldn't find anything you probably wouldn't have not have gotten the responses you did. Next time give a little more background to your question. |
Tablesaw push stick?
Sun, Feb 1, 2004, 12:59pm (EST-1) (Guy=A0LaRochelle)
says: Thanks..........to the guys who gave me a freindly response. Acually, that looked like everyone. Just that a couple gave responses you didn't like. Doesn't mean it wasn't friendly. Some responded to the fact that I should do a search myself.........well I did that before putting the question on the group. I didn't like anything I saw And, you also didn't say that, so how is anyone to know? every site wanted to sell me something and I was just looking for something different than the pattern I have from my Delta unisaw manual. Musta been using the wrong search words then. Did you try changing your search phrase? I thought this is what the group was for. I beg your pardon? If I can't use it for that I will just unsubscribe. You didn't "subscribe" in the first place. Personally, I think it is people like Rod who should unsubscribe or just read and keep the fingers off the keyboard. Not really. I had the same thought. Probably a lot of others did too. After all, you didn't bother to say you had already looked, or any details. Lack of details, that'll get you every time. There is many times I read threads on newsgroups and would like to answer the way he did but I just keep it to myself. OK. Again.................thankyou to the people who responded in a helpful manner. Guess that pretty well include everyone then. Including Rod. Hehehe And, why in Hell do you put all thos periods in your sentences? JOAT It's what you learn after you know it all that counts. - Pete Maccarrone Life just ain't life without good music. - JOAT Web Page Update 31 Jan 2004. Some tunes I like. http://community-2.webtv.net/Jakofal...OMETUNESILIKE/ |
Tablesaw push stick?
Some pretty awesome projects you've completed. Great workmanship and
finishing. GREAT style! Don't get me started on your shop - to say it's fantastic is an understatement! It's obivious you've put a considerable amount of thought and work into it - BYW, do you heat it in the winter? How? Very nice set-up - Nick B "Swingman" wrote in message ... "Guy LaRochelle" wrote in message Does anyone know where I could find a pattern for a tablesaw push stick on the web that is comfortable to use? Regards. -Guy Everyone has different ideas about what's comfortable/safe, and that might well change with the task. I have made many different styles down through the years and settled on one that is comfortable for most rips (picture on the website below, Fixtures and Jigs page ... just one look at it will allow you to copy it, and be my guest.) YMMV. -- www.e-woodshop.net Last update: 1/31/04 |
Tablesaw push stick?
How do you hold the cat down, glue or brads? What kind of glue should I
use if my shop isn't heated, Gorilla or Titebond? If it's a long haired cat, should I use Titebond II or III??? Does Norm use brads or glue??? If David Marks uses cats, does that mean he works in a shop or a studio??? I did a Google search on brad nailers and cats and came up with nothing. Somebody shut me up before I explode........... Mark P.S. Birch ply or OSB.....tic tic tic tic BOOOOOOOOOOOOOOM Andy Dingley wrote: On Sun, 1 Feb 2004 11:33:02 -0600, "Guy LaRochelle" wrote: Does anyone know where I could find a pattern for a tablesaw push stick on the web that is comfortable to use? Lay the cat down flat on some plywood and draw round it. |
Tablesaw push stick?
Look again
jo4hn wrote: Guy LaRochelle wrote: Does anyone know where I could find a pattern for a tablesaw push stick on the web that is comfortable to use? Regards. -Guy Sheesh. Read the whole thread and not one mention of dead cats. Thought for sure that this was an obvious straight line for some of the screwballs out there. Tom, are the photos of the contest entrants still out there somewhere? mahalo, jo4hn |
Tablesaw push stick?
Roy Smith wrote:
So I laid it on top of a piece of 3/4 pine scrap, traced it with a pencil, cut it out on the bandsaw, rounded the edges with a rasp and some 60-grit sandpaper, and put a notch in the end. I suppose you might call it "Nouveau K-Mart". LOL! -- Mark |
Tablesaw push stick?
Sometimes a push stick is just a push stick!
-- SwampBug - - - - - - - - - - - - "Swingman" wrote in message ... Ah yes, very similar to _my_ push stick stick. I would say that yours is more Nahm inspired Functional, with a pleasing touch of Arts and Crafts inspired Utility, but definitely created in a "shop" and therefore more bourgeois... while mine has more of the graceful curves of a Maloof inspired, "studio created" piece, more appropriate for adding dignity to what would be an otherwise vulgar operation. -- www.e-woodshop.net Last update: 1/31/04 "SwampBug" wrote in message Pics on ABPW |
Tablesaw push stick?
Bay Area Dave wrote: you GOTTA be kidding!! Dave Good news. I see our friend DE is still with us! I'll bet you enjoyed seeing his pictures. Did you see the pictures he's posted. (I liked your plywood printer stand too. ) Wow, I hope he gets to keep the router bits! He's always up to such interesting stuff in the shop. Isn't he. Now you can ask him those questions you've been having? I hope he doesn't get shy again. I'm not sure but I think somebody said something snarky to him. Would you know anything about it Dave? I'm sure it was just a maturity mistake. Sometimes good people slip and do things they regret later. There isn't a man among us who hasn't made a mistake. It's sad but it happens. I'm sure we both agree whoever it was, is sorry and feels bad about it. In a sense, whoever it was, did something worse to himself. I think it's important to teach children that they will slip and fall but it is how they recover from it later that is important. And not let it define who they become, or to limit their growth. After-all, we are what we do. |
Tablesaw push stick?
Say Dave, care to regale us with the technical term for the
item the man is wanting a pattern for? Just remember, the term can't have "thingie" in it. UA100, who is thing, Stick For Manipulating Wood Through Saw Cutting Machine has a good ring to it but may be a wee bit longish... |
Tablesaw push stick?
Thanks for the kind words, Nick.
Heat? No heat or AC. We haven't had a freeze yet this winter that I am aware of, and I wear shorts and t-shirts in the shop year around no matter what. It gets downright balmy in the summer months, so I enjoy anything approaching cold while I can... this August I'll be looking back on January with fondness, wishing I could have stored it up somehow. -- www.e-woodshop.net Last update: 1/31/04 "Nick Bozovich" wrote in message BYW, do you heat it in the winter? How? Very nice set-up - |
Tablesaw push stick?
LOL ...
-- www.e-woodshop.net Last update: 1/31/04 "Roy Smith" wrote in message I had an plastic snow brush for my car which had a really comfortable curve to the handle. It was the kind of handle which nestled firmly but gracefully in the hand, making the tool an extension of one's inner self. So I laid it on top of a piece of 3/4 pine scrap, traced it with a pencil, cut it out on the bandsaw, rounded the edges with a rasp and some 60-grit sandpaper, and put a notch in the end. I suppose you might call it "Nouveau K-Mart". I do like a nice glass of well-aged bourgeois with dinner, but only if I'm done using power tools for the day. |
Tablesaw push stick?
tsk, tsk.
I wouldn't want to spoil your fun by revealing your identity... too bad for you I'm not biting. keep trying though; you are mildly entertaining, if not somewhat transparent. dave Jules wrote: Bay Area Dave wrote: you GOTTA be kidding!! Dave Good news. I see our friend DE is still with us! I'll bet you enjoyed seeing his pictures. Did you see the pictures he's posted. (I liked your plywood printer stand too. ) Wow, I hope he gets to keep the router bits! He's always up to such interesting stuff in the shop. Isn't he. Now you can ask him those questions you've been having? I hope he doesn't get shy again. I'm not sure but I think somebody said something snarky to him. Would you know anything about it Dave? I'm sure it was just a maturity mistake. Sometimes good people slip and do things they regret later. There isn't a man among us who hasn't made a mistake. It's sad but it happens. I'm sure we both agree whoever it was, is sorry and feels bad about it. In a sense, whoever it was, did something worse to himself. I think it's important to teach children that they will slip and fall but it is how they recover from it later that is important. And not let it define who they become, or to limit their growth. After-all, we are what we do. |
Tablesaw push stick?
make that "... if somewhat transparent".
keep trying though; you are mildly entertaining, if not somewhat transparent. |
Tablesaw push stick?
Bridger wrote in message . ..
On Sun, 1 Feb 2004 11:33:02 -0600, "Guy LaRochelle" wrote: Does anyone know where I could find a pattern for a tablesaw push stick on the web that is comfortable to use? Regards. -Guy here's what I do: take a triangle of plywood. the last few I have made were the cutoff from corner cabinets, but you could easily make your own triangles G. a right triangle with sides of about 12 to 16 inches will be about right. get out your most comfortable fitting handsaw, the one that you can cut for hours with without getting blisters. lay the triangle on the bench with the saw on top of it, with the spine of the saw about parallel to one of the 90 degree sides. trace around the saw handle. cut the line, sand round over and add a notch at the bottom to push the board with. I like that when holding this your fingers are curled up out of the way. That's exactly what I do, and it's worked out very well for me. Ed |
Tablesaw push stick?
Swingman-
I'm envious - it's about 7 degrees here tonight - about 2' of snow on the gound - no heat in my "shop" (garage), so no dust for awhile....one of these days I'm going to figure out how to heat it within my budget - "Swingman" wrote in message ... Thanks for the kind words, Nick. Heat? No heat or AC. We haven't had a freeze yet this winter that I am aware of, and I wear shorts and t-shirts in the shop year around no matter what. It gets downright balmy in the summer months, so I enjoy anything approaching cold while I can... this August I'll be looking back on January with fondness, wishing I could have stored it up somehow. -- www.e-woodshop.net Last update: 1/31/04 "Nick Bozovich" wrote in message BYW, do you heat it in the winter? How? Very nice set-up - |
Tablesaw push stick?
"Guy LaRochelle" wrote in message ... Thanks..........to the guys who gave me a freindly response. Some responded to the fact that I should do a search myself.........well I did that before putting the question on the group. I didn't like anything I saw...........every site wanted to sell me something and I was just looking Stay tuned for JOAT's next Google search class. Umm... when is the next one on the schedule? |
Tablesaw push stick?
"T." wrote in message ... And, you also didn't say that, so how is anyone to know? * I didn't know I had to write a book before asking a question just to explain why I am asking the question. Musta been using the wrong search words then. Did you try changing your search phrase? * Yes, maybe I was using the wrong search words. I am not an expert on browsing the web and I don't want to be because I would never get anything done. I thought this is what the group was for. I beg your pardon? * So what are newsgroups for if you can't ask questions? If I can't use it for that I will just unsubscribe. You didn't "subscribe" in the first place. * I use Outlook Express to access newsgroups and the terminology they use is "SUBSCRIBE". Personally, I think it is people like Rod who should unsubscribe or just read and keep the fingers off the keyboard. Not really. I had the same thought. Probably a lot of others did too. After all, you didn't bother to say you had already looked, or any details. Lack of details, that'll get you every time. * I'll try and remember that for next time. (I'll preceed my question with a book) There is many times I read threads on newsgroups and would like to answer the way he did but I just keep it to myself. OK. Again.................thankyou to the people who responded in a helpful manner. Guess that pretty well include everyone then. Including Rod. Hehehe And, why in Hell do you put all thos periods in your sentences? * I don't know, you tell me..............you seem to have all the answers.grin http://community-2.webtv.net/Jakofal...OMETUNESILIKE/ * For a guy who doesn't seem to like things in point form, meaning that I should write a book before asking a question to explain why I am asking the question, you should do some work on your website..........it gets a little too much to the point for my liking (and yours). |
Tablesaw push stick?
Mon, Feb 2, 2004, 2:56am (EST+5)
(Keith=A0Carlson) posts: Stay tuned for JOAT's next Google search class. Umm... when is the next one on the schedule? Soon as everyone that's registered pays their tuition. JOAT It's what you learn after you know it all that counts. - Pete Maccarrone Life just ain't life without good music. - JOAT Web Page Update 31 Jan 2004. Some tunes I like. http://community-2.webtv.net/Jakofal...OMETUNESILIKE/ |
Tablesaw push stick?
Yer right. Warn't there when I writ the first time.
j4 |
Tablesaw push stick?
Go to the Delta Tools website http://www.deltawoodworking.com/ and
open one of the owners manuals for the table saws. The 2nd to last page is a pattern for a push stick. If you need a pattern for a push block look here http://www.deltawoodworking.com/ Hope this helps you. |
Tablesaw push stick?
Look at a Kerosene heater. I bought one and am very pleased with it.
heats my 3-car garage just fine after an hour or so. Of course, I don't spray anything while it is running. On Mon, 02 Feb 2004 02:37:11 GMT, "Nick Bozovich" wrote: Swingman- I'm envious - it's about 7 degrees here tonight - about 2' of snow on the gound - no heat in my "shop" (garage), so no dust for awhile....one of these days I'm going to figure out how to heat it within my budget - "Swingman" wrote in message ... Thanks for the kind words, Nick. Heat? No heat or AC. We haven't had a freeze yet this winter that I am aware of, and I wear shorts and t-shirts in the shop year around no matter what. It gets downright balmy in the summer months, so I enjoy anything approaching cold while I can... this August I'll be looking back on January with fondness, wishing I could have stored it up somehow. -- www.e-woodshop.net Last update: 1/31/04 "Nick Bozovich" wrote in message BYW, do you heat it in the winter? How? Very nice set-up - |
Tablesaw push stick?
On Sun, 1 Feb 2004 12:55:48 -0600, "SwampBug"
wrote: Pics on ABPW mee too... pics on abpw G Bridger |
| All times are GMT +1. The time now is 06:24 PM. |
|
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter