Ok, I used my dust collector today. but in a different way.

For about 14 years I have bee procrastinating over the purchase of one of
those ceiling fan wands that are electrostatically charged and collect the
dust off of the fan blades. We have 5 ceiling fans and I finally gave in
and picked one up, I was tired of waving the vacuum wand around up there.
I approach the first fan and successfully cleaned all five blades with out
mishap if you don't count me gagging at the sight of what I had collected
with that wand. So dirty was the fluffy end of the wand that I decided to
clean the thing. Didn't want to wet it down and make mud and didn't want to
shake it in the wind or else the EPA would probably be paying me a visit.
Probably too quickly I thought, stick it in the DC hose and let the
collector suck it clean. WOW that worked better than I expected and I
managed to not let go of the fluffy wand during the procedure.


I approach ceiling fan number 2 with a big smile on my face and go to wiping
down the 5 blades. ;~((( Euwwwwwwww, there was tons of stuff coming
down on me like I was in a dust storm. I looked down at the floor and began
to gag again.... I'll have words with my son about how clean he keeps his
room tonight.

Same results with fans number 3,4, and 5. Oddly the fluffy electrostaticly
charged wand is sill clean as a whistle. Basically, the wand up and "quit".


Ok, I bet most of you can see where this is going. My dust collector is so
powerful that it sucked away all the fluffy wand's electronic
attractiveness.


My question, how do I reenergize, the electrostatic charge in my fluffy
wand? Perhaps start the dust collector and caress the out side of the hose
with the fluffy wand? ;~)

Seriously, how do you get that static attraction back?

"Leon" wrote in message ...
Ok, I used my dust collector today. but in a different way.

For about 14 years I have bee procrastinating over the purchase of one of
those ceiling fan wands that are electrostatically charged and collect the
dust off of the fan blades. We have 5 ceiling fans and I finally gave in
and picked one up, I was tired of waving the vacuum wand around up there.
I approach the first fan and successfully cleaned all five blades with out
mishap if you don't count me gagging at the sight of what I had collected
with that wand. So dirty was the fluffy end of the wand that I decided to
clean the thing. Didn't want to wet it down and make mud and didn't want to
shake it in the wind or else the EPA would probably be paying me a visit.
Probably too quickly I thought, stick it in the DC hose and let the
collector suck it clean. WOW that worked better than I expected and I
managed to not let go of the fluffy wand during the procedure.


I approach ceiling fan number 2 with a big smile on my face and go to wiping
down the 5 blades. ;~((( Euwwwwwwww, there was tons of stuff coming
down on me like I was in a dust storm. I looked down at the floor and began
to gag again.... I'll have words with my son about how clean he keeps his
room tonight.

Same results with fans number 3,4, and 5. Oddly the fluffy electrostaticly
charged wand is sill clean as a whistle. Basically, the wand up and "quit".


Ok, I bet most of you can see where this is going. My dust collector is so
powerful that it sucked away all the fluffy wand's electronic
attractiveness.


My question, how do I reenergize, the electrostatic charge in my fluffy
wand? Perhaps start the dust collector and caress the out side of the hose
with the fluffy wand? ;~)

Seriously, how do you get that static attraction back?



Pass it thru a helix.

Rub it in cat's fur.

P D Q

"Leon" wrote in message
...
Seriously, how do you get that static attraction back?

Maybe unground the DC ducts?

"PDQ" wrote in message
...




Pass it thru a helix.



Yeah, no that is how I caused the problem.


Rub it in cat's fur.


No cats.

P D Q

"Leon" wrote in message
...
Ok, I used my dust collector today. but in a different way.

For about 14 years I have bee procrastinating over the purchase of one of
those ceiling fan wands that are electrostatically charged and collect the
dust off of the fan blades. We have 5 ceiling fans and I finally gave in
and picked one up, I was tired of waving the vacuum wand around up there.
I approach the first fan and successfully cleaned all five blades with out
mishap if you don't count me gagging at the sight of what I had collected
with that wand. So dirty was the fluffy end of the wand that I decided
to clean the thing. Didn't want to wet it down and make mud and didn't
want to shake it in the wind or else the EPA would probably be paying me a
visit. Probably too quickly I thought, stick it in the DC hose and let
the collector suck it clean. WOW that worked better than I expected and
I managed to not let go of the fluffy wand during the procedure.


I approach ceiling fan number 2 with a big smile on my face and go to
wiping down the 5 blades. ;~((( Euwwwwwwww, there was tons of stuff
coming down on me like I was in a dust storm. I looked down at the floor
and began to gag again.... I'll have words with my son about how clean he
keeps his room tonight.

Same results with fans number 3,4, and 5. Oddly the fluffy
electrostaticly charged wand is sill clean as a whistle. Basically, the
wand up and "quit".


Ok, I bet most of you can see where this is going. My dust collector is
so powerful that it sucked away all the fluffy wand's electronic
attractiveness.


My question, how do I reenergize, the electrostatic charge in my fluffy
wand? Perhaps start the dust collector and caress the out side of the
hose with the fluffy wand? ;~)

Seriously, how do you get that static attraction back?

First, congrats on a novel Tim the Tool Man Taylor solution.

As far as restoring static cling, not sure. I don't think you can. Aren't
all products like this considered disposable? Wouldn't you be violating
some kinda marketing rule?

Besides, your fuzzy cleaning wand has just endured years of hard labor
cleaning your filthy ceiling fans. It may be time for a proper burial.

Leon wrote:
Ok, I used my dust collector today. but in a different way.

[snip]

Reverse the direction of spin on your RAS motor (see previous thread).
Start the motor. Hold the wand up next to the motor. Hang in there for
a half hour or so. Wash with Lava soap and water. Machine dry. Hang
in window. Rub cat with it. Smile.
:-)
jo4hn

Same results with fans number 3,4, and 5. Oddly the fluffy
electrostaticly charged wand is sill clean as a whistle. Basically, the
wand up and "quit".


Ok, I bet most of you can see where this is going. My dust collector is
so powerful that it sucked away all the fluffy wand's electronic
attractiveness.


My question, how do I reenergize, the electrostatic charge in my fluffy
wand? Perhaps start the dust collector and caress the out side of the
hose with the fluffy wand? ;~)

Seriously, how do you get that static attraction back?
Seems like I remember there used to be a spray can product you could spray
on a dust rag and it became charged so it would attract dust. May be how
the wand was treated and the dust collector removed the dust with such force
that it also removed or somehow dried out the chemical treatment. See if
you can find the product I referred to . Might be cheaper to buy a new
wand, however.

Tom G.

On Jan 22, 8:13*pm, "Leon" wrote:
"PDQ" wrote in message

...



Pass it thru a helix.

Yeah, no that is how I caused the problem.

Rub it in cat's fur.

No cats.

P D Q

Leon,

I know on the microfiber cloths I used for camera cleaning and for
tack rags, a simple wash and dry cycle, NO dryer sheets, works to
recharge them. It's the dryer, of course. Is your wand detachable so
it can be stuck n the dryer for 10-15 minutes, dryer set on low?

Leon wrote:

Seriously, how do you get that static attraction back?

1. Go some place dry

2. Put on leather soled shoes

3. Hold gizmo to charge in hands

4. Shuffle along rug

Seriously, look at the list in the link, determine the material of your
gizmo (nylon?) and then rub it with something of the opposite polarity.
http://science.howstuffworks.com/vdg1.htm

--

dadiOH
____________________________

dadiOH's dandies v3.06...
....a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico

"Charlie Self" wrote in message
...
On Jan 22, 8:13 pm, "Leon" wrote:
"PDQ" wrote in message

...



Pass it thru a helix.

Yeah, no that is how I caused the problem.

Rub it in cat's fur.

No cats.

P D Q

Leon,

I know on the microfiber cloths I used for camera cleaning and for
tack rags, a simple wash and dry cycle, NO dryer sheets, works to
recharge them. It's the dryer, of course. Is your wand detachable so
it can be stuck n the dryer for 10-15 minutes, dryer set on low?

Thanks Charlie, My wand is some type of thin hairy plastic/petroleum
product, not a cloth type material. I am afraid that even a low setting
could melt the thing.
Actually rubbing it on the outside of the collector flexible hose restored
some of the static charge, I wonder if I tried to comb my hair with it if
there would be some success. ;~)

BTY, I get my microfiber cloths at Sam's Club, I have also found them great
for cleaning windows, and 2 of them will completely dry my truck after I
wash it.

"Lee Michaels" wrote in message
...

First, congrats on a novel Tim the Tool Man Taylor solution.

LOL, I thought it was in order, the thing was brand new. I have never
quite so quickly rendered something useless.



As far as restoring static cling, not sure. I don't think you can.
Aren't all products like this considered disposable? Wouldn't you be
violating some kinda marketing rule?

Probably correct on that count. I recall when I managed an AC/Delco
wholesale diatributorship the guys in the ware house used these things to
dust the shelves, 20 years ago. I had forgotten that they seemed to work
great initially but after cleaning they pretty much became dust pushers.


Besides, your fuzzy cleaning wand has just endured years of hard labor
cleaning your filthy ceiling fans. It may be time for a proper burial.


I probably over stated the build up a bit. ;!) I am however going to turn
to a microfiber cloth on a wand for this task.

"jo4hn" wrote in message
m...
Leon wrote:
Ok, I used my dust collector today. but in a different way.

[snip]

Reverse the direction of spin on your RAS motor (see previous thread).
Start the motor. Hold the wand up next to the motor. Hang in there for a
half hour or so. Wash with Lava soap and water. Machine dry. Hang in
window. Rub cat with it. Smile.
:-)
jo4hn



Are you being a smart ass? ROTFLMAO

"Tom G" wrote in message
...



Seems like I remember there used to be a spray can product you could spray
on a dust rag and it became charged so it would attract dust. May be how
the wand was treated and the dust collector removed the dust with such
force that it also removed or somehow dried out the chemical treatment.
See if you can find the product I referred to . Might be cheaper to buy
a new wand, however.

Tom G.


$14 for the wand. I think you might be on to something, seems like Endust
does that.

"dadiOH" wrote in message
...
Leon wrote:

Seriously, how do you get that static attraction back?

1. Go some place dry

2. Put on leather soled shoes

3. Hold gizmo to charge in hands

4. Shuffle along rug

Seriously, look at the list in the link, determine the material of your
gizmo (nylon?) and then rub it with something of the opposite polarity.
http://science.howstuffworks.com/vdg1.htm

Good Link Thanks

Tom G wrote:

Seems like I remember there used to be a spray can product you could spray
on a dust rag and it became charged so it would attract dust.

snip"

Endust?

http://www.endust.com/

--
Jack Novak
Buffalo, NY - USA

Leon wrote:

Actually rubbing it on the outside of the collector flexible hose
restored some of the static charge, I wonder if I tried to comb my
hair with it if there would be some success. ;~)

Hold it in your mouth and shuffle back and forth across a carpet while
rubbing an inflated balloon in your hair. Just don't let anyone see you
doing so.

On Thu, 22 Jan 2009 19:02:18 -0600, "Leon"
wrote:

Can ya write off a trip to Las Vegas as a business expense, if you bring your
fan cleaner and walk across a casino carpet with it?

BTW, I use a fan cleaning brush, not sure if it's electro-static or not... I
hold it up to the DC fitting also..

Little tip, though... Having 5 fans and some dust allergies, I learned fast that
the brush in one hand and the shop vac hose in the other saves a lot of grief..

I do a quick run with the vac wand first, then if I'm working alone, I use the
wand pressed against the fan blade to keep the damn thing from spinning..
Works best if My with holds the vac while I use the brush, though..


Ok, I used my dust collector today. but in a different way.

For about 14 years I have bee procrastinating over the purchase of one of
those ceiling fan wands that are electrostatically charged and collect the
dust off of the fan blades. We have 5 ceiling fans and I finally gave in
and picked one up, I was tired of waving the vacuum wand around up there.
I approach the first fan and successfully cleaned all five blades with out
mishap if you don't count me gagging at the sight of what I had collected
with that wand. So dirty was the fluffy end of the wand that I decided to
clean the thing. Didn't want to wet it down and make mud and didn't want to
shake it in the wind or else the EPA would probably be paying me a visit.
Probably too quickly I thought, stick it in the DC hose and let the
collector suck it clean. WOW that worked better than I expected and I
managed to not let go of the fluffy wand during the procedure.


I approach ceiling fan number 2 with a big smile on my face and go to wiping
down the 5 blades. ;~((( Euwwwwwwww, there was tons of stuff coming
down on me like I was in a dust storm. I looked down at the floor and began
to gag again.... I'll have words with my son about how clean he keeps his
room tonight.

Same results with fans number 3,4, and 5. Oddly the fluffy electrostaticly
charged wand is sill clean as a whistle. Basically, the wand up and "quit".


Ok, I bet most of you can see where this is going. My dust collector is so
powerful that it sucked away all the fluffy wand's electronic
attractiveness.


My question, how do I reenergize, the electrostatic charge in my fluffy
wand? Perhaps start the dust collector and caress the out side of the hose
with the fluffy wand? ;~)

Seriously, how do you get that static attraction back?



mac

Please remove splinters before emailing

On Jan 23, 11:23*am, "Leon" wrote:
"dadiOH" wrote in message

...

Leon wrote:

Seriously, how do you get that static attraction back?

1. Go some place dry

2. Put on leather soled shoes

3. Hold gizmo to charge in hands

4. *Shuffle along rug

Seriously, look at the list in the link, determine the material of your
gizmo (nylon?) and then rub it with something of the opposite polarity.
http://science.howstuffworks.com/vdg1.htm

Good Link Thanks

When all else fails..e-mail me and I will give you the address of my
ex. There is always plenty of static around her.

On Thu, 22 Jan 2009 20:17:11 -0500, "Lee Michaels"
wrote:

First, congrats on a novel Tim the Tool Man Taylor solution.

As far as restoring static cling, not sure. I don't think you can. Aren't
all products like this considered disposable? Wouldn't you be violating
some kinda marketing rule?

Besides, your fuzzy cleaning wand has just endured years of hard labor
cleaning your filthy ceiling fans. It may be time for a proper burial.

Probably cleaned the DC, too...


mac

Please remove splinters before emailing

On Fri, 23 Jan 2009 20:13:49 +0000, Leon wrote
(in article ):

I have been using the house vac wand and that worked pretty good but I was
hoping for something that did not require dragging out the vac. The Irobot
Roomba has spoiled me.


I normally just sit on the floor and let the French maid climb up a tall
stepladder with a pack of Q tips....