CC wrote:
Thanks Lee, But Upscale had the right ones, "kerf Keepers".
I wanted to be able to support both sides of a long cutoff and
to keep them from closing up when being cut, I saw plans for
making some out of a couple pieces of flat metal hangers but
if I can find these I'd be a lot happier

There appears to be a set of three Jorgensen "Kerfkeepers" up on ebay
at the moment
http://cgi.ebay.com/Lot-of-3-PONY-%2...16106008r24841.

If that link doesn't work just go to ebay and search on "kerfkeepers".
Right now they're at about 20 bucks for the three with three days to
go.

CC

"Lee Gordon" wrote in message
. ..
Not sure if this is what you are talking about, but it performs
basically the same function.

http://www.microjig.com/MJ%20Splitter.htm

Lee

--
To e-mail, replace "bucketofspam" with "dleegordon"

_________________________________
Lee Gordon
http://www.leegordonproductions.com

--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)

I found that after learning what they were called and have bid on them
thanks
CC

"J. Clarke" wrote in message
...
CC wrote:
Thanks Lee, But Upscale had the right ones, "kerf Keepers".
I wanted to be able to support both sides of a long cutoff and
to keep them from closing up when being cut, I saw plans for
making some out of a couple pieces of flat metal hangers but
if I can find these I'd be a lot happier

There appears to be a set of three Jorgensen "Kerfkeepers" up on
ebay
at the moment
http://cgi.ebay.com/Lot-of-3-PONY-%2...16106008r24841.

If that link doesn't work just go to ebay and search on
"kerfkeepers".
Right now they're at about 20 bucks for the three with three days to
go.

CC

"Lee Gordon" wrote in message
. ..
Not sure if this is what you are talking about, but it performs
basically the same function.

http://www.microjig.com/MJ%20Splitter.htm

Lee

--
To e-mail, replace "bucketofspam" with "dleegordon"

_________________________________
Lee Gordon
http://www.leegordonproductions.com

--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)

"CC" wrote in message
I found that after learning what they were called and have bid on them
thanks

One thing to check on if you're buying used and pick them up in person. Make
sure the vertical part that's welded to the bottom piece isn't about to
break off. They're the weakest part of the assembly. The two I have never
reached that point, but I did notice how easily the vertical parts would
bend where they were welded on. Repeated unintentional bending would weaken
that area to the point of separating.

"Upscale" wrote in message
...

"CC" wrote in message
I found that after learning what they were called and have bid on
them
thanks

One thing to check on if you're buying used and pick them up in
person. Make
sure the vertical part that's welded to the bottom piece isn't about
to
break off. They're the weakest part of the assembly. The two I have
never
reached that point, but I did notice how easily the vertical parts
would
bend where they were welded on. Repeated unintentional bending would
weaken
that area to the point of separating.


I will keep that in mind if I can find a set to look at first, I
emailed Jorgenson and they
said they had not made them in about 15 years or longer, They also did
not know of
anyone making anything similar. I'm trying to get a set used now, If
not, I will make something
that will work
CC