Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
JoeV
 
Posts: n/a
Default TopSaver System - Rust Removal Excellent!

Just began pulling my tools out of storage after a year of
construction on our house for multiple additions (and new shop).
Began sanding the rust and corrosion off (contractors like to set
coffee cups on cast iron, etc.) but took a break to visit Woodcraft.
They recommended trying a new cleaner / protectorant called TopSaver
instead. I've tried many things, topcote, special wax, and the others,
with not much success to date.

With a little elbow grease (and I mean a little), all of the rust and
corrosion came off. The top looks like new!! Too early to tell how
well it protects going forward, but this worked soooo well, I just had
to pass it along.

Joe
  #2   Report Post  
Rick
 
Posts: n/a
Default TopSaver System - Rust Removal Excellent!

Not pointing any accusatory fingers, but its surprising that we got a demo
sample of this in the mail today at the office. (We are a large machinery
dealer)

Rick


"JoeV" wrote in message
om...
Just began pulling my tools out of storage after a year of
construction on our house for multiple additions (and new shop).
Began sanding the rust and corrosion off (contractors like to set
coffee cups on cast iron, etc.) but took a break to visit Woodcraft.
They recommended trying a new cleaner / protectorant called TopSaver
instead. I've tried many things, topcote, special wax, and the others,
with not much success to date.

With a little elbow grease (and I mean a little), all of the rust and
corrosion came off. The top looks like new!! Too early to tell how
well it protects going forward, but this worked soooo well, I just had
to pass it along.

Joe



  #3   Report Post  
RWM
 
Posts: n/a
Default TopSaver System - Rust Removal Excellent!


"JoeV" wrote in message
om...
Just began pulling my tools out of storage after a year of
construction on our house for multiple additions (and new shop).
Began sanding the rust and corrosion off (contractors like to set
coffee cups on cast iron, etc.) but took a break to visit Woodcraft.
They recommended trying a new cleaner / protectorant called TopSaver
instead. I've tried many things, topcote, special wax, and the others,
with not much success to date.

With a little elbow grease (and I mean a little), all of the rust and
corrosion came off. The top looks like new!! Too early to tell how
well it protects going forward, but this worked soooo well, I just had
to pass it along.

Joe


I am also pleased with the results. I have only been using it for about six
weeks, and only for regular maintenance, but it has met all of my
expectations. I think that it is silly that they include the pad and paper
towels, but I am sure that there is a reason for it.

Bob McBreen - Yarrow Point Washington


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Closed system open system raditors Adam Topp UK diy 6 September 16th 03 06:14 PM
Radiators and CH system... Christian McArdle UK diy 4 September 2nd 03 04:10 PM
CH system has no vent on primary Keith Refson - real email address in signature UK diy 8 August 27th 03 04:28 PM
Water system problem BigWallop UK diy 2 August 8th 03 11:12 AM
mains Hot water, and do I convert open heating to a closed heating system Ian Tracey UK diy 5 July 18th 03 09:55 AM


All times are GMT +1. The time now is 01:43 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"