Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Looking for High speed steel source in canada
Looking for HSS blanks preferably hardend already.
Thanx Mat |
#2
|
|||
|
|||
Looking for High speed steel source in canada
On Sun, 25 Jan 2004 22:40:34 GMT, "blabla" wrote:
Looking for HSS blanks preferably hardend already. Thanx Mat blank whats? |
#3
|
|||
|
|||
Looking for High speed steel source in canada
Probably blanks for some type of moulding head, but more details would be
helpful. "Bridger" wrote in message ... On Sun, 25 Jan 2004 22:40:34 GMT, "blabla" wrote: Looking for HSS blanks preferably hardend already. Thanx Mat blank whats? |
#4
|
|||
|
|||
Looking for High speed steel source in canada
blabla wrote:
Looking for HSS blanks preferably hardend already. Also inquire in rec.crafts.metalworking Lots of good folks there. -- Mark |
#5
|
|||
|
|||
Looking for High speed steel source in canada
Oops - square and rectangular stock 1/4" x 1/2" and 1/2" x 1/2", 8" or more
"Bridger" wrote in message ... On Sun, 25 Jan 2004 22:40:34 GMT, "blabla" wrote: Looking for HSS blanks preferably hardend already. Thanx Mat blank whats? |
#6
|
|||
|
|||
Looking for High speed steel source in canada
8" is pretty long. KBC tools has some. longest will probably be 4". You
might get a HSS cutoff blade 1/4 X 1 X 6. Ford tool steel will have A2 & M2 and other varieties unhardened cut to your length. Then you will have to hardened & grind them. Wendell "blabla" wrote in message news:CBXQb.274069$ts4.250087@pd7tw3no... Looking for HSS blanks preferably hardend already. Thanx Mat |
#7
|
|||
|
|||
Looking for High speed steel source in canada
On Sun, 25 Jan 2004 22:40:34 GMT, "blabla" wrote:
Looking for HSS blanks preferably hardend already. Power hacksaw blades. My last ones were a couple of feet long and only £3 each. Hardened HSS is near unworkable though, and you can't anneal it. |
#8
|
|||
|
|||
Looking for High speed steel source in canada
1/2" square x 8" long HSS tooling blank at MSC:
http://www.mscdirect.com/IWCatSectio...artFlow=t&M e rchant_Id=1&p_section_Id=747&Section_Id=747&p_prod uct_type_Id=417&ShowProduc tList=t&p_att_type_id_0=27315&p_att_value_id_0=217 20&p_search_flag_0=1&p_att _type_id_1=21901&p_att_value_id_1=339267&p_search_ flag_1=1&p_att_type_id_2=2 7314&p_att_value_id_2=294062&p_search_flag_2=1&Sel ectedAtt.length=3&pbegin=0 &pcount=15&NameVector%5B0%5D.Name=Square+Size&Name Vector%5B0%5D.Value=.5000& NameVector%5B1%5D.Name=Material&NameVector%5B1%5D. Value=HSS&NameVector%5B2%5 D.Name=Overall+Length&NameVector%5B2%5D.Value=8.00 00&NameVector.length=3&Vie w.x.x=87&View.x.y=10 Ian "blabla" wrote in message news:QQYQb.264963$JQ1.32678@pd7tw1no... Oops - square and rectangular stock 1/4" x 1/2" and 1/2" x 1/2", 8" or more "Bridger" wrote in message ... On Sun, 25 Jan 2004 22:40:34 GMT, "blabla" wrote: Looking for HSS blanks preferably hardend already. Thanx Mat blank whats? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
looking for small steel square tubing source | Metalworking | |||
Bench Vise Questions (Steel vs. Iron) | Metalworking |