Looking for High speed steel source in canada
 

Looking for HSS blanks preferably hardend already.

Thanx Mat

Looking for High speed steel source in canada
 

On Sun, 25 Jan 2004 22:40:34 GMT, "blabla" wrote:

Looking for HSS blanks preferably hardend already.

Thanx Mat



blank whats?

Looking for High speed steel source in canada
 

Probably blanks for some type of moulding head, but more details would be
helpful.

"Bridger" wrote in message
...
On Sun, 25 Jan 2004 22:40:34 GMT, "blabla" wrote:

Looking for HSS blanks preferably hardend already.

Thanx Mat



blank whats?

Looking for High speed steel source in canada
 

blabla wrote:
Looking for HSS blanks preferably hardend already.

Also inquire in rec.crafts.metalworking Lots of good folks there.

-- Mark

Looking for High speed steel source in canada
 

Oops - square and rectangular stock 1/4" x 1/2" and 1/2" x 1/2", 8" or more
"Bridger" wrote in message
...
On Sun, 25 Jan 2004 22:40:34 GMT, "blabla" wrote:

Looking for HSS blanks preferably hardend already.

Thanx Mat



blank whats?

Looking for High speed steel source in canada
 

8" is pretty long. KBC tools has some. longest will probably be 4". You
might get a HSS cutoff blade 1/4 X 1 X 6. Ford tool steel will have A2 & M2
and other varieties unhardened cut to your length. Then you will have to
hardened & grind them.

Wendell
"blabla" wrote in message
news:CBXQb.274069$ts4.250087@pd7tw3no...
Looking for HSS blanks preferably hardend already.

Thanx Mat

Looking for High speed steel source in canada
 

On Sun, 25 Jan 2004 22:40:34 GMT, "blabla" wrote:

Looking for HSS blanks preferably hardend already.

Power hacksaw blades. My last ones were a couple of feet long and
only £3 each.

Hardened HSS is near unworkable though, and you can't anneal it.

Looking for High speed steel source in canada
 

1/2" square x 8" long HSS tooling blank at MSC:

http://www.mscdirect.com/IWCatSectio...artFlow=t&M e
rchant_Id=1&p_section_Id=747&Section_Id=747&p_prod uct_type_Id=417&ShowProduc
tList=t&p_att_type_id_0=27315&p_att_value_id_0=217 20&p_search_flag_0=1&p_att
_type_id_1=21901&p_att_value_id_1=339267&p_search_ flag_1=1&p_att_type_id_2=2
7314&p_att_value_id_2=294062&p_search_flag_2=1&Sel ectedAtt.length=3&pbegin=0
&pcount=15&NameVector%5B0%5D.Name=Square+Size&Name Vector%5B0%5D.Value=.5000&
NameVector%5B1%5D.Name=Material&NameVector%5B1%5D. Value=HSS&NameVector%5B2%5
D.Name=Overall+Length&NameVector%5B2%5D.Value=8.00 00&NameVector.length=3&Vie
w.x.x=87&View.x.y=10

Ian


"blabla" wrote in message
news:QQYQb.264963$JQ1.32678@pd7tw1no...
Oops - square and rectangular stock 1/4" x 1/2" and 1/2" x 1/2", 8" or
more
"Bridger" wrote in message
...
On Sun, 25 Jan 2004 22:40:34 GMT, "blabla" wrote:

Looking for HSS blanks preferably hardend already.

Thanx Mat



blank whats?