Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Try, try again - floor poly questions (or, to gloss, or not to gloss)
Posted a question here a couple weeks ago or so regarding floor poly.
Given some excellent advice here, I thought I was finished after laying down the "final" coat, resorting to a satin finish (over the previous coats of problematic semi gloss). Except that I don't like the way satin looks in the kitchen. It's a very matte finish. Doesn't make the walnut "pop". So, I want to lay the final-final coat, either in semi gloss, or straight up gloss. What are the pros and cons (in a kitchen, particularly) of these 2 finishes. I already have found that semi gloss is a pain to get to look right, being mighty picky about overlaps when laying it down and showing any little speck that may have found it's way into the finish while it was drying. I'm interested in both application differences and stuff like wear, appearance, etc. plus any thing that might be of particular note for a kitchen. And, any tricks that might be useful. Way back when, having sanded nearly an 1/8" off an existing oak floor ('nother house), applying the finish was problem free and fast (using the l-w pads). Also, I'm finding that using the lamb's wool pad is making it very difficult to lay down the manufacturer recommended amount - 800-900 sq ft/gallon and I'm getting about ~500sq ft/gal. I'm pouring a stream of finish in a line down the floor then coming at it with the pad. But, I"m thinking maybe I ought go round up one of those T-Bars that was recommended here. Agree? Or is there a way to correct this using the pads? Thanx Renata |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
help! applying semi-gloss poly onto floor... | Woodworking | |||
Does semi-gloss poly become less glossy with each application? | Woodworking | |||
Mix satin and gloss poly? | Woodworking | |||
Haze on Semi-gloss Poly | Woodworking | |||
Aquatech Gloss not opaque after 1 undercoat 1 gloss coat. Glidden Trade acrylic. | UK diy |